File System
$ ls -la /var/services/
total 8
drwxr-xr-x 2 root root 4096 Jul 10 20:20 .
drwxr-xr-x 15 root root 4096 Jul 10 14:21 ..
lrwxrwxrwx+ 1 root root 14 Jul 10 20:20 homes -> /volume1/homes
lrwxrwxrwx 1 root root 24 Jul 9 22:15 pgsql -> /volume1/@database/pgsql
lrwxrwxrwx 1 root root 13 Jul 10 14:21 tmp -> /volume1/@tmp
$ ls -la /volume1/
total 4
drwxr-xr-x 1 root root 244 Jul 10 14:30 .
drwxr-xr-x 22 root root 4096 Jul 10 14:21 ..
drwxrwxrwx+ 1 root root 28 Jul 10 14:30 Applications
drwxr-xr-x 1 root root 120 Jul 9 22:15 @database
drwxrwxrwx+ 1 root root 82 Jul 10 20:20 @eaDir
drwxrwxrwx+ 1 root root 36 Jul 10 20:20 homes
drwxrwxrwx+ 1 root root 28 Jul 10 20:12 Movies
drwxr-xr-x 1 root root 88 Jul 10 14:21 @S2S
drwxrwxrwx+ 1 root root 28 Jul 10 20:13 Source
drwxr-xr-x 1 root root 44 Jul 9 22:18 @synoconfd
drwxr-xr-x 1 SynoFinder SynoFinder 26 Jul 9 22:15 @SynoFinder-etc-volume
drwxr-xr-x 1 SynoFinder SynoFinder 84 Jul 9 22:15 @SynoFinder-log
drwxrwxrwt 1 root root 24 Jul 10 20:20 @tmp
drwxr-xr-x 1 root root 12 Jul 10 14:21 @USBCopy
drwxrwxrwx 1 root root 74 Jul 9 22:15 @userpreference
df
$ df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/md0 2385528 1687400 579344 75% /
devtmpfs 893772 0 893772 0% /dev
tmpfs 897772 60 897712 1% /dev/shm
tmpfs 897772 15808 881964 2% /run
tmpfs 897772 0 897772 0% /sys/fs/cgroup
tmpfs 897772 1128 896644 1% /tmp
/dev/vg1/volume_1 7490355856 83308 7490272548 1% /volume1
mdadm
$ sudo mdadm --detail /dev/md0
/dev/md0:
Version : 0.90
Creation Time : Sat Jul 9 21:39:33 2022
Raid Level : raid1
Array Size : 2490176 (2.37 GiB 2.55 GB)
Used Dev Size : 2490176 (2.37 GiB 2.55 GB)
Raid Devices : 2
Total Devices : 2
Preferred Minor : 0
Persistence : Superblock is persistent
Update Time : Sun Jul 10 20:32:31 2022
State : clean
Active Devices : 2
Working Devices : 2
Failed Devices : 0
Spare Devices : 0
UUID : 1f390363:fd792458:05d949f7:b0bbaec7
Events : 0.67
Number Major Minor RaidDevice State
0 8 17 0 active sync /dev/sata2p1
1 8 1 1 active sync /dev/sata1p1
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.180+ (root@build13) (gcc version 8.5.0 (GCC) ) #42661 SMP Fri Apr 1 15:33:03 CST 2022
[ 0.000000] Command line: root=/dev/md0 intel_iommu=igfx_off netif_num=2 HddEnableDynamicPower=1 syno_hw_version=DS220+ vender_format_version=2 synoboot2 sn=21C0RLR0TNJPQ macs=9009d005b1f3,9009d005b1f4 syno_ttyS0=pciserial,0x0:0x18.0x2,115200 syno_ttyS1=pciserial,0x0:0x18.0x0,115200
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] x86/fpu: xstate_offset[3]: 960, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR'
[ 0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 1088 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x0000000000085fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000086000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000012151000-0x0000000070f9dfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000070f9e000-0x000000007149dfff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000007149e000-0x000000007789dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007789e000-0x0000000077a9dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000077a9e000-0x0000000077addfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000077ade000-0x0000000078d5efff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000078d5f000-0x000000007965efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007965f000-0x0000000079bfffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000079c00000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d3709000-0x00000000d3709fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x01de7398-0x01de73a7] usable ==> usable
[ 0.000000] e820: update [mem 0x59b61a80-0x59b61f49] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x0000000000085fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000086000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000001de7397] usable
[ 0.000000] reserve setup_data: [mem 0x0000000001de7398-0x0000000001de73a7] usable
[ 0.000000] reserve setup_data: [mem 0x0000000001de73a8-0x000000000fffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000010000000-0x0000000012150fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000012151000-0x0000000059b61a7f] usable
[ 0.000000] reserve setup_data: [mem 0x0000000059b61a80-0x0000000059b61f49] usable
[ 0.000000] reserve setup_data: [mem 0x0000000059b61f4a-0x0000000070f9dfff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000070f9e000-0x000000007149dfff] type 20
[ 0.000000] reserve setup_data: [mem 0x000000007149e000-0x000000007789dfff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000007789e000-0x0000000077a9dfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000077a9e000-0x0000000077addfff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x0000000077ade000-0x0000000078d5efff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000078d5f000-0x000000007965efff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000007965f000-0x0000000079bfffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000079c00000-0x000000007fffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000d3709000-0x00000000d3709fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] efi: EFI v2.60 by INSYDE Corp.
[ 0.000000] efi: ACPI=0x77add000 ACPI 2.0=0x77add014 SMBIOS=0x74b45000 SMBIOS 3.0=0x74b43000 ESRT=0x74b46218
[ 0.000000] esrt: Reserving ESRT space from 0x0000000074b46218 to 0x0000000074b46250.
[ 0.000000] SMBIOS 3.0.1 present.
[ 0.000000] Kernel/User page tables isolation: disabled
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x79c00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00FF800000 mask 7FFF800000 write-combining
[ 0.000000] 1 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 2 base 007A000000 mask 7FFE000000 uncachable
[ 0.000000] 3 base 007C000000 mask 7FFC000000 uncachable
[ 0.000000] 4 base 0090000000 mask 7FF0000000 write-combining
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.000000] Base memory trampoline at [ffff88000007a000] 7a000 size 28672
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x01a7a000, 0x01a7afff] PGTABLE
[ 0.000000] BRK [0x01a7b000, 0x01a7bfff] PGTABLE
[ 0.000000] BRK [0x01a7c000, 0x01a7cfff] PGTABLE
[ 0.000000] BRK [0x01a7d000, 0x01a7dfff] PGTABLE
[ 0.000000] BRK [0x01a7e000, 0x01a7efff] PGTABLE
[ 0.000000] BRK [0x01a7f000, 0x01a7ffff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x373c7000-0x379dafff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x0000000077ADD014 000024 (v02 INSYDE)
[ 0.000000] ACPI: XSDT 0x0000000077AB6188 0000F4 (v01 INSYDE INSYDE 00000003 01000013)
[ 0.000000] ACPI: FACP 0x0000000077AD3000 000114 (v06 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x0000000077AC1000 00AE45 (v02 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x0000000077A97000 000040
[ 0.000000] ACPI: FACS 0x0000000077A97000 000040
[ 0.000000] ACPI: UEFI 0x0000000077ADC000 000236 (v01 INSYDE INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x0000000077ADB000 000042 (v01 INSYDE INSYDE 00000002 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000077ADA000 000781 (v01 INSYDE Tpm2Tabl 00001000 ACPI 00040000)
[ 0.000000] ACPI: TPM2 0x0000000077AD9000 000034 (v04 INSYDE INSYDE 00000002 ACPI 00040000)
[ 0.000000] ACPI: BDAT 0x0000000077AD7000 000030 (v02 INSYDE INSYDE 00000000 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x0000000077AD2000 000038 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: LPIT 0x0000000077AD1000 00005C (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x0000000077AD0000 000084 (v03 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x0000000077ACF000 00003C (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: NPKT 0x0000000077ACE000 000065 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: PRAM 0x0000000077ACD000 000030 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: WSMT 0x0000000077ACC000 000028 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000077ABE000 000271 (v02 INSYDE UsbCTabl 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000077ABD000 000937 (v01 INSYDE Platform 00001000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000077ABC000 0005C5 (v02 INSYDE Cpu0Ist 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000077ABB000 00072B (v02 INSYDE CpuSsdt 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000077ABA000 00032D (v02 INSYDE Cpu0Tst 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000077AB9000 00017C (v02 INSYDE ApTst 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000077AB3000 00274C (v02 INSYDE SaSsdt 00003000 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x0000000077AB8000 000044 (v01 INSYDE INSYDE 00000002 ACPI 00040000)
[ 0.000000] ACPI: BGRT 0x0000000077AC0000 000038 (v01 INSYDE INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: DBGP 0x0000000077AD5000 000034 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: DBG2 0x0000000077AD6000 000072 (v00 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: DMAR 0x0000000077AD4000 0000A8 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: WDAT 0x0000000077ABF000 000104 (v01 INSYDE INSYDE 00000000 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x0000000079bfffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x0000000000085fff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000000fffffff]
[ 0.000000] node 0: [mem 0x0000000012151000-0x0000000070f9dfff]
[ 0.000000] node 0: [mem 0x0000000077ade000-0x0000000078d5efff]
[ 0.000000] node 0: [mem 0x000000007965f000-0x0000000079bfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000079bfffff]
[ 0.000000] On node 0 totalpages: 460275
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 23 pages reserved
[ 0.000000] DMA zone: 3972 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7130 pages used for memmap
[ 0.000000] DMA32 zone: 456303 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SYNO Spinup Group 0: 1
[ 0.000000] SYNO Spinup Group 1: 1
[ 0.000000] SYNO Spinup Group Delay: 11
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00086000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x01de7000-0x01de7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x01de7000-0x01de7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x10000000-0x12150fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x59b61000-0x59b61fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x59b61000-0x59b61fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x70f9e000-0x7149dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7149e000-0x7789dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7789e000-0x77a9dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x77a9e000-0x77addfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78d5f000-0x7965efff]
[ 0.000000] e820: [mem 0x80000000-0xd3708fff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff880070800000 s95128 r8192 d31848 u524288
[ 0.000000] pcpu-alloc: s95128 r8192 d31848 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 453058
[ 0.000000] Kernel command line: root=/dev/md0 intel_iommu=igfx_off netif_num=2 HddEnableDynamicPower=1 syno_hw_version=DS220+ vender_format_version=2 synoboot2 sn=21C0RLR0TNJPQ macs=9009d005b1f3,9009d005b1f4 syno_ttyS0=pciserial,0x0:0x18.0x2,115200 syno_ttyS1=pciserial,0x0:0x18.0x0,115200
[ 0.000000] DMAR: Disable GFX device mapping
[ 0.000000] Internal netif num: 2
[ 0.000000] Support HDD Dynamic Power.
[ 0.000000] Synology Hardware Version: DS220+
[ 0.000000] Vender format version: 2
[ 0.000000] Serial Number: 21C0RLR0TNJPQ
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Memory: 1733544K/1841100K available (5554K kernel code, 867K rwdata, 1820K rodata, 968K init, 664K bss, 107556K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:4352 nr_irqs:1024 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: PIT calibration matches HPET. 1 loops
[ 0.000000] tsc: Detected 1996.710 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3993.42 BogoMIPS (lpj=1996710)
[ 0.011854] pid_max: default: 32768 minimum: 301
[ 0.017011] ACPI: Core revision 20150930
[ 0.034600] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.043827] Security Framework initialized
[ 0.048238] AppArmor: AppArmor initialized
[ 0.052807] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.060281] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.068481] Initializing cgroup subsys io
[ 0.072799] Initializing cgroup subsys memory
[ 0.077657] Initializing cgroup subsys devices
[ 0.082608] Initializing cgroup subsys freezer
[ 0.087599] CPU: Physical Processor ID: 0
[ 0.092033] CPU: Processor Core ID: 0
[ 0.104085] CPU0: Thermal monitoring enabled (TM1)
[ 0.109304] process: using mwait in idle threads
[ 0.114420] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.120345] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.126954] Speculative Store Bypass: Vulnerable
[ 0.134135] Freeing SMP alternatives memory: 24K
[ 0.145830] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.162357] TSC deadline timer enabled
[ 0.162362] smpboot: CPU0: Intel(R) Celeron(R) J4025 CPU @ 2.00GHz (family: 0x6, model: 0x7a, stepping: 0x8)
[ 0.173195] Performance Events: PEBS fmt3+, generic architected perfmon, full-width counters, Intel PMU driver.
[ 0.184418] ... version: 4
[ 0.188884] ... bit width: 48
[ 0.193449] ... generic registers: 4
[ 0.197917] ... value mask: 0000ffffffffffff
[ 0.203841] ... max period: 00007fffffffffff
[ 0.209765] ... fixed-purpose events: 3
[ 0.214233] ... event mask: 000000070000000f
[ 0.220597] x86: Booting SMP configuration:
[ 0.225065] .... node #0, CPUs: #1
[ 0.239923] x86: Booted up 1 node, 2 CPUs
[ 0.244402] smpboot: Total of 2 processors activated (7986.84 BogoMIPS)
[ 0.254521] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.263610] devtmpfs: initialized
[ 0.267518] PM: Registering ACPI NVS region [mem 0x7789e000-0x77a9dfff] (2097152 bytes)
[ 0.276380] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.287161] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.294167] pinctrl core: initialized pinctrl subsystem
[ 0.300132] NET: Registered protocol family 16
[ 0.308935] cpuidle: using governor ladder
[ 0.318333] cpuidle: using governor menu
[ 0.322617] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.330973] ACPI: bus type PCI registered
[ 0.335531] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.345838] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.353418] PCI: Using configuration type 1 for base access
[ 0.365183] ACPI: Added _OSI(Module Device)
[ 0.369673] ACPI: Added _OSI(Processor Device)
[ 0.374622] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.379869] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.390625] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.408372] ACPI: Dynamic OEM Table Load:
[ 0.412661] ACPI: SSDT 0xFFFF88006BFFB000 000102 (v02 PmRef Cpu0Cst 00003001 INTL 20130117)
[ 0.423024] ACPI: Dynamic OEM Table Load:
[ 0.427311] ACPI: SSDT 0xFFFF88006BFFB200 00015F (v02 PmRef ApIst 00003000 INTL 20130117)
[ 0.437497] ACPI: Dynamic OEM Table Load:
[ 0.441784] ACPI: SSDT 0xFFFF880078A4B240 00008D (v02 PmRef ApCst 00003000 INTL 20130117)
[ 0.452131] ACPI: Interpreter enabled
[ 0.456046] ACPI: (supports S0 S4 S5)
[ 0.460106] ACPI: Using IOAPIC for interrupt routing
[ 0.465686] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.476739] ACPI: Power Resource [DRST] (on)
[ 0.481603] ACPI: Power Resource [DRST] (on)
[ 0.486475] ACPI: Power Resource [DRST] (on)
[ 0.491336] ACPI: Power Resource [DRST] (on)
[ 0.496198] ACPI: Power Resource [DRST] (on)
[ 0.501058] ACPI: Power Resource [DRST] (on)
[ 0.509602] ACPI: Power Resource [WRST] (on)
[ 0.517769] ACPI: Power Resource [FN00] (on)
[ 0.522903] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.529625] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.539468] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[ 0.547056] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.556191] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.568076] PCI host bridge to bus 0000:00
[ 0.572512] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
[ 0.579407] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
[ 0.586980] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
[ 0.594558] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.602136] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.610491] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.618846] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[ 0.627199] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window]
[ 0.635553] pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window]
[ 0.643907] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
[ 0.652262] pci_bus 0000:00: root bus resource [mem 0xfea00000-0xfeafffff window]
[ 0.660617] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff window]
[ 0.668977] pci_bus 0000:00: root bus resource [mem 0xfed01000-0xfed01fff window]
[ 0.677327] pci_bus 0000:00: root bus resource [mem 0xfed03000-0xfed03fff window]
[ 0.685683] pci_bus 0000:00: root bus resource [mem 0xfed06000-0xfed06fff window]
[ 0.694038] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed09fff window]
[ 0.702389] pci_bus 0000:00: root bus resource [mem 0xfed80000-0xfedbffff window]
[ 0.710744] pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1cfff window]
[ 0.719099] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xfeefffff window]
[ 0.727455] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.733585] pci 0000:00:00.0: [8086:31f0] type 00 class 0x060000
[ 0.733911] pci 0000:00:02.0: [8086:3185] type 00 class 0x030000
[ 0.733932] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit]
[ 0.733940] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.733946] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.734280] pci 0000:00:0f.0: [8086:319a] type 00 class 0x078000
[ 0.734331] pci 0000:00:0f.0: reg 0x10: [mem 0xa1212000-0xa1212fff 64bit]
[ 0.734427] pci 0000:00:0f.0: PME# supported from D3hot
[ 0.734722] pci 0000:00:12.0: [8086:31e3] type 00 class 0x010601
[ 0.734746] pci 0000:00:12.0: reg 0x10: [mem 0xa1210000-0xa1211fff]
[ 0.734755] pci 0000:00:12.0: reg 0x14: [mem 0xa121b000-0xa121b0ff]
[ 0.734764] pci 0000:00:12.0: reg 0x18: [io 0x3080-0x3087]
[ 0.734772] pci 0000:00:12.0: reg 0x1c: [io 0x3088-0x308b]
[ 0.734781] pci 0000:00:12.0: reg 0x20: [io 0x3060-0x307f]
[ 0.734790] pci 0000:00:12.0: reg 0x24: [mem 0xa1219000-0xa12197ff]
[ 0.734824] pci 0000:00:12.0: PME# supported from D3hot
[ 0.735070] pci 0000:00:13.0: [8086:31d9] type 01 class 0x060400
[ 0.735141] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
[ 0.735355] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.741540] pci 0000:00:13.2: [8086:31da] type 01 class 0x060400
[ 0.741617] pci 0000:00:13.2: PME# supported from D0 D3hot D3cold
[ 0.741830] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.748030] pci 0000:00:15.0: [8086:31a8] type 00 class 0x0c0330
[ 0.748062] pci 0000:00:15.0: reg 0x10: [mem 0xa1200000-0xa120ffff 64bit]
[ 0.748122] pci 0000:00:15.0: PME# supported from D3hot D3cold
[ 0.748338] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 0.754546] pci 0000:00:16.0: [8086:31ac] type 00 class 0x118000
[ 0.754576] pci 0000:00:16.0: reg 0x10: [mem 0xa1213000-0xa1213fff 64bit]
[ 0.754591] pci 0000:00:16.0: reg 0x18: [mem 0xa1214000-0xa1214fff 64bit]
[ 0.754906] pci 0000:00:18.0: [8086:31bc] type 00 class 0x118000
[ 0.754937] pci 0000:00:18.0: reg 0x10: [mem 0xa1215000-0xa1215fff 64bit]
[ 0.754953] pci 0000:00:18.0: reg 0x18: [mem 0xa1216000-0xa1216fff 64bit]
[ 0.755245] pci 0000:00:18.2: [8086:31c0] type 00 class 0x118000
[ 0.755275] pci 0000:00:18.2: reg 0x10: [mem 0xa1217000-0xa1217fff 64bit]
[ 0.755290] pci 0000:00:18.2: reg 0x18: [mem 0xa1218000-0xa1218fff 64bit]
[ 0.755633] pci 0000:00:1f.0: [8086:31e8] type 00 class 0x060100
[ 0.756021] pci 0000:00:1f.1: [8086:31d4] type 00 class 0x0c0500
[ 0.756083] pci 0000:00:1f.1: reg 0x10: [mem 0xa121a000-0xa121a0ff 64bit]
[ 0.756159] pci 0000:00:1f.1: reg 0x20: [io 0x3040-0x305f]
[ 0.756557] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.756601] pci 0000:01:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.756627] pci 0000:01:00.0: reg 0x18: [mem 0xa1104000-0xa1104fff 64bit]
[ 0.756644] pci 0000:01:00.0: reg 0x20: [mem 0xa1100000-0xa1103fff 64bit]
[ 0.756716] pci 0000:01:00.0: supports D1 D2
[ 0.756718] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.756778] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.764932] pci 0000:00:13.0: PCI bridge to [bus 01]
[ 0.770288] pci 0000:00:13.0: bridge window [io 0x2000-0x2fff]
[ 0.770292] pci 0000:00:13.0: bridge window [mem 0xa1100000-0xa11fffff]
[ 0.770360] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.770403] pci 0000:02:00.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.770430] pci 0000:02:00.0: reg 0x18: [mem 0xa1004000-0xa1004fff 64bit]
[ 0.770446] pci 0000:02:00.0: reg 0x20: [mem 0xa1000000-0xa1003fff 64bit]
[ 0.770519] pci 0000:02:00.0: supports D1 D2
[ 0.770521] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.770582] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.778731] pci 0000:00:13.2: PCI bridge to [bus 02]
[ 0.784086] pci 0000:00:13.2: bridge window [io 0x1000-0x1fff]
[ 0.784090] pci 0000:00:13.2: bridge window [mem 0xa1000000-0xa10fffff]
[ 0.784108] pci_bus 0000:00: on NUMA node 0
[ 0.784911] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.793736] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.802673] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.811609] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.820547] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.829487] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.838427] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.847360] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.857626] ACPI: Enabled 3 GPEs in block 00 to 7F
[ 0.862924] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.869088] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.878129] vgaarb: loaded
[ 0.881135] vgaarb: bridge control possible 0000:00:02.0
[ 0.887145] SCSI subsystem initialized
[ 0.891297] libata version 3.00 loaded.
[ 0.891350] pps_core: LinuxPPS API ver. 1 registered
[ 0.896783] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.906988] PTP clock support registered
[ 0.911452] EFI Variables Facility v0.08 2004-May-17
[ 0.974287] pstore: Registered efi as persistent store backend
[ 0.980628] PCI: Using ACPI for IRQ routing
[ 0.992128] PCI: pci_cache_line_size set to 64 bytes
[ 0.992215] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.992217] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]
[ 0.992219] e820: reserve RAM buffer [mem 0x01de7398-0x03ffffff]
[ 0.992221] e820: reserve RAM buffer [mem 0x59b61a80-0x5bffffff]
[ 0.992222] e820: reserve RAM buffer [mem 0x70f9e000-0x73ffffff]
[ 0.992224] e820: reserve RAM buffer [mem 0x78d5f000-0x7bffffff]
[ 0.992226] e820: reserve RAM buffer [mem 0x79c00000-0x7bffffff]
[ 0.992516] clocksource: Switched to clocksource hpet
[ 1.006993] AppArmor: AppArmor Filesystem Enabled
[ 1.012162] pnp: PnP ACPI init
[ 1.015617] system 00:00: [io 0x0680-0x069f] has been reserved
[ 1.022077] system 00:00: [io 0x0400-0x047f] has been reserved
[ 1.028680] system 00:00: [io 0x0500-0x05fe] has been reserved
[ 1.035287] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.035889] system 00:01: [mem 0xe0000000-0xefffffff] could not be reserved
[ 1.043490] system 00:01: [mem 0xfea00000-0xfeafffff] has been reserved
[ 1.050870] system 00:01: [mem 0xfed01000-0xfed01fff] has been reserved
[ 1.058253] system 00:01: [mem 0xfed03000-0xfed03fff] has been reserved
[ 1.065632] system 00:01: [mem 0xfed06000-0xfed06fff] has been reserved
[ 1.073012] system 00:01: [mem 0xfed08000-0xfed09fff] has been reserved
[ 1.080391] system 00:01: [mem 0xfed80000-0xfedbffff] has been reserved
[ 1.087772] system 00:01: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 1.095153] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
[ 1.102556] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.102795] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.102967] pnp: PnP ACPI: found 3 devices
[ 1.115747] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.125538] pci 0000:00:13.0: PCI bridge to [bus 01]
[ 1.131023] pci 0000:00:13.0: bridge window [io 0x2000-0x2fff]
[ 1.137822] pci 0000:00:13.0: bridge window [mem 0xa1100000-0xa11fffff]
[ 1.145400] pci 0000:00:13.2: PCI bridge to [bus 02]
[ 1.150929] pci 0000:00:13.2: bridge window [io 0x1000-0x1fff]
[ 1.157728] pci 0000:00:13.2: bridge window [mem 0xa1000000-0xa10fffff]
[ 1.165308] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 1.165311] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
[ 1.165313] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 1.165315] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 1.165318] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 1.165320] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 1.165322] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[ 1.165325] pci_bus 0000:00: resource 11 [mem 0x7c000001-0x7fffffff window]
[ 1.165327] pci_bus 0000:00: resource 12 [mem 0x80000000-0xbfffffff window]
[ 1.165329] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xefffffff window]
[ 1.165332] pci_bus 0000:00: resource 14 [mem 0xfea00000-0xfeafffff window]
[ 1.165334] pci_bus 0000:00: resource 15 [mem 0xfed00000-0xfed003ff window]
[ 1.165336] pci_bus 0000:00: resource 16 [mem 0xfed01000-0xfed01fff window]
[ 1.165338] pci_bus 0000:00: resource 17 [mem 0xfed03000-0xfed03fff window]
[ 1.165341] pci_bus 0000:00: resource 18 [mem 0xfed06000-0xfed06fff window]
[ 1.165343] pci_bus 0000:00: resource 19 [mem 0xfed08000-0xfed09fff window]
[ 1.165345] pci_bus 0000:00: resource 20 [mem 0xfed80000-0xfedbffff window]
[ 1.165347] pci_bus 0000:00: resource 21 [mem 0xfed1c000-0xfed1cfff window]
[ 1.165350] pci_bus 0000:00: resource 22 [mem 0xfee00000-0xfeefffff window]
[ 1.165352] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 1.165354] pci_bus 0000:01: resource 1 [mem 0xa1100000-0xa11fffff]
[ 1.165357] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 1.165359] pci_bus 0000:02: resource 1 [mem 0xa1000000-0xa10fffff]
[ 1.165393] NET: Registered protocol family 2
[ 1.170326] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 1.178256] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 1.185647] TCP: Hash tables configured (established 16384 bind 16384)
[ 1.192910] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 1.199590] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 1.206811] NET: Registered protocol family 1
[ 1.211645] pci 0000:00:02.0: Video device with shadowed ROM
[ 1.213207] PCI: CLS 64 bytes, default 64
[ 1.439940] Trying to unpack rootfs image as initramfs...
[ 3.318198] decompress cpio completed and skip redundant lzma
[ 3.325956] Freeing initrd memory: 6224K
[ 3.330187] DMAR: Host address width 39
[ 3.334440] DMAR: DRHD base: 0x000000fed64000 flags: 0x0
[ 3.340381] DMAR: dmar0: reg_base_addr fed64000 ver 1:0 cap 1c0000c40660462 ecap 9e2ff0505e
[ 3.349682] DMAR: DRHD base: 0x000000fed65000 flags: 0x1
[ 3.355655] DMAR: dmar1: reg_base_addr fed65000 ver 1:0 cap d2008c40660462 ecap f050da
[ 3.364450] DMAR: RMRR base: 0x000000777d7000 end: 0x000000777f6fff
[ 3.371434] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
[ 3.378445] DMAR: No ATSR found
[ 3.382150] DMAR: dmar1: Using Queued invalidation
[ 3.387339] IOMMU passthrough mode = 1
[ 3.391521] DMAR: Hardware identity mapping for device 0000:00:00.0
[ 3.398492] DMAR: Hardware identity mapping for device 0000:00:0f.0
[ 3.405488] DMAR: Hardware identity mapping for device 0000:00:12.0
[ 3.412478] DMAR: Hardware identity mapping for device 0000:00:13.0
[ 3.419466] DMAR: Hardware identity mapping for device 0000:00:13.2
[ 3.426463] DMAR: Hardware identity mapping for device 0000:00:15.0
[ 3.433455] DMAR: Hardware identity mapping for device 0000:00:16.0
[ 3.440442] DMAR: Hardware identity mapping for device 0000:00:18.0
[ 3.447441] DMAR: Hardware identity mapping for device 0000:00:18.2
[ 3.454434] DMAR: Hardware identity mapping for device 0000:00:1f.0
[ 3.461420] DMAR: Hardware identity mapping for device 0000:00:1f.1
[ 3.468420] DMAR: Hardware identity mapping for device 0000:01:00.0
[ 3.475413] DMAR: Hardware identity mapping for device 0000:02:00.0
[ 3.482398] DMAR: Setting RMRR:
[ 3.485901] DMAR: Ignoring identity map for HW passthrough device 0000:00:15.0 [0x777d7000 - 0x777f6fff]
[ 3.496487] DMAR: Prepare 0-16MiB unity mapping for LPC
[ 3.502311] DMAR: Ignoring identity map for HW passthrough device 0000:00:1f.0 [0x0 - 0xffffff]
[ 3.512050] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 3.519276] iommu: Adding device 0000:00:00.0 to group 0
[ 3.525152] iommu: Adding device 0000:00:0f.0 to group 1
[ 3.531068] iommu: Adding device 0000:00:12.0 to group 2
[ 3.536999] iommu: Adding device 0000:00:13.0 to group 3
[ 3.542917] iommu: Adding device 0000:00:13.2 to group 4
[ 3.548841] iommu: Adding device 0000:00:15.0 to group 5
[ 3.554765] iommu: Adding device 0000:00:16.0 to group 6
[ 3.560691] iommu: Adding device 0000:00:18.0 to group 7
[ 3.566610] iommu: Adding device 0000:00:18.2 to group 7
[ 3.572540] iommu: Adding device 0000:00:1f.0 to group 8
[ 3.578461] iommu: Adding device 0000:00:1f.1 to group 8
[ 3.584391] iommu: Adding device 0000:01:00.0 to group 9
[ 3.590316] iommu: Adding device 0000:02:00.0 to group 10
[ 3.597126] audit: initializing netlink subsys (disabled)
[ 3.603017] audit: type=2000 audit(1533243893.313:1): initialized
[ 3.610034] Initialise system trusted keyring
[ 3.671505] VFS: Disk quotas dquot_6.6.0
[ 3.675770] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.906429] Key type asymmetric registered
[ 3.910872] Asymmetric key parser 'x509' registered
[ 3.916342] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 3.924533] io scheduler noop registered
[ 3.928901] io scheduler deadline registered
[ 3.933723] io scheduler cfq registered (default)
[ 3.939461] pcieport 0000:00:13.0: Signaling PME through PCIe PME interrupt
[ 3.947070] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 3.954352] pcie_pme 0000:00:13.0:pcie01: service driver pcie_pme loaded
[ 3.954385] pcieport 0000:00:13.2: Signaling PME through PCIe PME interrupt
[ 3.962120] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 3.969401] pcie_pme 0000:00:13.2:pcie01: service driver pcie_pme loaded
[ 4.596734] tsc: Refined TSC clocksource calibration: 1996.799 MHz
[ 4.603479] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3990bc5adef, max_idle_ns: 881590438240 ns
[ 4.652374] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 4.908432] Linux agpgart interface v0.103
[ 4.926968] brd: module loaded
[ 4.941186] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 4.949817] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 5.043145] dw-apb-uart.1: ttyS1 at MMIO 0xa1215000 (irq = 54, base_baud = 115200) is a 16550A
[ 5.060135] console [ttyS0] disabled
[ 5.063969] dw-apb-uart.2: ttyS0 at MMIO 0xa1217000 (irq = 6, base_baud = 115200) is a 16550A
[ 5.073659] console [ttyS0] enabled
[ 5.081268] bootconsole [earlyser0] disabled
[ 5.090927] Loading iSCSI transport class v2.0-870.
[ 5.100024] ahci 0000:00:12.0: version 3.0
[ 5.100282] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 5.109360] ahci 0000:00:12.0: flags: 64bit ncq sntf clo only pmp pio slum part deso sadm sds apst
[ 5.138394] scsi host0: ahci
[ 5.143164] scsi host1: ahci
[ 5.146486] ata1 : SATA max UDMA/133 abar m2048@0xa1219000 port 0xa1219100 irq 338
[ 5.154979] ata2 : SATA max UDMA/133 abar m2048@0xa1219000 port 0xa1219180 irq 338
[ 5.163641] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 6.354920] i8042: No controller found
[ 6.359182] Delay 11 seconds to wait for disk 1 ready.
[ 6.365004] mousedev: PS/2 mouse device common for all mice
[ 6.383308] rtc-s35390a i2c-RTC35390:00: rtc core: registered rtc-s35390a as rtc0
[ 6.391722] i2c /dev entries driver
[ 6.428897] i801_smbus 0000:00:1f.1: SMBus using polling
[ 6.441645] md: raid1 personality registered for level 1
[ 6.447737] NET: Registered protocol family 17
[ 6.452738] Key type dns_resolver registered
[ 6.493267] mce: Using 7 MCE banks
[ 6.498056] registered taskstats version 1
[ 6.502658] Loading compiled-in untrusted X.509 certificates
[ 6.509001] Loading compiled-in X.509 certificates
[ 6.514399] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329'
[ 6.542500] Loaded X.509 cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089'
[ 6.553824] Loaded X.509 cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28'
[ 6.566821] Loaded X.509 cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5'
[ 6.577843] page_owner is disabled
[ 6.581701] AppArmor: AppArmor sha1 policy hashing enabled
[ 6.588985] rtc-s35390a i2c-RTC35390:00: setting system clock to 2022-07-10 12:20:55 UTC (1657455655)
[ 8.164036] clocksource: Switched to clocksource tsc
[ 13.521104] ata1 (slot 2): link is slow to respond, please be patient (ready=0)
[ 17.103271] ata1 (slot 2): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 17.121935] ata1.00 (slot 2): ATA-10: WDC WD80EFZZ-68BTXN0, 81.00A81, max UDMA/133
[ 17.130391] ata1.00 (slot 2): 15628053168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 17.139434] ata1.00 (slot 2): SN: WD-CA10S80K
[ 17.145446] ata1.00 (slot 2): configured for UDMA/133
[ 17.151555] scsi 0:0:0:0: Direct-Access WDC WD80EFZZ-68BTXN0 0A81 PQ: 0 ANSI: 5
[ 17.161555] got SATA disk[0]
[ 17.164945] sd 0:0:0:0: [sata1] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
[ 17.173900] sd 0:0:0:0: [sata1] 4096-byte physical blocks
[ 17.180027] sd 0:0:0:0: [sata1] Write Protect is off
[ 17.185595] sd 0:0:0:0: [sata1] Mode Sense: 00 3a 00 00
[ 17.185628] sd 0:0:0:0: [sata1] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 17.256926] sata1: p1 p2 p3
[ 17.260497] sd 0:0:0:0: [sata1] Attached SCSI disk
[ 25.720634] ata2 (slot 1): link is slow to respond, please be patient (ready=0)
[ 29.200809] ata2 (slot 1): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 29.218232] ata2.00 (slot 1): ATA-10: WDC WD80EFZZ-68BTXN0, 81.00A81, max UDMA/133
[ 29.226700] ata2.00 (slot 1): 15628053168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 29.235745] ata2.00 (slot 1): SN: WD-CA0Z5GBK
[ 29.241755] ata2.00 (slot 1): configured for UDMA/133
[ 29.247846] scsi 1:0:0:0: Direct-Access WDC WD80EFZZ-68BTXN0 0A81 PQ: 0 ANSI: 5
[ 29.257838] got SATA disk[1]
[ 29.261197] sd 1:0:0:0: [sata2] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
[ 29.270141] sd 1:0:0:0: [sata2] 4096-byte physical blocks
[ 29.276269] sd 1:0:0:0: [sata2] Write Protect is off
[ 29.281826] sd 1:0:0:0: [sata2] Mode Sense: 00 3a 00 00
[ 29.281864] sd 1:0:0:0: [sata2] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 29.338056] sata2: p1 p2 p3
[ 29.341609] sd 1:0:0:0: [sata2] Attached SCSI disk
[ 29.348424] Freeing unused kernel memory: 968K
[ 29.353394] Write protecting the kernel read-only data: 8192k
[ 29.360064] Freeing unused kernel memory: 580K
[ 29.365656] Freeing unused kernel memory: 228K
[ 29.485822] random: nonblocking pool is initialized
[ 29.534802] ACPI: bus type USB registered
[ 29.539321] usbcore: registered new interface driver usbfs
[ 29.545465] usbcore: registered new interface driver hub
[ 29.551425] usbcore: registered new interface driver ethub
[ 29.557573] usbcore: registered new device driver usb
[ 29.581601] xhci_hcd 0000:00:15.0: xHCI Host Controller
[ 29.588630] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
[ 29.798023] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009010
[ 29.807463] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
[ 29.807805] hub 1-0:1.0: USB hub found
[ 29.812025] hub 1-0:1.0: 9 ports detected
[ 29.816560] port1 is going to power up Vbus by GPIO#29(ACTIVE_HIGH)
[ 29.923686] host 0000:00:15.0 port 1 has Vbus GPIO#29 with polarity ACTIVE_HIGH
[ 29.932086] port2 is going to power up Vbus by GPIO#30(ACTIVE_HIGH)
[ 30.039196] host 0000:00:15.0 port 2 has Vbus GPIO#30 with polarity ACTIVE_HIGH
[ 30.048565] xhci_hcd 0000:00:15.0: xHCI Host Controller
[ 30.054429] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
[ 30.062752] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 30.072028] hub 2-0:1.0: USB hub found
[ 30.076858] hub 2-0:1.0: 7 ports detected
[ 30.082696] host 0000:00:15.0 port 1 has Vbus GPIO#29 with polarity ACTIVE_HIGH
[ 30.091100] host 0000:00:15.0 port 2 has Vbus GPIO#30 with polarity ACTIVE_HIGH
[ 30.115937] geminilake_synobios: loading out-of-tree module taints kernel.
[ 30.124529] geminilake_synobios: module license 'Synology Inc.' taints kernel.
[ 30.132601] Disabling lock debugging due to kernel taint
[ 30.149970] synobios open /dev/ttyS1 success
[ 30.165046] correction with 0x00
[ 30.169679] 2022-7-10 12:21:19 UTC
[ 30.173480] synobios: load, major number 201
[ 30.178250] Brand: Synology
[ 30.181368] Model: DS-220+
[ 30.184387] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[ 30.193832] synobios cpu_arch proc entry initialized
[ 30.199380] synobios crypto_hw proc entry initialized
[ 30.205027] synobios syno_platform proc entry initialized
[ 30.216217] Module [geminilake_synobios] is removed.
[ 30.225045] synobios: unload
[ 30.338965] md: md0 stopped.
[ 30.342994] md: bind<sata1p1>
[ 30.346482] md: bind<sata2p1>
[ 30.350388] md/raid1:md0: active with 2 out of 2 mirrors
[ 30.370389] md0: detected capacity change from 0 to 2549940224
[ 30.370839] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[ 30.464686] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[ 30.515054] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[ 31.049113] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[ 31.068204] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[ 31.158627] loop: module loaded
[ 31.207621] EXT4-fs (loop0): couldn't mount as ext3 due to feature incompatibilities
[ 31.278079] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[ 35.491327] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[ 35.515227] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[ 35.719540] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[ 35.759999] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
[ 35.977436] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 35.997714] systemd[1]: Detected architecture x86-64.
[ 36.008827] systemd[1]: Set hostname to <BACHI-NAS>.
[ 36.708037] systemd[1]: Cannot add dependency job for unit synocachepinfiled.service, ignoring: Unit synocachepinfiled.service is masked.
[ 36.722082] systemd[1]: Cannot add dependency job for unit pkg-synobrm-recovery-restart.service, ignoring: Unit pkg-synobrm-recovery-restart.service failed to load: No such file or directory.
[ 36.741208] systemd[1]: Cannot add dependency job for unit pkg-install-low-priority-builtin.service, ignoring: Unit pkg-install-low-priority-builtin.service failed to load: No such file or directory.
[ 36.761068] systemd[1]: Cannot add dependency job for unit pkg-install-high-priority-builtin.service, ignoring: Unit pkg-install-high-priority-builtin.service failed to load: No such file or directory.
[ 36.782453] systemd[1]: Reached target Swap.
[ 36.791119] systemd[1]: Starting Swap.
[ 36.795343] systemd[1]: Reached target Timers.
[ 36.804382] systemd[1]: Starting Timers.
[ 36.808798] systemd[1]: Reached target Paths.
[ 36.817656] systemd[1]: Starting Paths.
[ 36.822238] systemd[1]: Created slice Root Slice.
[ 36.831875] systemd[1]: Starting Root Slice.
[ 36.836768] systemd[1]: Created slice SSDP service.
[ 36.846788] systemd[1]: Starting SSDP service.
[ 36.851856] systemd[1]: Created slice Package Center Slice.
[ 36.863427] systemd[1]: Starting Package Center Slice.
[ 36.869269] systemd[1]: Created slice User and Session Slice.
[ 36.881232] systemd[1]: Starting User and Session Slice.
[ 36.887276] systemd[1]: Created slice Synology Swap Works.
[ 36.898660] systemd[1]: Starting Synology Swap Works.
[ 36.904414] systemd[1]: Created slice Synology DSM Storage Service.
[ 36.917549] systemd[1]: Starting Synology DSM Storage Service.
[ 36.924196] systemd[1]: Created slice BTRFS Space Reclaim.
[ 36.935582] systemd[1]: Starting BTRFS Space Reclaim.
[ 36.941334] systemd[1]: Created slice ScsiTarget's slice.
[ 36.952524] systemd[1]: Starting ScsiTarget's slice.
[ 36.958185] systemd[1]: Created slice synobackup daemon slice.
[ 36.970346] systemd[1]: Starting synobackup daemon slice.
[ 36.976477] systemd[1]: Created slice scemd.
[ 36.985139] systemd[1]: Starting scemd.
[ 36.989530] systemd[1]: Created slice HybridShare's slice.
[ 37.000918] systemd[1]: Starting HybridShare's slice.
[ 37.006677] systemd[1]: Created slice Task Scheduler Group.
[ 37.018258] systemd[1]: Starting Task Scheduler Group.
[ 37.024131] systemd[1]: Created slice Synology Flashcache.
[ 37.035506] systemd[1]: Starting Synology Flashcache.
[ 37.041257] systemd[1]: Listening on Journal Audit Socket.
[ 37.052645] systemd[1]: Starting Journal Audit Socket.
[ 37.058496] systemd[1]: Created slice Synology DSM internal service.
[ 37.071823] systemd[1]: Starting Synology DSM internal service.
[ 37.078549] systemd[1]: Created slice SMBService's slice.
[ 37.089741] systemd[1]: Starting SMBService's slice.
[ 37.095394] systemd[1]: Created slice SNMP.
[ 37.103864] systemd[1]: Starting SNMP.
[ 37.108151] systemd[1]: Created slice SecureSignIn's slice.
[ 37.119719] systemd[1]: Starting SecureSignIn's slice.
[ 37.125568] systemd[1]: Created slice Synology DSM desktop service.
[ 37.138702] systemd[1]: Starting Synology DSM desktop service.
[ 37.145328] systemd[1]: Created slice Synology Cache Advisor.
[ 37.157296] systemd[1]: Starting Synology Cache Advisor.
[ 37.163335] systemd[1]: Created slice Performance alarm.
[ 37.174331] systemd[1]: Starting Performance alarm.
[ 37.179887] systemd[1]: Created slice ActiveInsight's slice.
[ 37.191659] systemd[1]: Starting ActiveInsight's slice.
[ 37.197605] systemd[1]: Created slice Synology Index slice (WAT).
[ 37.210350] systemd[1]: Starting Synology Index slice (WAT).
[ 37.216734] systemd[1]: Listening on udev Control Socket.
[ 37.227926] systemd[1]: Starting udev Control Socket.
[ 37.233692] systemd[1]: Created slice System Slice.
[ 37.243731] systemd[1]: Starting System Slice.
[ 37.248837] systemd[1]: Created slice system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice.
[ 37.264403] systemd[1]: Starting system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice.
[ 37.275619] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 37.288752] systemd[1]: Starting system-serial\x2dgetty.slice.
[ 37.295299] systemd[1]: Reached target Slices.
[ 37.304353] systemd[1]: Starting Slices.
[ 37.308776] systemd[1]: Listening on udev Kernel Socket.
[ 37.319771] systemd[1]: Starting udev Kernel Socket.
[ 37.325428] systemd[1]: Created slice OAuthService's slice.
[ 37.337006] systemd[1]: Starting OAuthService's slice.
[ 37.342856] systemd[1]: Created slice QuickConnect synorelayd group.
[ 37.356185] systemd[1]: Starting QuickConnect synorelayd group.
[ 37.362909] systemd[1]: Created slice Shared Folder Sync.
[ 37.374101] systemd[1]: Starting Shared Folder Sync.
[ 37.379756] systemd[1]: Created slice BTRFS Optimization.
[ 37.390945] systemd[1]: Starting BTRFS Optimization.
[ 37.396599] systemd[1]: Created slice SynoFinder's slice.
[ 37.407788] systemd[1]: Starting SynoFinder's slice.
[ 37.413417] systemd[1]: Listening on Journal Socket.
[ 37.423652] systemd[1]: Starting Journal Socket.
[ 37.433237] systemd[1]: Starting SED Bootup Action...
[ 37.439591] systemd[1]: Starting Disabling fan checking flag ......
[ 37.450458] systemd[1]: Mounting Debug File System...
[ 37.461367] systemd[1]: Starting Journal Socket (/dev/log).
[ 37.476623] systemd[1]: Starting Load Kernel Modules...
[ 37.483136] systemd[1]: Started Machine Check Exception Logging Daemon.
[ 37.494036] systemd[1]: Starting Machine Check Exception Logging Daemon...
[ 37.508491] systemd[1]: Starting Set hostname...
[ 37.519856] systemd[1]: Starting Set time zone information to kernel...
[ 37.530685] systemd[1]: Starting Load ntb_brd module...
[ 37.542357] systemd[1]: Starting Link coredump path to volume if possible...
[ 37.554276] systemd[1]: Starting unbind USB device...
[ 37.566025] systemd[1]: Starting Synology Task Scheduler Init...
[ 37.573432] Monitor-Mwait will be used to enter C-1 state
[ 37.573440] Monitor-Mwait will be used to enter C-2 state
[ 37.573444] Monitor-Mwait will be used to enter C-3 state
[ 37.573455] ACPI: acpi_idle registered with cpuidle
[ 37.576832] systemd[1]: Starting check integrity of rd.gz decompression...
[ 37.589406] systemd[1]: Starting Set boot sequence config...
[ 37.617211] systemd[1]: Mounting Temporary Directory...
[ 37.623328] systemd[1]: Created slice RAID Resync Process. Including Resync, Repair and Reshape..
[ 37.637161] systemd[1]: Starting RAID Resync Process. Including Resync, Repair and Reshape..
[ 37.652832] systemd[1]: Started Set project quota ID for /var/log.
[ 37.662888] systemd[1]: Starting Synology swap...
[ 37.668323] systemd[1]: Created slice FileStation's slice.
[ 37.677838] systemd[1]: Starting FileStation's slice.
[ 37.688964] systemd[1]: Created slice USBCopy's slice.
[ 37.699593] systemd[1]: Starting USBCopy's slice.
[ 37.705069] systemd[1]: Created slice Python2's slice.
[ 37.715677] systemd[1]: Starting Python2's slice.
[ 37.720221] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 37.724206] flashcache: flashcache-1.0-2022-04-01-16:32 initialized
[ 37.732243] flashcache_syno: flashcache-1.0-syno-v25-pin-file-2022-04-01-16:32-debug initialized
[ 37.748011] systemd[1]: Mounted Debug File System.
[ 37.757933] systemd[1]: Mounted Temporary Directory.
[ 37.761238] NET: Registered protocol family 10
[ 37.763709] sit: IPv6 over IPv4 tunneling driver
[ 37.778698] systemd[1]: Started SED Bootup Action.
[ 37.780087] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 37.780235] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 37.800744] systemd[1]: Started Disabling fan checking flag ....
[ 37.813514] systemd[1]: Listening on Journal Socket (/dev/log).
[ 37.826112] systemd[1]: Started Set hostname.
[ 37.828215] r8168 Gigabit Ethernet driver 8.045.12-NAPI loaded
[ 37.834362] Reinit 1 8001
[ 37.834376] Reinit 2 1
[ 37.844331] Reinit 1 8001
[ 37.844344] Reinit 2 1
[ 37.844913] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[ 37.844920] r8168 Copyright (C) 2017 Realtek NIC software team <nicfae@realtek.com>
This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[ 37.844929] r8168 Gigabit Ethernet driver 8.045.12-NAPI loaded
[ 37.851012] Reinit 1 8001
[ 37.851025] Reinit 2 1
[ 37.860987] Reinit 1 8001
[ 37.861000] Reinit 2 1
[ 37.861526] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[ 37.861530] r8168 Copyright (C) 2017 Realtek NIC software team <nicfae@realtek.com>
This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[ 37.864879] usb-storage 1-4:1.0: USB Mass Storage device detected
[ 37.864966] scsi host2: usb-storage 1-4:1.0
[ 37.865043] usbcore: registered new interface driver usb-storage
[ 37.866479] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 37.867254] ehci-pci: EHCI PCI platform driver
[ 37.868448] uhci_hcd: USB Universal Host Controller Interface driver
[ 38.004998] systemd[1]: Started Set time zone information to kernel.
[ 38.019060] systemd[1]: Started Load ntb_brd module.
[ 38.029764] systemd[1]: Started unbind USB device.
[ 38.039913] systemd[1]: Started Synology Task Scheduler Init.
[ 38.052158] systemd[1]: Started check integrity of rd.gz decompression.
[ 38.066053] systemd[1]: Started Set boot sequence config.
[ 38.077642] systemd[1]: Reached target Sockets.
[ 38.086900] systemd[1]: Starting Sockets.
[ 38.097447] systemd[1]: Starting Journal Service...
[ 38.099198] [drm] GuC: No firmware known for this platform!
[ 38.099199] [drm] HuC: No firmware known for this platform!
[ 38.109432] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 38.109433] [drm] Driver supports precise vblank timestamp query.
[ 38.109950] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 38.140835] systemd[1]: Reached target Local File Systems.
[ 38.150646] systemd[1]: Starting Local File Systems.
[ 38.162052] systemd[1]: Starting D-Bus Session Message Bus...
[ 38.169222] systemd[1]: Starting Set boot sequence config for temporary use...
[ 38.181990] systemd[1]: Starting udev Coldplug all Devices...
[ 38.194709] [drm] Finished loading DMC firmware i915/glk_dmc_ver1_04.bin (v1.4)
[ 38.194815] systemd[1]: Starting D-Bus System Message Bus...
[ 38.214026] systemd[1]: Starting Mount usb fs...
[ 38.252961] systemd[1]: Started Set boot sequence config for temporary use.
[ 38.272898] systemd[1]: Started Journal Service.
[ 38.317214] systemd-journald[5581]: Received request to flush runtime journal from PID 1
[ 38.358667] zram: Added device: zram0
[ 38.362937] zram: Added device: zram1
[ 38.662994] md: md1 stopped.
[ 38.667134] md: bind<sata1p2>
[ 38.670602] md: bind<sata2p2>
[ 38.674875] md/raid1:md1: active with 2 out of 2 mirrors
[ 38.710427] md1: detected capacity change from 0 to 2147418112
[ 38.867135] scsi 2:0:0:0: Direct-Access Synology DiskStation PMAP PQ: 0 ANSI: 6
[ 38.877524] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 38.883505] sd 2:0:0:0: [synoboot] 245760 512-byte logical blocks: (126 MB/120 MiB)
[ 38.892765] sd 2:0:0:0: [synoboot] Write Protect is off
[ 38.898647] sd 2:0:0:0: [synoboot] Mode Sense: 23 00 00 00
[ 38.901658] sd 2:0:0:0: [synoboot] No Caching mode page found
[ 38.913535] sd 2:0:0:0: [synoboot] Assuming drive cache: write through
[ 38.929339] synoboot: synoboot1 synoboot2
[ 38.939988] sd 2:0:0:0: [synoboot] Attached SCSI disk
[ 39.034387] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k
[ 39.044154] zram0: detected capacity change from 0 to 552599552
[ 39.053963] Adding 539644k swap on /dev/zram0. Priority:1 extents:1 across:539644k SS
[ 39.063421] zram1: detected capacity change from 0 to 552599552
[ 39.073164] Adding 539644k swap on /dev/zram1. Priority:1 extents:1 across:539644k SS
[ 39.203962] [drm] failed to retrieve link info, disabling eDP
[ 39.217590] [drm] Initialized i915 1.6.0 20171222 for 0000:00:02.0 on minor 0
[ 39.226522] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 39.234847] acpi device:50: registered as cooling_device2
[ 39.240965] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input0
[ 39.251253] evbug: Connected device: input0 (Video Bus at LNXVIDEO/video/input0)
[ 39.252583] [drm] Cannot find any crtc or sizes
[ 39.258607] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 39.290333] usbcore: registered new interface driver usblp
[ 39.381786] usbcore: registered new interface driver usbhid
[ 39.391105] usbhid: USB HID core driver
[ 39.462428] synobios open /dev/ttyS1 success
[ 39.478535] correction with 0x00
[ 39.483614] 2022-7-10 12:21:28 UTC
[ 39.487421] synobios: load, major number 201
[ 39.492198] Brand: Synology
[ 39.495321] Model: DS-220+
[ 39.498345] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[ 39.507796] synobios cpu_arch proc entry initialized
[ 39.513335] synobios crypto_hw proc entry initialized
[ 39.518983] synobios syno_platform proc entry initialized
[ 39.545142] Syno_HddMon: Initialization completed.
[ 39.609441] SSE version of gcm_enc/dec engaged.
[ 42.360428] eth0: 0xffffc9000015e000, 90:09:d0:05:b1:f3, IRQ 340
[ 42.372902] Reinit 1 8001
[ 42.376033] Reinit 2 1
[ 42.388838] Reinit 1 8001
[ 42.391967] Reinit 2 1
[ 42.405010] Reinit 1 8001
[ 42.408139] Reinit 2 1
[ 42.441680] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 43.048444] eth1: 0xffffc9000046c000, 90:09:d0:05:b1:f4, IRQ 341
[ 43.064539] Reinit 1 8001
[ 43.067672] Reinit 2 1
[ 43.080480] Reinit 1 8001
[ 43.083614] Reinit 2 1
[ 43.096490] Reinit 1 8001
[ 43.099620] Reinit 2 1
[ 43.133162] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 45.155558] md: md2 stopped.
[ 45.159746] md: bind<sata1p3>
[ 45.167679] md: bind<sata2p3>
[ 45.195769] md/raid1:md2: active with 2 out of 2 mirrors
[ 45.222826] md2: detected capacity change from 0 to 7990581460992
[ 46.453919] Reinit 1 8001
[ 46.457050] Reinit 2 1
[ 46.470205] r8168: eth0: link up 1 Gbps
[ 46.474526] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 47.300580] raid6: sse2x1 gen() 4664 MB/s
[ 47.321585] raid6: sse2x1 xor() 3050 MB/s
[ 47.342589] raid6: sse2x2 gen() 5550 MB/s
[ 47.363585] raid6: sse2x2 xor() 3507 MB/s
[ 47.384584] raid6: sse2x4 gen() 6300 MB/s
[ 47.405587] raid6: sse2x4 xor() 2589 MB/s
[ 47.410368] raid6: using algorithm sse2x4 gen() 6300 MB/s
[ 47.416411] raid6: .... xor() 2589 MB/s, rmw enabled
[ 47.421962] raid6: using ssse3x2 recovery algorithm
[ 47.437685] xor: measuring software checksum speed
[ 47.452606] prefetch64-sse: 7484.000 MB/sec
[ 47.467585] generic_sse: 6640.000 MB/sec
[ 47.472354] xor: using function: prefetch64-sse (7484.000 MB/sec)
[ 47.546769] Btrfs loaded, crc32c=crc32c-intel
[ 47.552509] BTRFS: device label 2022.07.09-20:15:27 v42661 devid 1 transid 87 /dev/vg1/volume_1
[ 47.562750] BTRFS info (device dm-1): enabling auto syno reclaim space
[ 47.570067] BTRFS info (device dm-1): use ssd allocation scheme
[ 47.576698] BTRFS info (device dm-1): using free space tree
[ 47.582929] BTRFS info (device dm-1): using free block group cache tree
[ 47.590323] BTRFS info (device dm-1): has skinny extents
[ 47.599404] BTRFS info (device dm-1): BTRFS: root of syno feature tree is null
[ 50.964662] Synotify use 16384 event queue size
[ 50.969765] Synotify use 16384 event queue size
[ 51.764072] ata1.00 (slot 2): configured for UDMA/133
[ 51.769728] ata1 (slot 2): EH complete
[ 51.956948] ata2.00 (slot 1): configured for UDMA/133
[ 51.962616] ata2 (slot 1): EH complete
[ 52.283079] capability: warning: `nginx' uses 32-bit capabilities (legacy support in use)
[ 52.959346] ext2: synoboot2 mounted, process=synopkicompatsy
[ 53.023750] synoboot2 unmounted, process=synopkicompatsy
[ 53.480316] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[ 54.084734] iSCSI:target_core_rodsp_server.c:1027:rodsp_server_init RODSP server started, login_key(b3653960a4cc).
[ 54.111628] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized
[ 54.144781] iSCSI:target_core_device.c:613:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288
[ 54.158041] iSCSI:target_core_configfs.c:5777:target_init_dbroot db_root: cannot open: /etc/target
[ 54.168183] iSCSI:target_core_lunbackup.c:361:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully
[ 54.220077] iSCSI:target_core_file.c:152:fd_attach_hba RODSP plugin for fileio is enabled.
[ 54.229342] iSCSI:target_core_file.c:159:fd_attach_hba ODX Token Manager is enabled.
[ 54.238070] iSCSI:target_core_multi_file.c:91:fd_attach_hba RODSP plugin for multifile is enabled.
[ 54.248127] iSCSI:target_core_ep.c:795:ep_attach_hba RODSP plugin for epio is enabled.
[ 54.256986] iSCSI:target_core_ep.c:802:ep_attach_hba ODX Token Manager is enabled.
[ 54.409379] workqueue: max_active 1024 requested for vhost_scsi is out of range, clamping between 1 and 512
[ 55.285420] ext2: synoboot1 mounted, process=syno_bios_log_c
[ 55.362175] vfat: synoboot1 mounted, process=syno_bios_log_c
[ 55.482785] synoboot1 unmounted, process=syno_bios_log_c
[ 55.577935] 8021q: 802.1Q VLAN Support v1.8
[ 61.781654] fuse init (API version 7.23)
[ 61.786748] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 61.814004] audit: type=1325 audit(1657455708.656:2): table=filter family=2 entries=0
[ 61.846391] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 62.141763] audit: type=1325 audit(1657455708.984:3): table=filter family=2 entries=4
[ 62.155633] audit: type=1325 audit(1657455708.998:4): table=filter family=2 entries=8
[ 62.247024] audit: type=1325 audit(1657455709.089:5): table=filter family=2 entries=9
[ 102.361334] audit: type=1325 audit(1657455749.202:6): table=filter family=2 entries=10
[ 102.375654] audit: type=1325 audit(1657455749.216:7): table=filter family=2 entries=9
[ 102.400086] Module [xt_recent] is removed.
[ 102.418501] Module [xt_iprange] is removed.
[ 102.432377] Module [xt_limit] is removed.
[ 102.446378] Module [xt_state] is removed.
[ 102.465708] Module [xt_multiport] is removed.
[ 102.490798] Module [xt_LOG] is removed.
[ 102.506302] Module [nf_conntrack_ipv4] is removed.
[ 102.550325] Module [nf_defrag_ipv4] is removed.
[ 102.578171] audit: type=1325 audit(1657455749.419:8): table=filter family=2 entries=8
[14252.972566] perf interrupt took too long (2530 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[20933.942342] ata2 (slot 1): wake up from deepsleep, reset link now
[20934.052043] ata2: device plugged sstatus 0x133
[20942.723500] ata2 (slot 1): link is slow to respond, please be patient (ready=0)
[20944.943388] ata1 (slot 2): wake up from deepsleep, reset link now
[20945.053575] ata1: device plugged sstatus 0x1
[20945.797385] ata2 (slot 1): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[20945.823254] ata2.00 (slot 1): configured for UDMA/133
[20945.828931] ata2 (slot 1): wake up successful, the reset fail can be ignored
[20953.729697] ata1 (slot 2): link is slow to respond, please be patient (ready=0)
[20956.955826] ata1 (slot 2): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[20956.977539] ata1.00 (slot 2): configured for UDMA/133
[20956.983250] ata1 (slot 2): wake up successful, the reset fail can be ignored
[21002.722969] vfat: synoboot1 mounted, process=synowedjat
[21002.730144] FAT-fs (synoboot1): FAT: nls_disk load default table
[21002.739586] FAT-fs (synoboot1): FAT: nls_io load default table
[21003.153369] synoboot1 unmounted, process=synowedjat
[21228.345439] audit: type=1325 audit(1657476874.369:9): table=filter family=2 entries=4
[21228.359686] audit: type=1325 audit(1657476874.383:10): table=filter family=2 entries=8
[21228.446614] audit: type=1325 audit(1657476874.470:11): table=filter family=2 entries=9
[21269.597095] audit: type=1325 audit(1657476915.620:12): table=filter family=2 entries=10
[21269.611393] audit: type=1325 audit(1657476915.634:13): table=filter family=2 entries=9
[21269.636046] Module [xt_recent] is removed.
[21269.657215] Module [xt_iprange] is removed.
[21269.671789] Module [xt_limit] is removed.
[21269.686251] Module [xt_state] is removed.
[21269.706332] Module [xt_multiport] is removed.
[21269.731388] Module [xt_LOG] is removed.
[21269.746040] Module [nf_conntrack_ipv4] is removed.
[21269.797369] Module [nf_defrag_ipv4] is removed.
[21269.824902] audit: type=1325 audit(1657476915.848:14): table=filter family=2 entries=8
