FreeBSD 12 Installer Display Pixelated
<ESC> mode 2 boot
Linux grub Config
menuentry "FreeBSD" {
insmod ufs2
insmod bsd
set root=(hd0,7)
chainloader /boot/boot1.efi
}
Loader Config
loader(8) interpreter has been switched from 4th to Lua
Lua-based loader(8) does not pick up /boot/loader.rc.local
gop set (nor mode) load from /boot/loader.rc.local at boot (manual works)
/boot/loader.rc NOT parsed /boot/loader.rc.local NOT parsed /boot/loader.conf parsed, but EFI-mode don't like modules
exec="mode 2"
[...] kld_list="/boot/modules/i915kms.ko" [...]
Changing Console Resolution
YouTube: Improving security of the FreeBSD boot process TPM and Secure Boot in FreeBSD by Michal Stanek
BSDCan 2019: Improving security of the FreeBSD boot process
Kernel Boot Resolution?
Changing console resolution in FreeBSD 10 with vt(4)
Configuring default resolution for FreeBSD 11 with UEFI
UEFI GOP: screen goes blank during boot after loader is finished
console driver
old: sc — the console driver
new: vt — virtual terminal console driver
wpa_supplicant
# already installed from base-system
$ whereis wpa_supplicant
wpa_supplicant: /usr/sbin/wpa_supplicant
/usr/share/man/man8/wpa_supplicant.8.gz
/usr/ports/security/wpa_supplicant
bash
$ pkg install bash $ pw user mod andreas -s /usr/local/bin/bash
# pkg install drm-kmod-g20190710
Updating FreeBSD repository catalogue...
FreeBSD repository is up to date.
All repositories are up to date.
The following 3 package(s) will be affected (of 0 checked):
New packages to be INSTALLED:
drm-kmod: g20190710
drm-fbsd12.0-kmod: 4.16.g20190710
gpu-firmware-kmod: g20190620
Number of packages to be installed: 3
The process will require 44 MiB more space.
5 MiB to be downloaded.
Proceed with this action? [y/N]: y
[1/3] Fetching drm-kmod-g20190710.txz: 100% 808 B 0.8kB/s 00:01
[2/3] Fetching drm-fbsd12.0-kmod-4.16.g20190710.txz: 100% 2 MiB 412.1kB/s 00:05
[3/3] Fetching gpu-firmware-kmod-g20190620.txz: 100% 3 MiB 518.7kB/s 00:07
Checking integrity... done (0 conflicting)
[1/3] Installing gpu-firmware-kmod-g20190620...
[1/3] Extracting gpu-firmware-kmod-g20190620: 100%
[2/3] Installing drm-fbsd12.0-kmod-4.16.g20190710...
[2/3] Extracting drm-fbsd12.0-kmod-4.16.g20190710: 100%
[3/3] Installing drm-kmod-g20190710...
Message from drm-fbsd12.0-kmod-4.16.g20190710:
The drm-fbsd12.0-kmod port can be enabled for amdgpu (for AMD GPUs starting
with the HD7000 series / Tahiti) or i915kms (for Intel APUs starting with
HD3000 / Sandy Bridge) through kld_list in /etc/rc.conf. radeonkms for older
AMD GPUs can be loaded and there are some positive reports if EFI boot is NOT
enabled (similar to amdgpu).
For amdgpu: kld_list="amdgpu"
For Intel: kld_list="/boot/modules/i915kms.ko"
For radeonkms: kld_list="/boot/modules/radeonkms.ko"
Please ensure that all users requiring graphics are members of the
"video" group.
Older generations are supported by the legacy kms modules (radeonkms /
i915kms) in base or by installing graphics/drm-legacy-kmod.
---<<BOOT>>---
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-RELEASE-p7 GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(efifb): resolution 1024x768
CPU: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz (2494.39-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x1fbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 4002455552 (3817 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <SECCSD LH43STAR>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Launching APs: 1 2 3
Timecounter "TSC-low" frequency 1247193490 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff810f9a00, 0) error 19
nexus0
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto> on motherboard
acpi0: <SECCSD LH43STAR> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xe0000000-0xe0ffffff,0xb0000000-0xbfffffff,0xc0000000-0xc1ffffff at device 0.0 on pci1
vgapci1: <VGA-compatible display> port 0x4000-0x403f mem 0xe1000000-0xe13fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
vgapci1: Boot video device
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xe160a000-0xe160a3ff at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
hdac0: <Intel Cougar Point HDA Controller> mem 0xe1600000-0xe1603fff at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
iwn0: <Intel Centrino Wireless-N 130> mem 0xe1500000-0xe1501fff at device 0.0 on pci2
pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xe1404000-0xe1404fff,0xe1400000-0xe1403fff at device 0.0 on pci3
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: e8:03:9a:1a:a5:bc
re0: netmap queues/slots: TX 1/256, RX 1/256
ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xe1609000-0xe16093ff at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Cougar Point AHCI SATA controller> port 0x4088-0x408f,0x4094-0x4097,0x4080-0x4087,0x4090-0x4093,0x4060-0x407f mem 0xe1608000-0xe16087ff at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,33 and 24,25 on hdaa0
hdacc1: <Intel Cougar Point HDA CODEC> at cad 3 on hdac0
hdaa1: <Intel Cougar Point Audio Function Group> at nid 1 on hdacc1
pcm1: <Intel Cougar Point (HDMI/DP 8ch)> at nid 5 on hdaa1
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen0.1: <Intel EHCI root HUB> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WDS240G2G0A-00JH30 UF450000> ACS-2 ATA SATA 3.x device
ada0: Serial Number 183773804130
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 228944MB (468877312 512 byte sectors)
ses0 at ahciem0 bus 0 scbus4 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
cd0 at ahcich2 bus 0 scbus1 target 0 lun 0
cd0: <Slimtype DVD A DS8A5SH XS21> Removable CD-ROM SCSI device
cd0: Serial Number 110270143545
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Trying to mount root from ufs:/dev/ada0p7 [rw]...
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
drmn1: <drmn> on vgapci1
vgapci1: child drmn1 requested pci_enable_io
vgapci1: child drmn1 requested pci_enable_io
[drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19).
Failed to add WC MTRR for [0xd0000000-0xdfffffff]: -28; performance may suffer
[drm] Got stolen memory base 0xaba00000, size 0x4000000
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] Connector LVDS-1: get mode from tunables:
[drm] - kern.vt.fb.modes.LVDS-1
[drm] - kern.vt.fb.default_mode
[drm] Connector VGA-1: get mode from tunables:
[drm] - kern.vt.fb.modes.VGA-1
[drm] - kern.vt.fb.default_mode
[drm] Connector HDMI-A-1: get mode from tunables:
[drm] - kern.vt.fb.modes.HDMI-A-1
[drm] - kern.vt.fb.default_mode
[drm] Connector DP-1: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-1
[drm] - kern.vt.fb.default_mode
[drm] Initialized i915 1.6.0 20171222 for drmn1 on minor 0
VT: Replacing driver "efifb" with new "fb".
start FB_INFO:
type=11 height=768 width=1366 depth=32
cmsize=16 size=4227072
pbase=0xd0361000 vbase=0xfffff800d0361000
name=drmn1 flags=0x0 stride=5504 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn1: fb0: inteldrmfb frame buffer device
lo0: link state changed to UP
re0: link state changed to DOWN
ugen1.2: <vendor 0x8087 product 0x0024> at usbus1
uhub2 on uhub0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub3 on uhub1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
uhub2: 6 ports with 6 removable, self powered
uhub3: 6 ports with 6 removable, self powered
ugen1.3: <Logitech USB Receiver> at usbus1
ukbd0 on uhub2
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 3> on usbus1
kbd2 at ukbd0
ugen0.3: <Image Processor WebCam SC-0311139N> at usbus0
ugen1.4: <vendor 0x8086 product 0x0189> at usbus1
ums0 on uhub2
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 3> on usbus1
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0 on uhub2
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 3> on usbus1
ubt0 on uhub2
ubt0: <vendor 0x8086 product 0x0189, class 224/1, rev 2.00/69.19, addr 4> on usbus1
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
re0: link state changed to UP
WARNING: attempt to domain_add(netgraph) after domainfinalize()
Security policy loaded: MAC/ntpd (mac_ntpd)
---<<BOOT>>---
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-RELEASE r341666 GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(efifb): resolution 1024x768
CPU: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz (2494.39-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x1fbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 4002455552 (3817 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <SECCSD LH43STAR>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Launching APs: 1 2 3
Timecounter "TSC-low" frequency 1247195878 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff810f9770, 0) error 19
nexus0
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto> on motherboard
acpi0: <SECCSD LH43STAR> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xe0000000-0xe0ffffff,0xb0000000-0xbfffffff,0xc0000000-0xc1ffffff at device 0.0 on pci1
vgapci1: <VGA-compatible display> port 0x4000-0x403f mem 0xe1000000-0xe13fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
vgapci1: Boot video device
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xe160a000-0xe160a3ff at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
hdac0: <Intel Cougar Point HDA Controller> mem 0xe1600000-0xe1603fff at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
iwn0: <Intel Centrino Wireless-N 130> mem 0xe1500000-0xe1501fff at device 0.0 on pci2
pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xe1404000-0xe1404fff,0xe1400000-0xe1403fff at device 0.0 on pci3
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: e8:03:9a:1a:a5:bc
re0: netmap queues/slots: TX 1/256, RX 1/256
ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xe1609000-0xe16093ff at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Cougar Point AHCI SATA controller> port 0x4088-0x408f,0x4094-0x4097,0x4080-0x4087,0x4090-0x4093,0x4060-0x407f mem 0xe1608000-0xe16087ff at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,33 and 24,25 on hdaa0
hdacc1: <Intel Cougar Point HDA CODEC> at cad 3 on hdac0
hdaa1: <Intel Cougar Point Audio Function Group> at nid 1 on hdacc1
pcm1: <Intel Cougar Point (HDMI/DP 8ch)> at nid 5 on hdaa1
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen0.1: <Intel EHCI root HUB> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WDS240G2G0A-00JH30 UF450000> ACS-2 ATA SATA 3.x device
ada0: Serial Number 183773804130
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 228944MB (468877312 512 byte sectors)
ses0 at ahciem0 bus 0 scbus4 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
cd0 at ahcich2 bus 0 scbus1 target 0 lun 0
cd0: <Slimtype DVD A DS8A5SH XS21> Removable CD-ROM SCSI device
cd0: Serial Number 110270143545
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Trying to mount root from ufs:/dev/ada0p7 [rw]...
lo0: link state changed to UP
re0: link state changed to DOWN
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub2 on uhub1
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen1.2: <vendor 0x8087 product 0x0024> at usbus1
uhub3 on uhub0
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
uhub2: 6 ports with 6 removable, self powered
uhub3: 6 ports with 6 removable, self powered
ugen1.3: <Logitech USB Receiver> at usbus1
ukbd0 on uhub3
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 3> on usbus1
kbd2 at ukbd0
ugen0.3: <Image Processor WebCam SC-0311139N> at usbus0
re0: link state changed to UP
ugen1.4: <vendor 0x8086 product 0x0189> at usbus1
ums0 on uhub3
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 3> on usbus1
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0 on uhub3
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 3> on usbus1
re0: link state changed to DOWN
re0: link state changed to UP
ubt0 on uhub3
ubt0: <vendor 0x8086 product 0x0189, class 224/1, rev 2.00/69.19, addr 4> on usbus1
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
Security policy loaded: MAC/ntpd (mac_ntpd)
re0: link state changed to DOWN
re0: link state changed to UP
info: [drm] Initialized drm 1.1.0 20060810
drmn1: =======================================================
drmn1: This code is obsolete abandonware. Install the graphics/drm-legacy-kmod pkg
drmn1: =======================================================
drmn1: Deprecated code (to be removed in FreeBSD 13): drm2 drivers
drmn1: =======================================================
drmn1: This code is obsolete abandonware. Install the graphics/drm-legacy-kmod pkg
drmn1: =======================================================
drmn1: Deprecated code (to be removed in FreeBSD 13): drm2 drivers
drmn1: <Intel SandyBridge (M)> on vgapci1
info: [drm] Memory usable by graphics device = 2048M
info: [drm] MTRR allocation failed. Graphics performance may suffer.
intel_iicbb0 on drmn1
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
iicbus1: <Philips I2C bus> on intel_gmbus0
iic1: <I2C generic I/O> on iicbus1
intel_iicbb1 on drmn1
iicbus2: <Philips I2C bus> on iicbb1 addr 0xff
iic2: <I2C generic I/O> on iicbus2
iicbus3: <Philips I2C bus> on intel_gmbus1
iic3: <I2C generic I/O> on iicbus3
intel_iicbb2 on drmn1
iicbus4: <Philips I2C bus> on iicbb2 addr 0xff
iic4: <I2C generic I/O> on iicbus4
iicbus5: <Philips I2C bus> on intel_gmbus2
iic5: <I2C generic I/O> on iicbus5
intel_iicbb3 on drmn1
iicbus6: <Philips I2C bus> on iicbb3 addr 0xff
iic6: <I2C generic I/O> on iicbus6
iicbus7: <Philips I2C bus> on intel_gmbus3
iic7: <I2C generic I/O> on iicbus7
intel_iicbb4 on drmn1
iicbus8: <Philips I2C bus> on iicbb4 addr 0xff
iic8: <I2C generic I/O> on iicbus8
iicbus9: <Philips I2C bus> on intel_gmbus4
iic9: <I2C generic I/O> on iicbus9
intel_iicbb5 on drmn1
iicbus10: <Philips I2C bus> on iicbb5 addr 0xff
iic10: <I2C generic I/O> on iicbus10
iicbus11: <Philips I2C bus> on intel_gmbus5
iic11: <I2C generic I/O> on iicbus11
info: [drm] MSI enabled 1 message(s)
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
intel_sdvo_ddc_proxy921920 on drmn1
intel_sdvo_ddc_proxy921920: detached
drm_iic_dp_aux0 on drmn1
drmn1: taking over the fictitious range 0xd0000000-0xe0000000
info: [drm] Connector LVDS-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.LVDS-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector VGA-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.VGA-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector HDMI-A-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.HDMI-A-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector DP-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.DP-1
info: [drm] - kern.vt.fb.default_mode
fbd1 on drmn1
VT: Replacing driver "efifb" with new "fb".
info: [drm] Initialized i915 1.6.0 20080730 for drmn1 on minor 1
info: [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off