Romantic Womens Hip-wrapped V-shape Sleeveless Mini Dress Cocktail Party Casual
NEW WOMEN SEXY Ruffle CASUAL FLORAL SUMMER SLEEVELESS PARTY EVENING MINI DRESS
Vintage Black White Plaids Checks Sleeveless Womens Casual Tunic Mini Dress 7005
Casual Mini Sleeveless Korea Women’s Bead Chiffon Dress Summer Sundress New
Black Retro BOHO Collar Bohemia Sleeveless Flower Casual Party Mini Dress
Lady Purple Lace Backless Sexy V Lingerie Dress Nightwear Sleepwear + G strings
Pink Lace Black Hot Sexy Lingerie Dress Nightwear Sleepwear + G-string
Sexy Chiffon Backless Jewel Sleeveless Casual Prom Party Mini Dress
Lady Fancy Dress Costume Outfit Hat Party Festive Sexy Jail Jailhouse Convict

WOMENS UNDERWEAR LINGERIE 1059 SEXY BLACK & PINK GARTER CHEMISE BABYDOLL 10/12
CORSET + STRING MARRON NEUF
CORSET + STRING NEUF

[17:51:13] Loading simulator.
[17:51:13] Loading driver: replicatorg.drivers.gen3.Sanguino3GDriver
[17:52:55] Loading /home/andreas/Downloads/replicatorg-0040/examples/Snake.stl
[17:52:57] /home/andreas/Downloads/replicatorg-0040/examples/Snake.stl
[17:53:03] Connecting to machine using serial port: /dev/ttyUSB0
[17:53:03] Motherboard firmware v2.3 (Cupcake)
[17:53:03] Toolhead 0: Not found.
Make sure the toolhead is connected, the power supply is plugged in and turned on, and the power switch on the motherboard is on.
[17:53:03] 
********************************************************
This version of ReplicatorG is not reccomended for use with firmware before version 3.0. Either update your firmware or proceed with caution.
********************************************************
[17:54:34] Packet response code: Unknown code
[17:54:34] Packet payload: empty
[17:55:11] On tool read: Unknown code
[17:55:11] readFromToolEEPROM null12 2 0
[17:55:11] null read from tool at 12 for tool 0 default 7.0
[17:55:11] On tool read: Unknown code
[17:55:11] readFromToolEEPROM null14 2 0
[17:55:11] null read from tool at 14 for tool 0 default 0.325
[17:55:12] On tool read: Unknown code
[17:55:12] readFromToolEEPROM null16 2 0
[17:55:12] null read from tool at 16 for tool 0 default 36.0

[17:59:51] Connecting to machine using serial port: /dev/ttyUSB0
[17:59:51] Motherboard firmware v2.3 (Cupcake)
[17:59:51] Toolhead 0: Extruder controller firmware v2.5 ()
[17:59:51] 
********************************************************
This version of ReplicatorG is not reccomended for use with firmware before version 3.0. Either update your firmware or proceed with caution.
********************************************************


[18:23:23] Loading simulator.
[18:23:23] Loading driver: replicatorg.drivers.gen3.Sanguino3GDriver
[18:23:26] Connecting to machine using serial port: /dev/ttyUSB0
[18:23:26] Motherboard firmware v3.0 ()
[18:23:26] Toolhead 0: Extruder controller firmware v2.5 ()


[20:11:43] Loading simulator.
[20:11:43] Loading driver: replicatorg.drivers.gen3.Sanguino3GDriver
[20:11:43] Connecting to machine using serial port: /dev/ttyUSB0
[20:11:43] Motherboard firmware v3.0 ()
[20:11:43] Toolhead 0: Extruder controller firmware v3.0 (Extruder

Documentation

github.com/CarbonAeronautics/Manual-Quadcopter-Drone
github.com/StefanScheunemann/Arduino-Drone

thingiverse.com

3D Printed FPV Quadcopter The Crossfire
Crossfire 2
Sony NEX 5(R) Brushless Gimbal

General Info

Quadcopter
DIY Drones
What is Degrees Of Freedom, 6DOF, 9DOF, 10DOF, 11DOF
Custom-Crafted Multicopters
Multicopter Table
Quadrokopter Mikrokopter Webverzeichnis

Algorihms

Kalman-Filter
Sebastian Madgwick’s IMU and AHRS sensor fusion algorithm

Mikrocontroller

Quadcopter with Stellaris Launchpad
VR Multipilot32F4, (Arm Cortex M4) the most powerful Auto Pilot in the world with STM32F4 compatible with arduino. It’s ready to Fly.

Projects

PIXHAWK
Pixhawk at ETH Zurich
Open Source for Drones – PX4 Pro Open Source Autopilot
DroneCode
OpenPilot.org
ArduPilot Autopilot Suite
ArduCopter Multirotor UAV
ArduCopter (old)
dragonCopter

UAVP-NG – The Open Source Next Generation Multicopter

Welcome to the Open Source Next Generation Multicopter
Planet NG – Next Generation Blog Aggregation
UAVP-NG Shop

Brushless Motors

Brushless Outrunner Motor KEDA 20-22l, Fr. 29.90
RCMshop Brushless Motoren
EMP Brushless Outrunner Motor X450/06 KV4000, CHF 18.70
KDS Brushless Motor KDS-WS2632 3500KV, 32.90 CHF
450M Brushless Motor(3500KV)
Leopard Brushless Motor LC5055-6
Emax B Series Motor 2220 1200KV
2830/14 750KV Outrunner Brushless Motor
BC3536-11 750KV Outrunner Brushless Motor
iPower Gimbal Brushless Motor GBM4008H-150T – Hollow Shaft

eBay

ATG 650-X6-16 16mm arm 14“ Prop Glass Folding Frame Hex rotor Hexa Multi-copter

4V-35V to 1.23V-32V Boost Buck Voltage Step Up/Down Converter Regulator
10 Pairs 150mm JST Connector Plug Cable Line Male+Female for RC BEC Lipo Battery
15x 5.5 3K Carbon Fiber Propeller Set CW/CCW Direct Mount FPV Multicopter
4pcs Carbon Fiber 9″ 9443 Propeller Prop CW/CCW DJI Phantom 2 Vision Quadcopter
Pair 10 x 4.5 Carbon Fiber Propeller Prop CW CCW 1045 for RC Multi-Copter Quad
Mystery A2212-15 930KV Brushless Outrunner Motor for 300g-800g RC Helicopter
BE2208-13 DYS Brushless Outrunner Motor 1400 KV 30A ESC
RC Aircraft Helicopter A2212-6 KV2200 Brushless Motor Free Mounts Outrunner
Mini QWERTY Handheld Wireless Bluetooth Keyboard Touchpad Mouse For TV Box PS3

Autopilot Suite

ArduPilot

github.com/ArduPilot/ardupilot/
github.com/ArduPilot/ardupilot/blob/master/libraries/AP_RCProtocol/AP_RCProtocol_CRSF.h

Speedy Bee F4 V3/V4
Speedy Bee F4 AIO

Firmware

stable-4.3.8/speedybeef4v3

YouTube

Building a sub 250g Autonomous Drone with Ardupilot and ExpressLRS AirPort Telemetry

Radio Controller

Jumper

Jumper T-Lite v2

OpenTX

Welcome to OpenTX, last release OpenTX 2.3.15 (2022-04-22)
Franx DIY Car Radio with MultiModule TX

EdgeTX

The EdgeTX project was started on May 6, 2021, as a fork of OpenTX (another open-source radio controller firmware) to create a more optimized, touch-enabled user interface. EdgeTX offers many of the same features as OpenTX. However, it also includes some unique features and improvements over OpenTX, such as a touch-friendly user interface, improved support for Lua scripting, easier integration with third-party hardware, a rapid development cycle, and many other enhancements.
Source: About EdgeTX

Anleitung: Wie man von OpenTX zu EdgeTX wechselt

er9x/ersky/erskyTx

Er9x and ErskyTx Home Page
github.com/MikeBland/mbtx, er9x/ersky9x/erskyTx radio firmware

AliExpress

RadioMaster Pocket
RadioMaster Pocket
Jumper T-Lite v2

Radio Controller Modules

Multiprotocol TX Module (MULTI-Module)

github.com/pascallanger/DIY-Multiprotocol-TX-Module
github.com/opentx/opentx/wiki/OpenTX-Windows-Build-Instructions

GEPRC

GEP-Mark4-7 Frame, $49.99
GEPRC MARK4 7-inch FPV, $239.99 – $269.99

Betaflight

github.com/betaflight/betaflight

Documentation

Receivers (RX)

• Parallel PWM Receivers
• PPM Receivers
• Serial Receivers

Protocol
FPV Protocols Explained (CRSF, SBUS, DSHOT, ACCST, PPM, PWM and more)

• SBUS
• CRSF

ExpressLRS uses the CRSF serial protocol to communicate between the transmitter and the TX module.
ExpressLRS requires CRSFShot or Mixer Sync to ensure full support for high packet rates.
Source: Radio Preparation

Cleanflight

github.com/cleanflight/cleanflight
Betaflight ist ein experimenteller Fork von Cleanflight. Die Performance ist zunehmend besser und spielt in der obersten Liga.

ExpressLRS

Configurator

github.com/ExpressLRS/ExpressLRS-Configurator/releases

Hardware

github.com/ExpressLRS/ExpressLRS-Hardware/tree/master/PCB/2400MHz/RX_Nano
github.com/ExpressLRS/ExpressLRS-Hardware/tree/master/PCB/2400MHz/TX_SX1280
github.com/ExpressLRS/ExpressLRS-Hardware/tree/master/PCB/2400MHz/TX_SX1280_Slim

YouTube Setup

Finally! Quick Set Up For ExpressLRS! How To Wire, Flash, & Program Your ELRS Radio & Receiver!

SpeedyBee

SpeedyBee F405 V3 BLS 50A 30×30 FC&ESC Stack, US$59.99
SpeedyBee F405 V4 BLS 55A 30×30 FC&ESC Stack, US$65.99

Drone

Marken

Rahmen / Frame

Mark4 5 Zoll
Mark4 6 Zoll
Mark4 7 Zoll
Mark4 8 Zoll
Mark4 10 Zoll
Mark4
DJI F450

Flight Controller Firmware

Betaflight
iNav
EMUFlight

Flight Controller

PIXHAWK
SpeedyBee F405 V3

F405 = 1MB Flash, 168 MHz
F722 = 512KB Flash, 216 MHz

AliExpress F405 V3
AliExpress F405 V3
AliExpress F405 V3 + 50A, HGLRC FPV PARTS Store, CHF39.44

AliExpress F405 V4 + 55A, ZDRACING Official Store, CHF58.45
AliExpress F405 V4 + 60A, Mitoot Official Store, CHF64.10

Camera

runcam phoenix 2 sp

Propeller

1050 = 10x5x3
7040 = 7x4x3

Combo

Mark4 7 Zoll + 1300KV BLDC + 7040 Propeller
Mark4 7 Zoll + 1300KV BLDC + 7040 Propeller
Mark4 7 Zoll + 1300KV BLDC + 7040 Propeller + VTX
Mark4 10 Zoll + 1300KV BLDC + 7040 Propeller + VTX
Mark4 5 Zoll + f405 v4 + 1300kv + Gemfan 5236 Propeller + Runruncam Night Eagle 3 v2 + Rush Solo Max Tank 5.8GHz 2.5W

YouTube

How to build a 7-inch long range FPV Drone for $150 in 2024
GEPRC Mark 4 Clone Build (Playlist)

Printables

HSKRC Mark4 8 inch drone carbon frame rear mount
Mark 4 frame full set – vtx , gps , protections
GEPRC Mark4 receiver Antenna Bracket
Mark4 7inch accesories
Mark4 drone frame stack isolator
GEPRC Mark4 Clone Frame Parts [WIP]
GEPRC Mark4 VTX SMA Antenna Mount

Brushed Motor Drones

Flight Controller

AlienWhoop

github.com/brucesdad13/AlienWhoopF0
NotFastEnuf Silverware firmware running the ALIENZER0 target

github.com/brucesdad13/AlienWhoopF7
Latest BetaFlight firmware running the ALIENWHOOPF4 target

LinkedIn: Charles Stevenson

Firmware

github.com/NotFastEnuf/NFE_Silverware
github.com/j1top/Silverware
github.com/phobos-/Silverware

how to move from keil to linux?
github.com/embedded-tools/keil2gcc

ASCII

Reference: Nonprintable and Printable ASCII Characters
ASCII (de)
ASCII (en)

ASCII Art

Text to ASCII Art Generator (TAAG)
Picture to ASCII Convert

Laser
Liste der Lasertypen

BuildLog.Net

BuildLog.Net – Document your builds!
Buildlog.net 2.x Laser

instructables

Build Laser Cutter
The MicroSlice | A tiny Arduino laser cutter
Laser cutter, start slicing stuff for under 50 dollars

Tutorials & How-Tos

RepRap Laser Cutter
DiY. How to build a homemade Router Laser CNC
Lasercutter eigenbau gute Idee?
Tipp – Fräse/Lasercutter im Selbstbau
Der eigene CNC Lasercutter
Home Built 40W CNC Laser
LaserFreak Laser cutter
Laser CUTTER
Do it together Laserbau
Homemade CO2 laser with longitudinal discharge
How to Build a Cutting Laser
DIY Laser: Get Your CO2 Laser Mirrors for FREE
DIY Laser: Increase Your co2 Laser Power for Under $25
DIY Laser: New Laser Tube Installation
DIY CNC CO2 Laser Site
Diane’s Laser Page (DE)
Diane’s Laser Page (EN)
Home-made CNC laser engraver
Poor men’s laser cutter
The DIY laser cutter made out of wood

ThunderSqueak

Sharks with Frikk’n Lasers – or a nostalgic CO2 laser build
DIY gas laser
CO2 Build

Hersteller

Cole Technology Co.,Ltd.
Rabbit Laser USA
Epilog Laser
HPC Laser LTD.
Laserscript Laser
Lightobject
Full Spectrum Laser

China
thunderlaser

Metall-Laser

Selektive Laserschmelzen (englisch Selective Laser Melting, Abk. SLM)
Selektives Lasersintern (SLS)

Aliexpress

co2 Laser tube 350w 400w 500w 10000 lifespan
500w co2 laser tube 40w/60w/80w….200w
500W,400W High Power CO2 Laser Tube
Co2 Laser Glass Tube for Metal Cutting 300W,400W,500W
260w laser cutting machine

Jinan Hongyuan Electric Co., Ltd

eBay

Cole Technology Co.,Ltd.
80W CO2 Laser Tube + Power Supply Engraving Longlife
150W CO2 Laser Tube + Power Supply Life Span > 4000h
150W CO2 Laser Tube + Power Supply Long Life >8000h
Integrated mechanical part for CO2 Laser engraveing cutting machine DIY 50X30CM
15 WATT / 15000 mW ARGON ION BLUE GREEN LASER
UNIVERSAL LASER SYSTEMS UL-25-OEM CO2 Lasers 25W
Industrial 808nm 10000mw 10Watt Infrared Focusable high power laser burning TTL, MADE IN TURKEY 10000mw Laser Diode Module CNC Cutting

USB-Stick unter Windows neu partitionieren

Question

$ ./lmgrd
./lmgrd: No such file or directory

Answer

$ sudo apt-get install lsb

FLEXnet lmgrd daemon not found on Ubuntu
Installing lmgrd on Linux

License

Altera: Floating License Server on Linux/Solaris

Question

amd64:
p11-kit: couldn't load module: /usr/lib/x86_64-linux-gnu/pkcs11/p11-kit-trust.so: /usr/lib/x86_64-linux-gnu/pkcs11/p11-kit-trust.so: cannot open shared object file: No such file or directory

i386:
p11-kit: couldn't load module: /usr/lib/i386-linux-gnu/pkcs11/p11-kit-trust.so: /usr/lib/i386-linux-gnu/pkcs11/p11-kit-trust.so: cannot open shared object file: No such file or directory

Answer

$ sudo apt-get install p11-kit

$ wget https://raw.github.com/spaetzlecode/getlibs/master/getlibs
$ sudo chown root:root getlibs
$ sudo chmod +x getlibs
$ sudo mv -n getlibs /usr/local/bin
$ sudo /usr/local/bin/getlibs -p p11-kit:i386 
$ sudo ln -s /usr/lib32/i386-linux-gnu/pkcs11/p11-kit-trust.so /usr/lib/i386-linux-gnu/pkcs11/p11-kit-trust.so

p11-kit: Typical problem with Wine
Wine can’t find gnome-keyring-pkcs11.so

Datum und Zeit

Wie wird das Datum in Englisch ausgesprochen / geschrieben?

Wird das Datum wie oben erklärt in einem Satz verwendet, werden zusätzlich der Artikel ‘the’ und die Präposition ‘of’ gesprochen, jedoch nicht geschrieben:

• We received your offer on 6 May 2009. Sprich: …on the sixth of May 2009.
• We mailed the letter on 3 April 2008. Sprich: …on the third of April 2008.

Schreibweise / Aussprache des Datums im Englischen

QP active object frameworks for embedded systems
QP Development Kits (QDKs) for Arduino