Live-CD
# mount -u /
# vi /boot/loader.conf
comconsole_speed="115200"
console="comconsole"

# reboot

PC Engines APU BIOS build date: Sep  8 2014
Total memory 4096 MB
AMD G-T40E Processor
CPU MHz=1000
USB MSC blksize=512 sectors=15669248
Press F10 key now for boot menu:
Select boot device:

1. USB MSC Drive Verbatim STORE N GO 1.00
2. AHCI/0: SATA SSD ATA-10 Hard-Disk (15272 MiBytes)
3. Payload [setup]
4. Payload [memtest]

drive 0x000f2a60: PCHS=0/0/0 translation=lba LCHS=975/255/63 s=15669248
drive 0x000f2a90: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=31277232
Booting from Hard Disk...
-
   ______               ____   _____ _____
  |  ____|             |  _ \ / ____|  __ \
  | |___ _ __ ___  ___ | |_) | (___ | |  | |
  |  ___| '__/ _ \/ _ \|  _ < \___ \| |  | |
  | |   | | |  __/  __/| |_) |____) | |__| |
  | |   | | |    |    ||     |      |      |
  |_|   |_|  \___|\___||____/|_____/|_____/
                                                 ```                        `
 ▒▒▒▒▒▒▒▒▒▒▒▒Welcome to FreeBSD▒▒▒▒▒▒▒▒▒▒▒▒▒    s` `.....---.......--.```   -/
 ▒                                         ▒    +o   .--`         /y:`      +.
 ▒  1. Boot Multi user [Enter]             ▒     yo`:.            :o      `+-
 ▒  2. Boot Single user                    ▒      y/               -/`   -o/
 ▒  3. Escape to loader prompt             ▒     .-                  ::/sy+:.
 ▒  4. Reboot                              ▒     /                     `--  /
 ▒                                         ▒    `:                          :`
 ▒  Options:                               ▒    `:                          :`
 ▒  5. Kernel: default/kernel (1 of 1)     ▒     /                          /
 ▒  6. Boot Options                        ▒     .-                        -.
 ▒                                         ▒      --                      -.
 ▒                                         ▒       `:`                  `:`
 ▒                                         ▒         .--             `--.
 ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒            .---.....----.
   Autoboot in 5 seconds, hit [Enter] to boot or any other key to stop

Loading kernel...
/boot/kernel/kernel text=0x1678a68 data=0x1cd288+0x768b40 syms=[0x8+0x174cd8+0x8+0x19224a]
Loading configured modules...
can't find '/boot/entropy'
---<<BOOT>>---
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-RELEASE r341666 GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(vga): resolution 640x480
CPU: AMD G-T40E Processor (1000.02-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x500f20  Family=0x14  Model=0x2  Stepping=0
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT>
  SVM: NP,NRIP,NAsids=8
  TSC: P-state invariant, performance statistics
real memory  = 4815060992 (4592 MB)
avail memory = 4081344512 (3892 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <CORE   COREBOOT>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
arc4random: no preloaded entropy cache
ioapic0 <Version 2.1> irqs 0-23 on motherboard
Launching APs: 1
Timecounter "TSC" frequency 1000020649 Hz quality 800
random: entropy device external interface
kbd0 at kbdmux0
netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff810f9770, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <CORE COREBOOT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 450
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x1000-0x10ff mem 0xf7a00000-0xf7a00fff,0xf7900000-0xf7903fff irq 16 at device 0.0 on pci1
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x2c000000
re0: MAC rev. 0x00200000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 00:0d:b9:3f:73:80
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 5.0 on pci0
pci2: <ACPI PCI bus> on pcib2
re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xf7c00000-0xf7c00fff,0xf7b00000-0xf7b03fff irq 17 at device 0.0 on pci2
re1: Using 1 MSI-X message
re1: ASPM disabled
re1: Chip rev. 0x2c000000
re1: MAC rev. 0x00200000
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1
rgephy1:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re1: Using defaults for TSO: 65518/35/2048
re1: Ethernet address: 00:0d:b9:3f:73:81
re1: netmap queues/slots: TX 1/256, RX 1/256
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0
pci3: <ACPI PCI bus> on pcib3
re2: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xf7e00000-0xf7e00fff,0xf7d00000-0xf7d03fff irq 18 at device 0.0 on pci3
re2: Using 1 MSI-X message
re2: ASPM disabled
re2: Chip rev. 0x2c000000
re2: MAC rev. 0x00200000
miibus2: <MII bus> on re2
rgephy2: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus2
rgephy2:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re2: Using defaults for TSO: 65518/35/2048
re2: Ethernet address: 00:0d:b9:3f:73:82
re2: netmap queues/slots: TX 1/256, RX 1/256
ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0x4010-0x4017,0x4020-0x4023,0x4018-0x401f,0x4024-0x4027,0x4000-0x400f mem 0xf7f04000-0xf7f043ff irq 19 at device 17.0 on pci0
ahci0: AHCI v1.20 with 6 6Gbps ports, Port Multiplier supported
ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f00000-0xf7f00fff irq 18 at device 18.0 on pci0
usbus0 on ohci0
usbus0: 12Mbps Full Speed USB v1.0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xf7f04400-0xf7f044ff irq 17 at device 18.2 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f01000-0xf7f01fff irq 18 at device 19.0 on pci0
usbus2 on ohci1
usbus2: 12Mbps Full Speed USB v1.0
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xf7f04500-0xf7f045ff irq 17 at device 19.2 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
usbus3: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci4: <ACPI PCI bus> on pcib4
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f02000-0xf7f02fff irq 18 at device 20.5 on pci0
usbus4 on ohci2
usbus4: 12Mbps Full Speed USB v1.0
pcib5: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci5: <ACPI PCI bus> on pcib5
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f03000-0xf7f03fff at device 22.0 on pci0
usbus5 on ohci3
usbus5: 12Mbps Full Speed USB v1.0
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xf7f04600-0xf7f046ff at device 22.2 on pci0
usbus6: EHCI version 1.0
usbus6 on ehci2
usbus6: 480Mbps High Speed USB v2.0
acpi_button0: <Power Button> on acpi0
orm0: <ISA Option ROM> at iomem 0xee800-0xeffff pnpid ORM0000 on isa0
uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0
uart0: console (115200,n,8,1)
uart0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0
uart1: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
Timecounters tick every 1.000 msec
arc4random: no preloaded entropy cache
ugen5.1: <ATI OHCI root HUB> at usbus5
ugen6.1: <ATI EHCI root HUB> at usbus6
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
ugen4.1: <ATI OHCI root HUB> at usbus4
ugen3.1: <ATI EHCI root HUB> at usbus3
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen2.1: <ATI OHCI root HUB> at usbus2
ugen1.1: <ATI EHCI root HUB> at usbus1
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <ATI OHCI root HUB> at usbus0
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <SATA SSD S9FM02.0> ACS-3 ATA SATA 3.x device
ada0: Serial Number DE35075218EE01540638
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 15272MB (31277232 512 byte sectors)
Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]...
Root mount waiting for: usbus6 usbus5 usbus4 usbus3 usbus2 usbus1 usbus0
uhub2: 2 ports with 2 removable, self powered
uhub0: 4 ports with 4 removable, self powered
uhub4: 5 ports with 5 removable, self powered
uhub6: 5 ports with 5 removable, self powered
Root mount waiting for: usbus6 usbus3 usbus1
uhub1: 4 ports with 4 removable, self powered
uhub3: 5 ports with 5 removable, self powered
uhub5: 5 ports with 5 removable, self powered
ugen6.2: <Generic Flash Card Reader/Writer> at usbus6
umass0 on uhub1
umass0: <Generic Flash Card Reader/Writer, class 0/0, rev 2.01/1.00, addr 2> on usbus6
umass0:  SCSI over Bulk-Only; quirks = 0x4001
umass0:6:0: Attached to scbus6
Root mount waiting for: usbus1
da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
da0: <Multiple Card  Reader 1.00> Removable Direct Access SPC-2 SCSI device
da0: Serial Number 058F63666485
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
Root mount waiting for: usbus1
ugen1.2: <Verbatim STORE N GO> at usbus1
umass1 on uhub5
umass1: <Verbatim STORE N GO, class 0/0, rev 2.00/1.00, addr 2> on usbus1
umass1:  SCSI over Bulk-Only; quirks = 0xc100
umass1:7:1: Attached to scbus7
mountroot: waiting for device /dev/ufs/FreeBSD_Install...
da1 at umass-sim1 bus 1 scbus7 target 0 lun 0
da1: <Verbatim STORE N GO 1.00> Removable Direct Access SCSI-2 device
da1: Serial Number 12440000000005BA
da1: 40.000MB/s transfers
da1: 7651MB (15669248 512 byte sectors)
da1: quirks=0x2<NO_6_BYTE>
Starting file system checks:
/dev/ufs/FreeBSD_Install: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ufs/FreeBSD_Install: clean, 15378 free (162 frags, 1902 blocks, 0.1% fragmentation)
Mounting local filesystems:.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
random: unblocking device.
32-bit compatibility ldconfig path:
/etc/rc: WARNING: $hostname is not set -- see rc.conf(5).
Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: dd: /entropy: Read-only file system
dd: /boot/entropy: Read-only file system
.
lo0: link state changed to UP
Starting Network: lo0 re0 re1 re2.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
        ire0: link state changed to DOWN
net 127.0.0.1 netmask 0xff000000
        groups: lo
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
re0: flags=8802<BROre1: link state changed to DOWN
ADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGINre2: link state changed to DOWN
G,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
        ether 00:0d:b9:3f:73:80
        media: Ethernet autoselect (10baseT/UTP <half-duplex>)
        status: no carrier
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
re1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
        ether 00:0d:b9:3f:73:81
        media: Ethernet autoselect (10baseT/UTP <half-duplex>)
        status: no carrier
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
        ether 00:0d:b9:3f:73:82
        media: Ethernet autoselect (10baseT/UTP <half-duplex>)
        status: no carrier
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting devd.
Starting Network: re0.
re0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
        ether 00:0d:b9:3f:73:80
        media: Ethernet autoselect (10baseT/UTP <half-duplex>)
        status: no carrier
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting Network: re1.
re1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
        ether 00:0d:b9:3f:73:81
        media: Ethernet autoselect (10baseT/UTP <half-duplex>)
        status: no carrier
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting Network: re2.
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
        ether 00:0d:b9:3f:73:82
        media: Ethernet autoselect (10baseT/UTP <half-duplex>)
        status: no carrier
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Autoloading module: intpm.ko
intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
add host 127.0.0.1: gateway lo0 fib 0: route already in table
add host ::1: gateway lo0 fib 0: route already in table
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Generating host.conf.
eval: cannot create /etc/host.conf: Read-only file system
eval: cannot create /etc/host.conf: Read-only file system
eval: cannot create /etc/host.conf: Read-only file system
Creating and/or trimming log files.
Starting syslogd.
Clearing /tmp (X related).
Starting local daemons:
Welcome to FreeBSD!

Please choose the appropriate terminal type for your system.
Common console types are:
   ansi     Standard ANSI terminal
   vt100    VT100 or compatible terminal
   xterm    xterm terminal emulator (or compatible)
   cons25w  cons25w terminal

Console type [vt100]:

+-----------------------------System Hardening-------------------------------+
| Choose system security hardening options:                                  |
| +------------------------------------------------------------------------+ |
| |[ ] 0 hide_uids       Hide processes running as other users             | |
| |[ ] 1 hide_gids       Hide processes running as other groups            | |
| |[ ] 2 hide_jail       Hide processes running in jails                   | |
| |[ ] 3 read_msgbuf     Disable reading kernel message buffer for unprivil| |
| |[ ] 4 proc_debug      Disable process debugging facilities for unprivile| |
| |[ ] 5 random_pid      Randomize the PID of newly created processes      | |
| |[ ] 6 clear_tmp       Clean the /tmp filesystem on system startup       | |
| |[ ] 7 disable_syslogd Disable opening Syslogd network socket (disables r| |
| |[ ] 8 disable_sendmailDisable Sendmail service                          | |
| |[ ] 9 secure_console  Enable console password prompt                    | |
| |[ ] 10 disable_ddtraceDisallow DTrace destructive-mode                  | |
| +------------------------------------------------------------------------+ |

# gpart show ada0
=>      40  31277152  ada0  GPT  (15G)
        40      1024     1  freebsd-boot  (512K)
      1064  29359104     2  freebsd-ufs  (14G)
  29360168   1564672     3  freebsd-swap  (764M)
  30924840    352352        - free -  (172M)

# mount /dev/ada0p2 /mnt
# vi /mnt/boot/loader.conf

comconsole_speed="115200"
console="comconsole"

# reboot

Loading kernel...
/boot/kernel/kernel text=0x1678a68 data=0x1cd288+0x768b40 syms=[0x8+0x174cd8+0x8+0x19224a]
Loading configured modules...
/boot/entropy size=0x1000
---<<BOOT>>---
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-RELEASE r341666 GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(vga): resolution 640x480
CPU: AMD G-T40E Processor (1000.02-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x500f20  Family=0x14  Model=0x2  Stepping=0
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT>
  SVM: NP,NRIP,NAsids=8
  TSC: P-state invariant, performance statistics
real memory  = 4815060992 (4592 MB)
avail memory = 4081344512 (3892 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <CORE   COREBOOT>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
random: unblocking device.
ioapic0 <Version 2.1> irqs 0-23 on motherboard
Launching APs: 1
Timecounter "TSC" frequency 1000023444 Hz quality 800
random: entropy device external interface
kbd0 at kbdmux0
netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff810f9770, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <CORE COREBOOT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 450
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x1000-0x10ff mem 0xf7a00000-0xf7a00fff,0xf7900000-0xf7903fff irq 16 at device 0.0 on pci1
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x2c000000
re0: MAC rev. 0x00200000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 00:0d:b9:3f:73:80
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 5.0 on pci0
pci2: <ACPI PCI bus> on pcib2
re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xf7c00000-0xf7c00fff,0xf7b00000-0xf7b03fff irq 17 at device 0.0 on pci2
re1: Using 1 MSI-X message
re1: ASPM disabled
re1: Chip rev. 0x2c000000
re1: MAC rev. 0x00200000
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1
rgephy1:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re1: Using defaults for TSO: 65518/35/2048
re1: Ethernet address: 00:0d:b9:3f:73:81
re1: netmap queues/slots: TX 1/256, RX 1/256
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0
pci3: <ACPI PCI bus> on pcib3
re2: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xf7e00000-0xf7e00fff,0xf7d00000-0xf7d03fff irq 18 at device 0.0 on pci3
re2: Using 1 MSI-X message
re2: ASPM disabled
re2: Chip rev. 0x2c000000
re2: MAC rev. 0x00200000
miibus2: <MII bus> on re2
rgephy2: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus2
rgephy2:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re2: Using defaults for TSO: 65518/35/2048
re2: Ethernet address: 00:0d:b9:3f:73:82
re2: netmap queues/slots: TX 1/256, RX 1/256
ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0x4010-0x4017,0x4020-0x4023,0x4018-0x401f,0x4024-0x4027,0x4000-0x400f mem 0xf7f04000-0xf7f043ff irq 19 at device 17.0 on pci0
ahci0: AHCI v1.20 with 6 6Gbps ports, Port Multiplier supported
ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f00000-0xf7f00fff irq 18 at device 18.0 on pci0
usbus0 on ohci0
usbus0: 12Mbps Full Speed USB v1.0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xf7f04400-0xf7f044ff irq 17 at device 18.2 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f01000-0xf7f01fff irq 18 at device 19.0 on pci0
usbus2 on ohci1
usbus2: 12Mbps Full Speed USB v1.0
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xf7f04500-0xf7f045ff irq 17 at device 19.2 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
usbus3: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci4: <ACPI PCI bus> on pcib4
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f02000-0xf7f02fff irq 18 at device 20.5 on pci0
usbus4 on ohci2
usbus4: 12Mbps Full Speed USB v1.0
pcib5: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci5: <ACPI PCI bus> on pcib5
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f03000-0xf7f03fff at device 22.0 on pci0
usbus5 on ohci3
usbus5: 12Mbps Full Speed USB v1.0
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xf7f04600-0xf7f046ff at device 22.2 on pci0
usbus6: EHCI version 1.0
usbus6 on ehci2
usbus6: 480Mbps High Speed USB v2.0
acpi_button0: <Power Button> on acpi0
orm0: <ISA Option ROM> at iomem 0xee800-0xeffff pnpid ORM0000 on isa0
uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0
uart0: console (115200,n,8,1)
uart0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0
uart1: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
Timecounters tick every 1.000 msec
ugen5.1: <ATI OHCI root HUB> at usbus5
ugen6.1: <ATI EHCI root HUB> at usbus6
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
ugen4.1: <ATI OHCI root HUB> at usbus4
ugen3.1: <ATI EHCI root HUB> at usbus3
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen2.1: <ATI OHCI root HUB> at usbus2
ugen1.1: <ATI EHCI root HUB> at usbus1
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <ATI OHCI root HUB> at usbus0
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <SATA SSD S9FM02.0> ACS-3 ATA SATA 3.x device
ada0: Serial Number DE35075218EE01540638
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 15272MB (31277232 512 byte sectors)
Trying to mount root from ufs:/dev/ada0p2 [rw]...
uhub2: 2 ports with 2 removable, self powered
uhub0: 4 ports with 4 removable, self powered
uhub4: 5 ports with 5 removable, self powered
uhub6: 5 ports with 5 removable, self powered
/etc/rc: WARNING: hostid: unable to figure out a UUID from DMI data, generating a new one
uhub1: 4 ports with 4 removable, self powered
uhub5: 5 ports with 5 removable, self powered
uhub3: 5 ports with 5 removable, self powered
Setting hostuuid: 1b7649f9-3314-11e8-8c30-000db93f7380.
Setting hostid: 0xe10f5a11.
Starting file system checks:
/dev/ada0p2: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0p2: clean, 2797817 free (1057 frags, 349595 blocks, 0.0% fragmentation)
Mounting local filesystems:.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
32-bit compatibility ldconfig path: /usr/lib32
ugen6.2: <Generic Flash Card Reader/Writer> at usbus6
umass0 on uhub1
umass0: <Generic Flash Card Reader/Writer, class 0/0, rev 2.01/1.00, addr 2> on usbus6
umass0:  SCSI over Bulk-Only; quirks = 0x4001
umass0:6:0: Attached to scbus6
Setting hostname: clt-dsk-t-andreas-bsd.
da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
da0: <Multiple Card  Reader 1.00> Removable Direct Access SPC-2 SCSI device
da0: Serial Number 058F63666485
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: .
lo0: link state changed to UP
Starting Network: lo0 re0 re1 re2.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 ::1 prefixlen 128
re0: link state changed to DOWN
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
        inet 127.0.0.1 netmask 0xff000000re1: link state changed to DOWN

        groups: lo
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
re0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metricre2: link state changed to DOWN
 0 mtu 1500
        options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
        ether 00:0d:b9:3f:73:80
        media: Ethernet autoselect (10baseT/UTP <half-duplex>)
        status: no carrier
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
re1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
        ether 00:0d:b9:3f:73:81
        media: Ethernet autoselect (10baseT/UTP <half-duplex>)
        status: no carrier
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
        ether 00:0d:b9:3f:73:82
        media: Ethernet autoselect (10baseT/UTP <half-duplex>)
        status: no carrier
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting devd.
Starting Network: re0.
re0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
        ether 00:0d:b9:3f:73:80
        media: Ethernet autoselect (10baseT/UTP <half-duplex>)
        status: no carrier
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting Network: re1.
re1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
        ether 00:0d:b9:3f:73:81
        media: Ethernet autoselect (10baseT/UTP <half-duplex>)
        status: no carrier
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting Network: re2.
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
        ether 00:0d:b9:3f:73:82
        media: Ethernet autoselect (10baseT/UTP <half-duplex>)
        status: no carrier
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Autoloading module: intpm.ko
intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
add host 127.0.0.1: gateway lo0 fib 0: route already in table
add host ::1: gateway lo0 fib 0: route already in table
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Generating host.conf.
Creating and/or trimming log files.
Starting syslogd.
No core dumps found.
Clearing /tmp (X related).
Updating motd:.
Mounting late filesystems:.
Configuring vt: keymap blanktime.
Performing sanity check on sshd configuration.
Starting sshd.
Starting cron.
Starting background file system checks in 60 seconds.

Thu Mar 29 07:43
FreeBSD/amd64 (clt-dsk-t-andreas-bsd) (ttyu0)

login:

# shutdown -h now
Shutdown NOW!
shutdown: [pid 1001]
Waiting for PIDS: 933.
Stopping sshd.
Waiting for PIDS: 929.
Stopping devd.
Waiting for PIDS: 657.
Writing entropy file:.
Writing early boot entropy file:.
.
Terminated
Mar 29 07:45:01 clt-dsk-t-andreas-bsd syslogd: exiting on signal 15
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 0 0 done
Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done
All buffers synced.
Uptime: 1m39s
umass0: detached
ugen5.2: <Generic Flash Card Reader/Writer> at usbus5
umass0 on uhub0
umass0: <Generic Flash Card Reader/Writer, class 0/0, rev 2.00/1.00, addr 2> on usbus5
umass0:  SCSI over Bulk-Only; quirks = 0x4001
umass0:6:0: Attached to scbus6
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain
umass0: detached

The operating system has halted.
Please press any key to reboot.

### CONSOLE ####################################################################
keymap="ch.kbd"

# Set dumpdev to "AUTO" to enable crash dumps, "NO" to disable
dumpdev="AUTO"

### NETWORK ####################################################################
hostname="andreas-bsd"
gateway_enable="YES"

ifconfig_re0="WPA DHCP"
ifconfig_re2="inet 192.168.0.1 netmask 255.255.255.0" 

### FIREWALL ###################################################################
pf_enable="YES"
pf_rules="/etc/pf.conf"
pf_flags=""
pflog_enable="YES"
pflog_logfile="/var/log/pf.log"
pflog_flags=""


### DAEMONS ####################################################################
sendmail_enable="NONE"
sshd_enable="YES"

### DHCP SERVER ################################################################
dhcpd_enable="YES"
dhcpd_flags="-q"
dhcpd_conf="/usr/local/etc/dhcpd.conf"
dhcpd_ifaces="re2"
dhcpd_withumask="022"

dhcpd_chuser_enable="YES"
dhcpd_withuser="dhcpd"
dhcpd_withgroup="dhcpd"
dhcpd_chroot_enable="YES"
dhcpd_devfs_enable="YES"
dhcpd_rootdir="/var/db/dhcpd"

network={
    key_mgmt=IEEE8021X
    identity="<USERNAME>"
    password="<PASSWORD>"
    eap=PEAP
    eapol_flags=0
    phase1="peaplabel=0"
    phase2="auth=MSCHAPV2"
}

vfs.mountroot.timeout="10"
kernels_autodetect="NO"
comconsole_speed="115200"
console="comconsole"

PuTTY on Linux: Clipboard Issue (Copy/Paste)

Leave a reply

support for CLIPBOARD selection
4.11.4 Assigning copy and paste actions to clipboards

$ dpkg-query -L putty
/.
/usr
/usr/bin
/usr/bin/pageant
/usr/bin/putty
/usr/share
/usr/share/applications
/usr/share/applications/putty.desktop
/usr/share/doc
/usr/share/doc/putty
/usr/share/doc/putty/copyright
/usr/share/man
/usr/share/man/man1
/usr/share/man/man1/pageant.1.gz
/usr/share/man/man1/putty.1.gz
/usr/share/menu
/usr/share/menu/putty
/usr/share/pixmaps
/usr/share/pixmaps/putty.png
/usr/share/pixmaps/putty.xpm
/usr/share/doc/putty/changelog.Debian.gz

$ sudo apt-get install build-essential
$ sudo apt-get install coreutils
$ sudo apt-get install autoconf automake groff libtool

$ ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for ranlib... ranlib
checking for style of include used by make... GNU
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking for ar... ar
checking the archiver (ar) interface... ar
checking for gcc option to accept ISO C99... none needed
checking for utmpx.h... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.16... yes
checking for GTK+ - version >= 3.0.0... Package gtk+-3.0 was not found in the pkg-config search path.
Perhaps you should add the directory containing `gtk+-3.0.pc'
to the PKG_CONFIG_PATH environment variable
No package 'gtk+-3.0' found
no
*** Could not run GTK+ test program, checking why...
*** The test program failed to compile or link. See the file config.log for the
*** exact error that occurred. This usually means GTK+ is incorrectly installed.
checking for pkg-config... (cached) /usr/bin/pkg-config
checking pkg-config is at least version 0.7... yes
checking for GTK+ - version >= 2.0.0... Package gtk+-2.0 was not found in the pkg-config search path.
Perhaps you should add the directory containing `gtk+-2.0.pc'
to the PKG_CONFIG_PATH environment variable
No package 'gtk+-2.0' found
no
*** Could not run GTK+ test program, checking why...
*** The test program failed to compile or link. See the file config.log for the
*** exact error that occured. This usually means GTK+ is incorrectly installed.
checking for gtk-config... absent
checking for library containing socket... none required
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for library containing dlopen... -ldl
checking for XOpenDisplay in -lX11... no
checking for getaddrinfo... yes
checking for posix_openpt... yes
checking for ptsname... yes
checking for setresuid... yes
checking for strsignal... yes
checking for updwtmpx... yes
checking for fstatat... yes
checking for dirfd... yes
checking whether CLOCK_MONOTONIC is declared... yes
checking for library containing clock_gettime... none required
checking for SO_PEERCRED and dependencies... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating uxconfig.h
config.status: executing depfiles commands

'configure' was unable to find any version of the GTK libraries on
your system. Therefore, PuTTY itself and the other GUI utilities will
not be built by the generated Makefile: only the command-line tools
such as puttygen, plink and psftp will be built.

$ sudo apt-get install libgtk-3-dev

$ ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $ dpkg-query -L putty
/.
/usr
/usr/bin
/usr/bin/pageant
/usr/bin/putty
/usr/share
/usr/share/applications
/usr/share/applications/putty.desktop
/usr/share/doc
/usr/share/doc/putty
/usr/share/doc/putty/copyright
/usr/share/man
/usr/share/man/man1
/usr/share/man/man1/pageant.1.gz
/usr/share/man/man1/putty.1.gz
/usr/share/menu
/usr/share/menu/putty
/usr/share/pixmaps
/usr/share/pixmaps/putty.png
/usr/share/pixmaps/putty.xpm
/usr/share/doc/putty/changelog.Debian.gz
$(MAKE)... yes
checking whether make supports nested variables... yes
checking for ranlib... ranlib
checking for style of include used by make... GNU
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking for ar... ar
checking the archiver (ar) interface... ar
checking for gcc option to accept ISO C99... none needed
checking for utmpx.h... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.16... yes
checking for GTK+ - version >= 3.0.0... yes (version 3.22.30)
checking for pango_font_family_is_monospace... yes
checking for pango_font_map_list_families... yes
checking for library containing socket... none required
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for library containing dlopen... -ldl
checking for XOpenDisplay in -lX11... yes
checking for getaddrinfo... yes
checking for posix_openpt... yes
checking for ptsname... yes
checking for setresuid... yes
checking for strsignal... yes
checking for updwtmpx... yes
checking for fstatat... yes
checking for dirfd... yes
checking whether CLOCK_MONOTONIC is declared... yes
checking for library containing clock_gettime... none required
checking for SO_PEERCRED and dependencies... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating uxconfig.h
config.status: executing depfiles commands

$ make
make all-am
[...]
make[1]: Leaving directory '/home/andreas/Downloads/putty-0.71'

$ ./putty

Linux Find all Serial Ports (ttyS, ttyUSB, …)

Leave a reply

How To Check and Use Serial Ports Under Linux
How to find which serial port is in use?
How to find all serial devices (ttyS, ttyUSB, ..) on Linux without opening them?

$ dmesg | grep ttyS
[    0.686269] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.687681] ttyS4: detected caps 00000700 should be 00000500
[    0.687695] 0000:01:00.0: ttyS4 at MMIO 0xf7c01000 (irq = 16, base_baud = 4000000) is a 16C950/954
[    0.687800] ttyS5: detected caps 00000700 should be 00000500
[    0.687813] 0000:01:00.0: ttyS5 at MMIO 0xf7c01200 (irq = 16, base_baud = 4000000) is a 16C950/954

$ ll /sys/class/tty/*/device/driver | grep -v bus/platform
lrwxrwxrwx 1 root root 0 Mar 31 11:43 /sys/class/tty/ttyS0/device/driver -> ../../../bus/pnp/drivers/serial/
lrwxrwxrwx 1 root root 0 Mar 31 11:43 /sys/class/tty/ttyS4/device/driver -> ../../../../bus/pci/drivers/serial/
lrwxrwxrwx 1 root root 0 Mar 31 11:43 /sys/class/tty/ttyS5/device/driver -> ../../../../bus/pci/drivers/serial/

$ sudo apt install setserial
$ sudo setserial -g /dev/ttyS[0123456789]
/dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4
/dev/ttyS1, UART: unknown, Port: 0x02f8, IRQ: 3
/dev/ttyS2, UART: unknown, Port: 0x03e8, IRQ: 4
/dev/ttyS3, UART: unknown, Port: 0x02e8, IRQ: 3
/dev/ttyS4, UART: 16950/954, Port: 0x0000, IRQ: 16
/dev/ttyS5, UART: 16950/954, Port: 0x0000, IRQ: 16
/dev/ttyS6, UART: unknown, Port: 0x0000, IRQ: 0

$ sudo cat /proc/tty/driver/serial
serinfo:1.0 driver revision:
0: uart:16550A port:000003F8 irq:4 tx:0 rx:0
1: uart:unknown port:000002F8 irq:3
2: uart:unknown port:000003E8 irq:4
3: uart:unknown port:000002E8 irq:3
4: uart:16C950/954 mmio:0xF7C01000 irq:16 tx:30 rx:0
5: uart:16C950/954 mmio:0xF7C01200 irq:16 tx:30 rx:0

Windows 10 Release Info / Versionen

Leave a reply

Windows 10 release information

ESP-IDF Logging

Leave a reply

Logging library
Logging to Host (via JTAG)

I (352) boot: Loaded app from partition at offset 0x10000
I (352) boot: Disabling RNG early entropy source...
W (101187) BT_RFCOMM: port_rfc_closed RFCOMM connection in state 2 closed: Closed (res: 19)
W (101227) BT_RFCOMM: rfc_find_lcid_mcb LCID reused LCID:0x42 current:0x0
W (101227) BT_RFCOMM: RFCOMM_DisconnectInd LCID:0x42
^     ^      ^
|     |      |
|     |     Tag
| Timestamp
Letter (E = Error, W = Warning, D = Debug, V = Verbose, I = Information)

#define LOG_FORMAT(letter, format)  LOG_COLOR_ ## letter #letter " (%d) %s: " format LOG_RESET_COLOR "\n"

esp_log_write(ESP_LOG_ERROR,      tag, LOG_FORMAT(E, format), esp_log_timestamp(), tag, ##__VA_ARGS__);

/**
 * @brief Function which returns timestamp to be used in log output
 *
 * This function is used in expansion of ESP_LOGx macros.
 * In the 2nd stage bootloader, and at early application startup stage
 * this function uses CPU cycle counter as time source. Later when
 * FreeRTOS scheduler start running, it switches to FreeRTOS tick count.
 *
 * For now, we ignore millisecond counter overflow.
 *
 * @return timestamp, in milliseconds
 */
uint32_t esp_log_timestamp(void);

ESP32: ESP-IDF JTAG Debugging

Leave a reply

API Guides » JTAG Debugging

JTAG Debugging for ESP32 (with Segger J-Link)
VSCode JTAG Debugging of ESP32 – Part 1

[  208.808349] usb 1-2: new high-speed USB device number 8 using xhci_hcd
[  208.958295] usb 1-2: New USB device found, idVendor=14cd, idProduct=8601
[  208.958312] usb 1-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[  208.958322] usb 1-2: Product: USB 2.0 Hub            
[  208.958333] usb 1-2: Manufacturer: USB Device  
[  208.961206] hub 1-2:1.0: USB hub found
[  208.961433] hub 1-2:1.0: 4 ports detected
[  209.248389] usb 1-2.1: new high-speed USB device number 9 using xhci_hcd
[  209.357765] usb 1-2.1: New USB device found, idVendor=0403, idProduct=8a98
[  209.357781] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  209.357794] usb 1-2.1: Product: TIAO USB Multi-Protocol Adapter
[  209.357804] usb 1-2.1: Manufacturer: TIAO
[  209.357814] usb 1-2.1: SerialNumber: TIM01936
[  209.448377] usb 1-2.2: new full-speed USB device number 10 using xhci_hcd
[  209.560734] usb 1-2.2: New USB device found, idVendor=0403, idProduct=6001
[  209.560750] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  209.560762] usb 1-2.2: Product: FT232R USB UART
[  209.560772] usb 1-2.2: Manufacturer: FTDI
[  209.560781] usb 1-2.2: SerialNumber: A50285BI
[  209.644372] usb 1-2.3: new full-speed USB device number 11 using xhci_hcd
[  209.751128] usb 1-2.3: New USB device found, idVendor=10c4, idProduct=ea60
[  209.751140] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  209.751150] usb 1-2.3: Product: CP2104 USB to UART Bridge Controller
[  209.751158] usb 1-2.3: Manufacturer: Silicon Labs
[  209.751165] usb 1-2.3: SerialNumber: 01496CAC
[  209.823116] usbcore: registered new interface driver usbserial_generic
[  209.823186] usbserial: USB Serial support registered for generic
[  209.833881] usbcore: registered new interface driver ftdi_sio
[  209.834081] usbserial: USB Serial support registered for FTDI USB Serial Device
[  209.834431] usb 1-2.1: Ignoring serial port reserved for JTAG
[  209.834490] ftdi_sio 1-2.1:1.1: FTDI USB Serial Device converter detected
[  209.834691] usb 1-2.1: Detected FT2232H
[  209.836784] usbcore: registered new interface driver cp210x
[  209.837796] usbserial: USB Serial support registered for cp210x
[  209.838863] cp210x 1-2.3:1.0: cp210x converter detected
[  209.839442] usb 1-2.1: FTDI USB Serial Device converter now attached to ttyUSB0
[  209.839561] ftdi_sio 1-2.2:1.0: FTDI USB Serial Device converter detected
[  209.839620] usb 1-2.2: Detected FT232RL
[  209.839953] usb 1-2.2: FTDI USB Serial Device converter now attached to ttyUSB1
[  209.843666] usb 1-2.3: cp210x converter now attached to ttyUSB2

ESP-IDF Bluetooth

Leave a reply

Bluetooth Basics
Bluetooth profile

github.com/espressif/arduino-esp32/tree/master/libraries/BluetoothSerial/src

API Reference » Bluetooth API
API Reference » System API » Logging library
API Reference » System API » Event Loop Library
API Reference » System API » Interrupt allocation
API Reference » Networking APIs » TCP/IP Adapter
API Reference » Networking APIs » Ethernet
API Reference » Error Codes Reference
API Reference » Configuration Options

API Guides » JTAG Debugging

Class of Device/Service = CoD

Bluetooth CoD: Bluetooth Class of Device/Class of Service Explained
The Class of Device/Service field
Bluetooth Class of Device/Service (CoD) Generator

TIAO USB Multi Protocol Adapter (TUMPA)

2 Replies

TIAO USB MULTI-PROTOCOL ADAPTER (JTAG, SPI, I2C, SERIAL)
TIAO USB Multi Protocol Adapter User’s Manual
PlatformIO – TIAO USB Multi-Protocol Adapter (TUMPA)

This TIAO USB Multi-Protocol adapter is powered by FTDI’s flagship communication chip FT2232H.
It supports the following protocols: JTAG, SPI, I2C and serial.

Openocd
brjtag
Urjtag
FlashRom
jtag pro
zJTAG – Windows console JTAG application to debrick wireless routers
XC3SPROG – Windows / Linux console application to program CPLD/FPGA

[  709.268815] usb 1-2: new high-speed USB device number 6 using xhci_hcd
[  709.423656] usb 1-2: New USB device found, idVendor=0403, idProduct=8a98
[  709.423673] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  709.423685] usb 1-2: Product: TIAO USB Multi-Protocol Adapter
[  709.423696] usb 1-2: Manufacturer: TIAO
[  709.423705] usb 1-2: SerialNumber: TIM01936
[  709.518651] usbcore: registered new interface driver usbserial_generic
[  709.518754] usbserial: USB Serial support registered for generic
[  709.529409] usbcore: registered new interface driver ftdi_sio
[  709.529447] usbserial: USB Serial support registered for FTDI USB Serial Device
[  709.529647] usb 1-2: Ignoring serial port reserved for JTAG
[  709.529705] ftdi_sio 1-2:1.1: FTDI USB Serial Device converter detected
[  709.529829] usb 1-2: Detected FT2232H
[  709.530222] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB0

ESP-IDF: SPP Acceptor sdkconfig

Leave a reply

#
# Automatically generated file; DO NOT EDIT.
# Espressif IoT Development Framework Configuration
#
CONFIG_IDF_TARGET="esp32"

#
# SDK tool configuration
#
CONFIG_TOOLPREFIX="xtensa-esp32-elf-"
CONFIG_PYTHON="python"
CONFIG_MAKE_WARN_UNDEFINED_VARIABLES=y

#
# Application manager
#
CONFIG_APP_COMPILE_TIME_DATE=y
CONFIG_APP_EXCLUDE_PROJECT_VER_VAR=
CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR=

#
# Bootloader config
#
CONFIG_LOG_BOOTLOADER_LEVEL_NONE=
CONFIG_LOG_BOOTLOADER_LEVEL_ERROR=
CONFIG_LOG_BOOTLOADER_LEVEL_WARN=
CONFIG_LOG_BOOTLOADER_LEVEL_INFO=y
CONFIG_LOG_BOOTLOADER_LEVEL_DEBUG=
CONFIG_LOG_BOOTLOADER_LEVEL_VERBOSE=
CONFIG_LOG_BOOTLOADER_LEVEL=3
CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_8V=
CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V=y
CONFIG_BOOTLOADER_FACTORY_RESET=
CONFIG_BOOTLOADER_APP_TEST=
CONFIG_BOOTLOADER_WDT_ENABLE=y
CONFIG_BOOTLOADER_WDT_DISABLE_IN_USER_CODE=
CONFIG_BOOTLOADER_WDT_TIME_MS=9000
CONFIG_APP_ROLLBACK_ENABLE=

#
# Security features
#
CONFIG_SECURE_SIGNED_APPS_NO_SECURE_BOOT=
CONFIG_SECURE_BOOT_ENABLED=
CONFIG_FLASH_ENCRYPTION_ENABLED=

#
# Serial flasher config
#
CONFIG_ESPTOOLPY_PORT="/dev/ttyUSB0"
CONFIG_ESPTOOLPY_BAUD_115200B=y
CONFIG_ESPTOOLPY_BAUD_230400B=
CONFIG_ESPTOOLPY_BAUD_921600B=
CONFIG_ESPTOOLPY_BAUD_2MB=
CONFIG_ESPTOOLPY_BAUD_OTHER=
CONFIG_ESPTOOLPY_BAUD_OTHER_VAL=115200
CONFIG_ESPTOOLPY_BAUD=115200
CONFIG_ESPTOOLPY_COMPRESSED=y
CONFIG_FLASHMODE_QIO=
CONFIG_FLASHMODE_QOUT=
CONFIG_FLASHMODE_DIO=y
CONFIG_FLASHMODE_DOUT=
CONFIG_ESPTOOLPY_FLASHMODE="dio"
CONFIG_ESPTOOLPY_FLASHFREQ_80M=
CONFIG_ESPTOOLPY_FLASHFREQ_40M=y
CONFIG_ESPTOOLPY_FLASHFREQ_26M=
CONFIG_ESPTOOLPY_FLASHFREQ_20M=
CONFIG_ESPTOOLPY_FLASHFREQ="40m"
CONFIG_ESPTOOLPY_FLASHSIZE_1MB=
CONFIG_ESPTOOLPY_FLASHSIZE_2MB=y
CONFIG_ESPTOOLPY_FLASHSIZE_4MB=
CONFIG_ESPTOOLPY_FLASHSIZE_8MB=
CONFIG_ESPTOOLPY_FLASHSIZE_16MB=
CONFIG_ESPTOOLPY_FLASHSIZE="2MB"
CONFIG_ESPTOOLPY_FLASHSIZE_DETECT=y
CONFIG_ESPTOOLPY_BEFORE_RESET=y
CONFIG_ESPTOOLPY_BEFORE_NORESET=
CONFIG_ESPTOOLPY_BEFORE="default_reset"
CONFIG_ESPTOOLPY_AFTER_RESET=y
CONFIG_ESPTOOLPY_AFTER_NORESET=
CONFIG_ESPTOOLPY_AFTER="hard_reset"
CONFIG_MONITOR_BAUD_9600B=
CONFIG_MONITOR_BAUD_57600B=
CONFIG_MONITOR_BAUD_115200B=y
CONFIG_MONITOR_BAUD_230400B=
CONFIG_MONITOR_BAUD_921600B=
CONFIG_MONITOR_BAUD_2MB=
CONFIG_MONITOR_BAUD_OTHER=
CONFIG_MONITOR_BAUD_OTHER_VAL=115200
CONFIG_MONITOR_BAUD=115200

#
# Partition Table
#
CONFIG_PARTITION_TABLE_SINGLE_APP=y
CONFIG_PARTITION_TABLE_TWO_OTA=
CONFIG_PARTITION_TABLE_CUSTOM=
CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
CONFIG_PARTITION_TABLE_FILENAME="partitions_singleapp.csv"
CONFIG_PARTITION_TABLE_OFFSET=0x8000
CONFIG_PARTITION_TABLE_MD5=y

#
# Compiler options
#
CONFIG_OPTIMIZATION_LEVEL_DEBUG=y
CONFIG_OPTIMIZATION_LEVEL_RELEASE=
CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED=y
CONFIG_OPTIMIZATION_ASSERTIONS_SILENT=
CONFIG_OPTIMIZATION_ASSERTIONS_DISABLED=
CONFIG_CXX_EXCEPTIONS=
CONFIG_STACK_CHECK_NONE=y
CONFIG_STACK_CHECK_NORM=
CONFIG_STACK_CHECK_STRONG=
CONFIG_STACK_CHECK_ALL=
CONFIG_STACK_CHECK=
CONFIG_WARN_WRITE_STRINGS=
CONFIG_DISABLE_GCC8_WARNINGS=

#
# Component config
#

#
# Application Level Tracing
#
CONFIG_ESP32_APPTRACE_DEST_TRAX=
CONFIG_ESP32_APPTRACE_DEST_NONE=y
CONFIG_ESP32_APPTRACE_ENABLE=
CONFIG_ESP32_APPTRACE_LOCK_ENABLE=y
CONFIG_AWS_IOT_SDK=

#
# Bluetooth
#
CONFIG_BT_ENABLED=y

#
# Bluetooth controller
#
CONFIG_BTDM_CONTROLLER_MODE_BLE_ONLY=
CONFIG_BTDM_CONTROLLER_MODE_BR_EDR_ONLY=y
CONFIG_BTDM_CONTROLLER_MODE_BTDM=
CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_ACL_CONN=2
CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_SYNC_CONN=0
CONFIG_BTDM_CONTROLLER_BLE_MAX_CONN_EFF=0
CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_ACL_CONN_EFF=2
CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_SYNC_CONN_EFF=0
CONFIG_BTDM_CONTROLLER_PINNED_TO_CORE_0=y
CONFIG_BTDM_CONTROLLER_PINNED_TO_CORE_1=
CONFIG_BTDM_CONTROLLER_PINNED_TO_CORE=0
CONFIG_BTDM_CONTROLLER_HCI_MODE_VHCI=y
CONFIG_BTDM_CONTROLLER_HCI_MODE_UART_H4=

#
# MODEM SLEEP Options
#
CONFIG_BTDM_CONTROLLER_MODEM_SLEEP=y
CONFIG_BTDM_MODEM_SLEEP_MODE_ORIG=y
CONFIG_BTDM_MODEM_SLEEP_MODE_EVED=
CONFIG_BTDM_LPCLK_SEL_MAIN_XTAL=y
CONFIG_BLUEDROID_ENABLED=y
CONFIG_BLUEDROID_PINNED_TO_CORE_0=y
CONFIG_BLUEDROID_PINNED_TO_CORE_1=
CONFIG_BLUEDROID_PINNED_TO_CORE=0
CONFIG_BTC_TASK_STACK_SIZE=3072
CONFIG_BTU_TASK_STACK_SIZE=4096
CONFIG_BLUEDROID_MEM_DEBUG=
CONFIG_CLASSIC_BT_ENABLED=y
CONFIG_A2DP_ENABLE=
CONFIG_BT_SPP_ENABLED=y
CONFIG_HFP_ENABLE=
CONFIG_BT_SSP_ENABLED=y
CONFIG_BT_STACK_NO_LOG=

#
# BT DEBUG LOG LEVEL
#
CONFIG_HCI_TRACE_LEVEL_NONE=
CONFIG_HCI_TRACE_LEVEL_ERROR=
CONFIG_HCI_TRACE_LEVEL_WARNING=y
CONFIG_HCI_TRACE_LEVEL_API=
CONFIG_HCI_TRACE_LEVEL_EVENT=
CONFIG_HCI_TRACE_LEVEL_DEBUG=
CONFIG_HCI_TRACE_LEVEL_VERBOSE=
CONFIG_HCI_INITIAL_TRACE_LEVEL=2
CONFIG_BTM_TRACE_LEVEL_NONE=
CONFIG_BTM_TRACE_LEVEL_ERROR=
CONFIG_BTM_TRACE_LEVEL_WARNING=y
CONFIG_BTM_TRACE_LEVEL_API=
CONFIG_BTM_TRACE_LEVEL_EVENT=
CONFIG_BTM_TRACE_LEVEL_DEBUG=
CONFIG_BTM_TRACE_LEVEL_VERBOSE=
CONFIG_BTM_INITIAL_TRACE_LEVEL=2
CONFIG_L2CAP_TRACE_LEVEL_NONE=
CONFIG_L2CAP_TRACE_LEVEL_ERROR=
CONFIG_L2CAP_TRACE_LEVEL_WARNING=y
CONFIG_L2CAP_TRACE_LEVEL_API=
CONFIG_L2CAP_TRACE_LEVEL_EVENT=
CONFIG_L2CAP_TRACE_LEVEL_DEBUG=
CONFIG_L2CAP_TRACE_LEVEL_VERBOSE=
CONFIG_L2CAP_INITIAL_TRACE_LEVEL=2
CONFIG_RFCOMM_TRACE_LEVEL_NONE=
CONFIG_RFCOMM_TRACE_LEVEL_ERROR=
CONFIG_RFCOMM_TRACE_LEVEL_WARNING=y
CONFIG_RFCOMM_TRACE_LEVEL_API=
CONFIG_RFCOMM_TRACE_LEVEL_EVENT=
CONFIG_RFCOMM_TRACE_LEVEL_DEBUG=
CONFIG_RFCOMM_TRACE_LEVEL_VERBOSE=
CONFIG_RFCOMM_INITIAL_TRACE_LEVEL=2
CONFIG_SDP_TRACE_LEVEL_NONE=
CONFIG_SDP_TRACE_LEVEL_ERROR=
CONFIG_SDP_TRACE_LEVEL_WARNING=y
CONFIG_SDP_TRACE_LEVEL_API=
CONFIG_SDP_TRACE_LEVEL_EVENT=
CONFIG_SDP_TRACE_LEVEL_DEBUG=
CONFIG_SDP_TRACE_LEVEL_VERBOSE=
CONFIG_SDP_INITIAL_TRACE_LEVEL=2
CONFIG_GAP_TRACE_LEVEL_NONE=
CONFIG_GAP_TRACE_LEVEL_ERROR=
CONFIG_GAP_TRACE_LEVEL_WARNING=y
CONFIG_GAP_TRACE_LEVEL_API=
CONFIG_GAP_TRACE_LEVEL_EVENT=
CONFIG_GAP_TRACE_LEVEL_DEBUG=
CONFIG_GAP_TRACE_LEVEL_VERBOSE=
CONFIG_GAP_INITIAL_TRACE_LEVEL=2
CONFIG_BNEP_TRACE_LEVEL_NONE=
CONFIG_BNEP_TRACE_LEVEL_ERROR=
CONFIG_BNEP_TRACE_LEVEL_WARNING=y
CONFIG_BNEP_TRACE_LEVEL_API=
CONFIG_BNEP_TRACE_LEVEL_EVENT=
CONFIG_BNEP_TRACE_LEVEL_DEBUG=
CONFIG_BNEP_TRACE_LEVEL_VERBOSE=
CONFIG_BNEP_INITIAL_TRACE_LEVEL=2
CONFIG_PAN_TRACE_LEVEL_NONE=
CONFIG_PAN_TRACE_LEVEL_ERROR=
CONFIG_PAN_TRACE_LEVEL_WARNING=y
CONFIG_PAN_TRACE_LEVEL_API=
CONFIG_PAN_TRACE_LEVEL_EVENT=
CONFIG_PAN_TRACE_LEVEL_DEBUG=
CONFIG_PAN_TRACE_LEVEL_VERBOSE=
CONFIG_PAN_INITIAL_TRACE_LEVEL=2
CONFIG_A2D_TRACE_LEVEL_NONE=
CONFIG_A2D_TRACE_LEVEL_ERROR=
CONFIG_A2D_TRACE_LEVEL_WARNING=y
CONFIG_A2D_TRACE_LEVEL_API=
CONFIG_A2D_TRACE_LEVEL_EVENT=
CONFIG_A2D_TRACE_LEVEL_DEBUG=
CONFIG_A2D_TRACE_LEVEL_VERBOSE=
CONFIG_A2D_INITIAL_TRACE_LEVEL=2
CONFIG_AVDT_TRACE_LEVEL_NONE=
CONFIG_AVDT_TRACE_LEVEL_ERROR=
CONFIG_AVDT_TRACE_LEVEL_WARNING=y
CONFIG_AVDT_TRACE_LEVEL_API=
CONFIG_AVDT_TRACE_LEVEL_EVENT=
CONFIG_AVDT_TRACE_LEVEL_DEBUG=
CONFIG_AVDT_TRACE_LEVEL_VERBOSE=
CONFIG_AVDT_INITIAL_TRACE_LEVEL=2
CONFIG_AVCT_TRACE_LEVEL_NONE=
CONFIG_AVCT_TRACE_LEVEL_ERROR=
CONFIG_AVCT_TRACE_LEVEL_WARNING=y
CONFIG_AVCT_TRACE_LEVEL_API=
CONFIG_AVCT_TRACE_LEVEL_EVENT=
CONFIG_AVCT_TRACE_LEVEL_DEBUG=
CONFIG_AVCT_TRACE_LEVEL_VERBOSE=
CONFIG_AVCT_INITIAL_TRACE_LEVEL=2
CONFIG_AVRC_TRACE_LEVEL_NONE=
CONFIG_AVRC_TRACE_LEVEL_ERROR=
CONFIG_AVRC_TRACE_LEVEL_WARNING=y
CONFIG_AVRC_TRACE_LEVEL_API=
CONFIG_AVRC_TRACE_LEVEL_EVENT=
CONFIG_AVRC_TRACE_LEVEL_DEBUG=
CONFIG_AVRC_TRACE_LEVEL_VERBOSE=
CONFIG_AVRC_INITIAL_TRACE_LEVEL=2
CONFIG_MCA_TRACE_LEVEL_NONE=
CONFIG_MCA_TRACE_LEVEL_ERROR=
CONFIG_MCA_TRACE_LEVEL_WARNING=y
CONFIG_MCA_TRACE_LEVEL_API=
CONFIG_MCA_TRACE_LEVEL_EVENT=
CONFIG_MCA_TRACE_LEVEL_DEBUG=
CONFIG_MCA_TRACE_LEVEL_VERBOSE=
CONFIG_MCA_INITIAL_TRACE_LEVEL=2
CONFIG_HID_TRACE_LEVEL_NONE=
CONFIG_HID_TRACE_LEVEL_ERROR=
CONFIG_HID_TRACE_LEVEL_WARNING=y
CONFIG_HID_TRACE_LEVEL_API=
CONFIG_HID_TRACE_LEVEL_EVENT=
CONFIG_HID_TRACE_LEVEL_DEBUG=
CONFIG_HID_TRACE_LEVEL_VERBOSE=
CONFIG_HID_INITIAL_TRACE_LEVEL=2
CONFIG_APPL_TRACE_LEVEL_NONE=
CONFIG_APPL_TRACE_LEVEL_ERROR=
CONFIG_APPL_TRACE_LEVEL_WARNING=y
CONFIG_APPL_TRACE_LEVEL_API=
CONFIG_APPL_TRACE_LEVEL_EVENT=
CONFIG_APPL_TRACE_LEVEL_DEBUG=
CONFIG_APPL_TRACE_LEVEL_VERBOSE=
CONFIG_APPL_INITIAL_TRACE_LEVEL=2
CONFIG_GATT_TRACE_LEVEL_NONE=
CONFIG_GATT_TRACE_LEVEL_ERROR=
CONFIG_GATT_TRACE_LEVEL_WARNING=y
CONFIG_GATT_TRACE_LEVEL_API=
CONFIG_GATT_TRACE_LEVEL_EVENT=
CONFIG_GATT_TRACE_LEVEL_DEBUG=
CONFIG_GATT_TRACE_LEVEL_VERBOSE=
CONFIG_GATT_INITIAL_TRACE_LEVEL=2
CONFIG_SMP_TRACE_LEVEL_NONE=
CONFIG_SMP_TRACE_LEVEL_ERROR=
CONFIG_SMP_TRACE_LEVEL_WARNING=y
CONFIG_SMP_TRACE_LEVEL_API=
CONFIG_SMP_TRACE_LEVEL_EVENT=
CONFIG_SMP_TRACE_LEVEL_DEBUG=
CONFIG_SMP_TRACE_LEVEL_VERBOSE=
CONFIG_SMP_INITIAL_TRACE_LEVEL=2
CONFIG_BTIF_TRACE_LEVEL_NONE=
CONFIG_BTIF_TRACE_LEVEL_ERROR=
CONFIG_BTIF_TRACE_LEVEL_WARNING=y
CONFIG_BTIF_TRACE_LEVEL_API=
CONFIG_BTIF_TRACE_LEVEL_EVENT=
CONFIG_BTIF_TRACE_LEVEL_DEBUG=
CONFIG_BTIF_TRACE_LEVEL_VERBOSE=
CONFIG_BTIF_INITIAL_TRACE_LEVEL=2
CONFIG_BTC_TRACE_LEVEL_NONE=
CONFIG_BTC_TRACE_LEVEL_ERROR=
CONFIG_BTC_TRACE_LEVEL_WARNING=y
CONFIG_BTC_TRACE_LEVEL_API=
CONFIG_BTC_TRACE_LEVEL_EVENT=
CONFIG_BTC_TRACE_LEVEL_DEBUG=
CONFIG_BTC_TRACE_LEVEL_VERBOSE=
CONFIG_BTC_INITIAL_TRACE_LEVEL=2
CONFIG_OSI_TRACE_LEVEL_NONE=
CONFIG_OSI_TRACE_LEVEL_ERROR=
CONFIG_OSI_TRACE_LEVEL_WARNING=y
CONFIG_OSI_TRACE_LEVEL_API=
CONFIG_OSI_TRACE_LEVEL_EVENT=
CONFIG_OSI_TRACE_LEVEL_DEBUG=
CONFIG_OSI_TRACE_LEVEL_VERBOSE=
CONFIG_OSI_INITIAL_TRACE_LEVEL=2
CONFIG_BLUFI_TRACE_LEVEL_NONE=
CONFIG_BLUFI_TRACE_LEVEL_ERROR=
CONFIG_BLUFI_TRACE_LEVEL_WARNING=y
CONFIG_BLUFI_TRACE_LEVEL_API=
CONFIG_BLUFI_TRACE_LEVEL_EVENT=
CONFIG_BLUFI_TRACE_LEVEL_DEBUG=
CONFIG_BLUFI_TRACE_LEVEL_VERBOSE=
CONFIG_BLUFI_INITIAL_TRACE_LEVEL=2
CONFIG_BT_ACL_CONNECTIONS=4
CONFIG_BT_ALLOCATION_FROM_SPIRAM_FIRST=
CONFIG_BT_BLE_DYNAMIC_ENV_MEMORY=
CONFIG_BLE_HOST_QUEUE_CONGESTION_CHECK=
CONFIG_SMP_ENABLE=y
CONFIG_BT_RESERVE_DRAM=0xdb5c

#
# Driver configurations
#

#
# ADC configuration
#
CONFIG_ADC_FORCE_XPD_FSM=
CONFIG_ADC2_DISABLE_DAC=y

#
# SPI configuration
#
CONFIG_SPI_MASTER_IN_IRAM=
CONFIG_SPI_MASTER_ISR_IN_IRAM=y
CONFIG_SPI_SLAVE_IN_IRAM=
CONFIG_SPI_SLAVE_ISR_IN_IRAM=y

#
# eFuse Bit Manager
#
CONFIG_EFUSE_CUSTOM_TABLE=
CONFIG_EFUSE_VIRTUAL=
CONFIG_EFUSE_CODE_SCHEME_COMPAT_NONE=
CONFIG_EFUSE_CODE_SCHEME_COMPAT_3_4=y
CONFIG_EFUSE_CODE_SCHEME_COMPAT_REPEAT=
CONFIG_EFUSE_MAX_BLK_LEN=192

#
# ESP32-specific
#
CONFIG_IDF_TARGET_ESP32=y
CONFIG_ESP32_DEFAULT_CPU_FREQ_80=
CONFIG_ESP32_DEFAULT_CPU_FREQ_160=y
CONFIG_ESP32_DEFAULT_CPU_FREQ_240=
CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ=160
CONFIG_SPIRAM_SUPPORT=
CONFIG_MEMMAP_TRACEMEM=
CONFIG_MEMMAP_TRACEMEM_TWOBANKS=
CONFIG_ESP32_TRAX=
CONFIG_TRACEMEM_RESERVE_DRAM=0x0
CONFIG_TWO_UNIVERSAL_MAC_ADDRESS=
CONFIG_FOUR_UNIVERSAL_MAC_ADDRESS=y
CONFIG_NUMBER_OF_UNIVERSAL_MAC_ADDRESS=4
CONFIG_SYSTEM_EVENT_QUEUE_SIZE=32
CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=2304
CONFIG_MAIN_TASK_STACK_SIZE=3584
CONFIG_IPC_TASK_STACK_SIZE=1024
CONFIG_TIMER_TASK_STACK_SIZE=3584
CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF=y
CONFIG_NEWLIB_STDOUT_LINE_ENDING_LF=
CONFIG_NEWLIB_STDOUT_LINE_ENDING_CR=
CONFIG_NEWLIB_STDIN_LINE_ENDING_CRLF=
CONFIG_NEWLIB_STDIN_LINE_ENDING_LF=
CONFIG_NEWLIB_STDIN_LINE_ENDING_CR=y
CONFIG_NEWLIB_NANO_FORMAT=
CONFIG_CONSOLE_UART_DEFAULT=y
CONFIG_CONSOLE_UART_CUSTOM=
CONFIG_CONSOLE_UART_NONE=
CONFIG_CONSOLE_UART_NUM=0
CONFIG_CONSOLE_UART_BAUDRATE=115200
CONFIG_ULP_COPROC_ENABLED=
CONFIG_ULP_COPROC_RESERVE_MEM=0
CONFIG_ESP32_PANIC_PRINT_HALT=
CONFIG_ESP32_PANIC_PRINT_REBOOT=y
CONFIG_ESP32_PANIC_SILENT_REBOOT=
CONFIG_ESP32_PANIC_GDBSTUB=
CONFIG_ESP32_DEBUG_OCDAWARE=y
CONFIG_ESP32_DEBUG_STUBS_ENABLE=y
CONFIG_INT_WDT=y
CONFIG_INT_WDT_TIMEOUT_MS=300
CONFIG_INT_WDT_CHECK_CPU1=y
CONFIG_TASK_WDT=y
CONFIG_TASK_WDT_PANIC=
CONFIG_TASK_WDT_TIMEOUT_S=5
CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0=y
CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1=y
CONFIG_BROWNOUT_DET=y
CONFIG_BROWNOUT_DET_LVL_SEL_0=y
CONFIG_BROWNOUT_DET_LVL_SEL_1=
CONFIG_BROWNOUT_DET_LVL_SEL_2=
CONFIG_BROWNOUT_DET_LVL_SEL_3=
CONFIG_BROWNOUT_DET_LVL_SEL_4=
CONFIG_BROWNOUT_DET_LVL_SEL_5=
CONFIG_BROWNOUT_DET_LVL_SEL_6=
CONFIG_BROWNOUT_DET_LVL_SEL_7=
CONFIG_BROWNOUT_DET_LVL=0
CONFIG_REDUCE_PHY_TX_POWER=y
CONFIG_ESP32_TIME_SYSCALL_USE_RTC_FRC1=y
CONFIG_ESP32_TIME_SYSCALL_USE_RTC=
CONFIG_ESP32_TIME_SYSCALL_USE_FRC1=
CONFIG_ESP32_TIME_SYSCALL_USE_NONE=
CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC=y
CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_CRYSTAL=
CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_OSC=
CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_8MD256=
CONFIG_ESP32_RTC_CLK_CAL_CYCLES=1024
CONFIG_ESP32_DEEP_SLEEP_WAKEUP_DELAY=2000
CONFIG_ESP32_XTAL_FREQ_40=y
CONFIG_ESP32_XTAL_FREQ_26=
CONFIG_ESP32_XTAL_FREQ_AUTO=
CONFIG_ESP32_XTAL_FREQ=40
CONFIG_DISABLE_BASIC_ROM_CONSOLE=
CONFIG_ESP_TIMER_PROFILING=
CONFIG_COMPATIBLE_PRE_V2_1_BOOTLOADERS=
CONFIG_ESP_ERR_TO_NAME_LOOKUP=y

#
# Wi-Fi
#
CONFIG_SW_COEXIST_ENABLE=y
CONFIG_SW_COEXIST_PREFERENCE_WIFI=
CONFIG_SW_COEXIST_PREFERENCE_BT=
CONFIG_SW_COEXIST_PREFERENCE_BALANCE=y
CONFIG_SW_COEXIST_PREFERENCE_VALUE=2
CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=10
CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32
CONFIG_ESP32_WIFI_STATIC_TX_BUFFER=
CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER=y
CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=1
CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM=32
CONFIG_ESP32_WIFI_CSI_ENABLED=
CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y
CONFIG_ESP32_WIFI_TX_BA_WIN=6
CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y
CONFIG_ESP32_WIFI_RX_BA_WIN=6
CONFIG_ESP32_WIFI_NVS_ENABLED=y
CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_0=y
CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_1=
CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN=752
CONFIG_ESP32_WIFI_MGMT_SBUF_NUM=32
CONFIG_ESP32_WIFI_DEBUG_LOG_ENABLE=
CONFIG_ESP32_WIFI_IRAM_OPT=y

#
# PHY
#
CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE=y
CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION=
CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER=20
CONFIG_ESP32_PHY_MAX_TX_POWER=20

#
# Power Management
#
CONFIG_PM_ENABLE=

#
# ADC-Calibration
#
CONFIG_ADC_CAL_EFUSE_TP_ENABLE=y
CONFIG_ADC_CAL_EFUSE_VREF_ENABLE=y
CONFIG_ADC_CAL_LUT_ENABLE=y

#
# Event Loop Library
#
CONFIG_EVENT_LOOP_PROFILING=

#
# ESP HTTP client
#
CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=y

#
# HTTP Server
#
CONFIG_HTTPD_MAX_REQ_HDR_LEN=512
CONFIG_HTTPD_MAX_URI_LEN=512
CONFIG_HTTPD_ERR_RESP_NO_DELAY=y

#
# ESP HTTPS OTA
#
CONFIG_OTA_ALLOW_HTTP=

#
# Core dump
#
CONFIG_ESP32_ENABLE_COREDUMP_TO_FLASH=
CONFIG_ESP32_ENABLE_COREDUMP_TO_UART=
CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE=y
CONFIG_ESP32_ENABLE_COREDUMP=

#
# Ethernet
#
CONFIG_DMA_RX_BUF_NUM=10
CONFIG_DMA_TX_BUF_NUM=10
CONFIG_EMAC_L2_TO_L3_RX_BUF_MODE=y
CONFIG_EMAC_CHECK_LINK_PERIOD_MS=2000
CONFIG_EMAC_TASK_PRIORITY=20
CONFIG_EMAC_TASK_STACK_SIZE=3072

#
# FAT Filesystem support
#
CONFIG_FATFS_CODEPAGE_DYNAMIC=
CONFIG_FATFS_CODEPAGE_437=y
CONFIG_FATFS_CODEPAGE_720=
CONFIG_FATFS_CODEPAGE_737=
CONFIG_FATFS_CODEPAGE_771=
CONFIG_FATFS_CODEPAGE_775=
CONFIG_FATFS_CODEPAGE_850=
CONFIG_FATFS_CODEPAGE_852=
CONFIG_FATFS_CODEPAGE_855=
CONFIG_FATFS_CODEPAGE_857=
CONFIG_FATFS_CODEPAGE_860=
CONFIG_FATFS_CODEPAGE_861=
CONFIG_FATFS_CODEPAGE_862=
CONFIG_FATFS_CODEPAGE_863=
CONFIG_FATFS_CODEPAGE_864=
CONFIG_FATFS_CODEPAGE_865=
CONFIG_FATFS_CODEPAGE_866=
CONFIG_FATFS_CODEPAGE_869=
CONFIG_FATFS_CODEPAGE_932=
CONFIG_FATFS_CODEPAGE_936=
CONFIG_FATFS_CODEPAGE_949=
CONFIG_FATFS_CODEPAGE_950=
CONFIG_FATFS_CODEPAGE=437
CONFIG_FATFS_LFN_NONE=y
CONFIG_FATFS_LFN_HEAP=
CONFIG_FATFS_LFN_STACK=
CONFIG_FATFS_FS_LOCK=0
CONFIG_FATFS_TIMEOUT_MS=10000
CONFIG_FATFS_PER_FILE_CACHE=y

#
# Modbus configuration
#
CONFIG_MB_QUEUE_LENGTH=20
CONFIG_MB_SERIAL_TASK_STACK_SIZE=2048
CONFIG_MB_SERIAL_BUF_SIZE=256
CONFIG_MB_SERIAL_TASK_PRIO=10
CONFIG_MB_CONTROLLER_SLAVE_ID_SUPPORT=
CONFIG_MB_CONTROLLER_NOTIFY_TIMEOUT=20
CONFIG_MB_CONTROLLER_NOTIFY_QUEUE_SIZE=20
CONFIG_MB_CONTROLLER_STACK_SIZE=4096
CONFIG_MB_EVENT_QUEUE_TIMEOUT=20
CONFIG_MB_TIMER_PORT_ENABLED=y
CONFIG_MB_TIMER_GROUP=0
CONFIG_MB_TIMER_INDEX=0

#
# FreeRTOS
#
CONFIG_FREERTOS_UNICORE=
CONFIG_FREERTOS_NO_AFFINITY=0x7FFFFFFF
CONFIG_FREERTOS_CORETIMER_0=y
CONFIG_FREERTOS_CORETIMER_1=
CONFIG_FREERTOS_HZ=100
CONFIG_FREERTOS_ASSERT_ON_UNTESTED_FUNCTION=y
CONFIG_FREERTOS_CHECK_STACKOVERFLOW_NONE=
CONFIG_FREERTOS_CHECK_STACKOVERFLOW_PTRVAL=
CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY=y
CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK=
CONFIG_FREERTOS_INTERRUPT_BACKTRACE=y
CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS=1
CONFIG_FREERTOS_ASSERT_FAIL_ABORT=y
CONFIG_FREERTOS_ASSERT_FAIL_PRINT_CONTINUE=
CONFIG_FREERTOS_ASSERT_DISABLE=
CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=1536
CONFIG_FREERTOS_ISR_STACKSIZE=1536
CONFIG_FREERTOS_LEGACY_HOOKS=
CONFIG_FREERTOS_MAX_TASK_NAME_LEN=16
CONFIG_SUPPORT_STATIC_ALLOCATION=
CONFIG_TIMER_TASK_PRIORITY=1
CONFIG_TIMER_TASK_STACK_DEPTH=2048
CONFIG_TIMER_QUEUE_LENGTH=10
CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE=0
CONFIG_FREERTOS_USE_TRACE_FACILITY=
CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS=
CONFIG_FREERTOS_DEBUG_INTERNALS=
CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER=y
CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER=y

#
# Heap memory debugging
#
CONFIG_HEAP_POISONING_DISABLED=y
CONFIG_HEAP_POISONING_LIGHT=
CONFIG_HEAP_POISONING_COMPREHENSIVE=
CONFIG_HEAP_TRACING=

#
# libsodium
#
CONFIG_LIBSODIUM_USE_MBEDTLS_SHA=y

#
# Log output
#
CONFIG_LOG_DEFAULT_LEVEL_NONE=
CONFIG_LOG_DEFAULT_LEVEL_ERROR=
CONFIG_LOG_DEFAULT_LEVEL_WARN=
CONFIG_LOG_DEFAULT_LEVEL_INFO=y
CONFIG_LOG_DEFAULT_LEVEL_DEBUG=
CONFIG_LOG_DEFAULT_LEVEL_VERBOSE=
CONFIG_LOG_DEFAULT_LEVEL=3
CONFIG_LOG_COLORS=y

#
# LWIP
#
CONFIG_L2_TO_L3_COPY=
CONFIG_LWIP_IRAM_OPTIMIZATION=
CONFIG_LWIP_MAX_SOCKETS=10
CONFIG_USE_ONLY_LWIP_SELECT=
CONFIG_LWIP_SO_REUSE=y
CONFIG_LWIP_SO_REUSE_RXTOALL=y
CONFIG_LWIP_SO_RCVBUF=
CONFIG_LWIP_DHCP_MAX_NTP_SERVERS=1
CONFIG_LWIP_IP_FRAG=
CONFIG_LWIP_IP_REASSEMBLY=
CONFIG_LWIP_STATS=
CONFIG_LWIP_ETHARP_TRUST_IP_MAC=
CONFIG_ESP_GRATUITOUS_ARP=y
CONFIG_GARP_TMR_INTERVAL=60
CONFIG_TCPIP_RECVMBOX_SIZE=32
CONFIG_LWIP_DHCP_DOES_ARP_CHECK=y
CONFIG_LWIP_DHCP_RESTORE_LAST_IP=

#
# DHCP server
#
CONFIG_LWIP_DHCPS_LEASE_UNIT=60
CONFIG_LWIP_DHCPS_MAX_STATION_NUM=8
CONFIG_LWIP_AUTOIP=
CONFIG_LWIP_NETIF_LOOPBACK=y
CONFIG_LWIP_LOOPBACK_MAX_PBUFS=8

#
# TCP
#
CONFIG_LWIP_MAX_ACTIVE_TCP=16
CONFIG_LWIP_MAX_LISTENING_TCP=16
CONFIG_TCP_MAXRTX=12
CONFIG_TCP_SYNMAXRTX=6
CONFIG_TCP_MSS=1436
CONFIG_TCP_MSL=60000
CONFIG_TCP_SND_BUF_DEFAULT=5744
CONFIG_TCP_WND_DEFAULT=5744
CONFIG_TCP_RECVMBOX_SIZE=6
CONFIG_TCP_QUEUE_OOSEQ=y
CONFIG_ESP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES=
CONFIG_TCP_OVERSIZE_MSS=y
CONFIG_TCP_OVERSIZE_QUARTER_MSS=
CONFIG_TCP_OVERSIZE_DISABLE=

#
# UDP
#
CONFIG_LWIP_MAX_UDP_PCBS=16
CONFIG_UDP_RECVMBOX_SIZE=6
CONFIG_TCPIP_TASK_STACK_SIZE=3072
CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY=y
CONFIG_TCPIP_TASK_AFFINITY_CPU0=
CONFIG_TCPIP_TASK_AFFINITY_CPU1=
CONFIG_TCPIP_TASK_AFFINITY=0x7FFFFFFF
CONFIG_PPP_SUPPORT=

#
# ICMP
#
CONFIG_LWIP_MULTICAST_PING=
CONFIG_LWIP_BROADCAST_PING=

#
# LWIP RAW API
#
CONFIG_LWIP_MAX_RAW_PCBS=16

#
# mbedTLS
#
CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
CONFIG_MBEDTLS_DEFAULT_MEM_ALLOC=
CONFIG_MBEDTLS_CUSTOM_MEM_ALLOC=
CONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN=16384
CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=
CONFIG_MBEDTLS_DEBUG=
CONFIG_MBEDTLS_HARDWARE_AES=y
CONFIG_MBEDTLS_HARDWARE_MPI=
CONFIG_MBEDTLS_HARDWARE_SHA=
CONFIG_MBEDTLS_HAVE_TIME=y
CONFIG_MBEDTLS_HAVE_TIME_DATE=
CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=y
CONFIG_MBEDTLS_TLS_SERVER_ONLY=
CONFIG_MBEDTLS_TLS_CLIENT_ONLY=
CONFIG_MBEDTLS_TLS_DISABLED=
CONFIG_MBEDTLS_TLS_SERVER=y
CONFIG_MBEDTLS_TLS_CLIENT=y
CONFIG_MBEDTLS_TLS_ENABLED=y

#
# TLS Key Exchange Methods
#
CONFIG_MBEDTLS_PSK_MODES=
CONFIG_MBEDTLS_KEY_EXCHANGE_RSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_RSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA=y
CONFIG_MBEDTLS_SSL_RENEGOTIATION=y
CONFIG_MBEDTLS_SSL_PROTO_SSL3=
CONFIG_MBEDTLS_SSL_PROTO_TLS1=y
CONFIG_MBEDTLS_SSL_PROTO_TLS1_1=y
CONFIG_MBEDTLS_SSL_PROTO_TLS1_2=y
CONFIG_MBEDTLS_SSL_PROTO_DTLS=
CONFIG_MBEDTLS_SSL_ALPN=y
CONFIG_MBEDTLS_SSL_SESSION_TICKETS=y

#
# Symmetric Ciphers
#
CONFIG_MBEDTLS_AES_C=y
CONFIG_MBEDTLS_CAMELLIA_C=
CONFIG_MBEDTLS_DES_C=
CONFIG_MBEDTLS_RC4_DISABLED=y
CONFIG_MBEDTLS_RC4_ENABLED_NO_DEFAULT=
CONFIG_MBEDTLS_RC4_ENABLED=
CONFIG_MBEDTLS_BLOWFISH_C=
CONFIG_MBEDTLS_XTEA_C=
CONFIG_MBEDTLS_CCM_C=y
CONFIG_MBEDTLS_GCM_C=y
CONFIG_MBEDTLS_RIPEMD160_C=

#
# Certificates
#
CONFIG_MBEDTLS_PEM_PARSE_C=y
CONFIG_MBEDTLS_PEM_WRITE_C=y
CONFIG_MBEDTLS_X509_CRL_PARSE_C=y
CONFIG_MBEDTLS_X509_CSR_PARSE_C=y
CONFIG_MBEDTLS_ECP_C=y
CONFIG_MBEDTLS_ECDH_C=y
CONFIG_MBEDTLS_ECDSA_C=y
CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED=y
CONFIG_MBEDTLS_ECP_NIST_OPTIM=y

#
# mDNS
#
CONFIG_MDNS_MAX_SERVICES=10

#
# ESP-MQTT Configurations
#
CONFIG_MQTT_PROTOCOL_311=y
CONFIG_MQTT_TRANSPORT_SSL=y
CONFIG_MQTT_TRANSPORT_WEBSOCKET=y
CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE=y
CONFIG_MQTT_USE_CUSTOM_CONFIG=
CONFIG_MQTT_TASK_CORE_SELECTION_ENABLED=
CONFIG_MQTT_CUSTOM_OUTBOX=

#
# NVS
#

#
# OpenSSL
#
CONFIG_OPENSSL_DEBUG=
CONFIG_OPENSSL_ASSERT_DO_NOTHING=y
CONFIG_OPENSSL_ASSERT_EXIT=

#
# PThreads
#
CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT=5
CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072
CONFIG_PTHREAD_STACK_MIN=768
CONFIG_ESP32_DEFAULT_PTHREAD_CORE_NO_AFFINITY=y
CONFIG_ESP32_DEFAULT_PTHREAD_CORE_0=
CONFIG_ESP32_DEFAULT_PTHREAD_CORE_1=
CONFIG_ESP32_PTHREAD_TASK_CORE_DEFAULT=-1
CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT="pthread"

#
# SPI Flash driver
#
CONFIG_SPI_FLASH_VERIFY_WRITE=
CONFIG_SPI_FLASH_ENABLE_COUNTERS=
CONFIG_SPI_FLASH_ROM_DRIVER_PATCH=y

#
# SPIFFS Configuration
#
CONFIG_SPIFFS_MAX_PARTITIONS=3

#
# SPIFFS Cache Configuration
#
CONFIG_SPIFFS_CACHE=y
CONFIG_SPIFFS_CACHE_WR=y
CONFIG_SPIFFS_CACHE_STATS=
CONFIG_SPIFFS_PAGE_CHECK=y
CONFIG_SPIFFS_GC_MAX_RUNS=10
CONFIG_SPIFFS_GC_STATS=
CONFIG_SPIFFS_PAGE_SIZE=256
CONFIG_SPIFFS_OBJ_NAME_LEN=32
CONFIG_SPIFFS_USE_MAGIC=y
CONFIG_SPIFFS_USE_MAGIC_LENGTH=y
CONFIG_SPIFFS_META_LENGTH=4
CONFIG_SPIFFS_USE_MTIME=y

#
# Debug Configuration
#
CONFIG_SPIFFS_DBG=
CONFIG_SPIFFS_API_DBG=
CONFIG_SPIFFS_GC_DBG=
CONFIG_SPIFFS_CACHE_DBG=
CONFIG_SPIFFS_CHECK_DBG=
CONFIG_SPIFFS_TEST_VISUALISATION=

#
# TCP/IP Adapter
#
CONFIG_IP_LOST_TIMER_INTERVAL=120
CONFIG_TCPIP_LWIP=y

#
# Unity unit testing library
#
CONFIG_UNITY_ENABLE_FLOAT=y
CONFIG_UNITY_ENABLE_DOUBLE=y
CONFIG_UNITY_ENABLE_COLOR=
CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER=y
CONFIG_UNITY_ENABLE_FIXTURE=

#
# Virtual file system
#
CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT=y
CONFIG_SUPPORT_TERMIOS=y

#
# Wear Levelling
#
CONFIG_WL_SECTOR_SIZE_512=
CONFIG_WL_SECTOR_SIZE_4096=y
CONFIG_WL_SECTOR_SIZE=4096

/*
 *
 * Automatically generated file; DO NOT EDIT.
 * Espressif IoT Development Framework Configuration
 *
 */
#define CONFIG_ESP32_PHY_MAX_TX_POWER 20
#define CONFIG_TRACEMEM_RESERVE_DRAM 0x0
#define CONFIG_FREERTOS_MAX_TASK_NAME_LEN 16
#define CONFIG_MQTT_TRANSPORT_SSL 1
#define CONFIG_FATFS_LFN_NONE 1
#define CONFIG_SDP_INITIAL_TRACE_LEVEL 2
#define CONFIG_MB_SERIAL_TASK_PRIO 10
#define CONFIG_MQTT_PROTOCOL_311 1
#define CONFIG_TCP_RECVMBOX_SIZE 6
#define CONFIG_FATFS_CODEPAGE_437 1
#define CONFIG_AVDT_TRACE_LEVEL_WARNING 1
#define CONFIG_TCP_WND_DEFAULT 5744
#define CONFIG_PARTITION_TABLE_OFFSET 0x8000
#define CONFIG_SW_COEXIST_ENABLE 1
#define CONFIG_SPIFFS_USE_MAGIC_LENGTH 1
#define CONFIG_AVCT_INITIAL_TRACE_LEVEL 2
#define CONFIG_IPC_TASK_STACK_SIZE 1024
#define CONFIG_FATFS_PER_FILE_CACHE 1
#define CONFIG_ESPTOOLPY_FLASHFREQ "40m"
#define CONFIG_MBEDTLS_KEY_EXCHANGE_RSA 1
#define CONFIG_UDP_RECVMBOX_SIZE 6
#define CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE 0
#define CONFIG_MBEDTLS_AES_C 1
#define CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED 1
#define CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN 752
#define CONFIG_MBEDTLS_GCM_C 1
#define CONFIG_ESPTOOLPY_FLASHSIZE "2MB"
#define CONFIG_HEAP_POISONING_DISABLED 1
#define CONFIG_SPIFFS_CACHE_WR 1
#define CONFIG_BROWNOUT_DET_LVL_SEL_0 1
#define CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER 1
#define CONFIG_EMAC_L2_TO_L3_RX_BUF_MODE 1
#define CONFIG_BTDM_CONTROLLER_MODEM_SLEEP 1
#define CONFIG_SPIFFS_CACHE 1
#define CONFIG_INT_WDT 1
#define CONFIG_MBEDTLS_SSL_PROTO_TLS1 1
#define CONFIG_ESP_GRATUITOUS_ARP 1
#define CONFIG_MBEDTLS_ECDSA_C 1
#define CONFIG_ESPTOOLPY_FLASHFREQ_40M 1
#define CONFIG_LOG_BOOTLOADER_LEVEL_INFO 1
#define CONFIG_ESPTOOLPY_FLASHSIZE_2MB 1
#define CONFIG_HTTPD_MAX_REQ_HDR_LEN 512
#define CONFIG_BTDM_CONTROLLER_PINNED_TO_CORE 0
#define CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS 1
#define CONFIG_MBEDTLS_ECDH_C 1
#define CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE 1
#define CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM 10
#define CONFIG_MBEDTLS_SSL_ALPN 1
#define CONFIG_BTM_TRACE_LEVEL_WARNING 1
#define CONFIG_MBEDTLS_PEM_WRITE_C 1
#define CONFIG_BT_SPP_ENABLED 1
#define CONFIG_RFCOMM_TRACE_LEVEL_WARNING 1
#define CONFIG_LOG_DEFAULT_LEVEL_INFO 1
#define CONFIG_BT_RESERVE_DRAM 0xdb5c
#define CONFIG_APP_COMPILE_TIME_DATE 1
#define CONFIG_FATFS_FS_LOCK 0
#define CONFIG_IP_LOST_TIMER_INTERVAL 120
#define CONFIG_SPIFFS_META_LENGTH 4
#define CONFIG_ESP32_PANIC_PRINT_REBOOT 1
#define CONFIG_MB_CONTROLLER_NOTIFY_QUEUE_SIZE 20
#define CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED 1
#define CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED 1
#define CONFIG_MB_SERIAL_BUF_SIZE 256
#define CONFIG_CONSOLE_UART_BAUDRATE 115200
#define CONFIG_LWIP_MAX_SOCKETS 10
#define CONFIG_LWIP_NETIF_LOOPBACK 1
#define CONFIG_MCA_TRACE_LEVEL_WARNING 1
#define CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT "pthread"
#define CONFIG_EMAC_TASK_PRIORITY 20
#define CONFIG_TIMER_TASK_STACK_DEPTH 2048
#define CONFIG_TCP_MSS 1436
#define CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED 1
#define CONFIG_BTIF_INITIAL_TRACE_LEVEL 2
#define CONFIG_BTDM_CONTROLLER_BLE_MAX_CONN_EFF 0
#define CONFIG_EFUSE_CODE_SCHEME_COMPAT_3_4 1
#define CONFIG_FATFS_CODEPAGE 437
#define CONFIG_APPL_TRACE_LEVEL_WARNING 1
#define CONFIG_BTC_INITIAL_TRACE_LEVEL 2
#define CONFIG_ESP32_DEFAULT_CPU_FREQ_160 1
#define CONFIG_ULP_COPROC_RESERVE_MEM 0
#define CONFIG_LWIP_MAX_UDP_PCBS 16
#define CONFIG_ESPTOOLPY_BAUD 115200
#define CONFIG_INT_WDT_CHECK_CPU1 1
#define CONFIG_AVRC_INITIAL_TRACE_LEVEL 2
#define CONFIG_ADC_CAL_LUT_ENABLE 1
#define CONFIG_FLASHMODE_DIO 1
#define CONFIG_ESPTOOLPY_AFTER_RESET 1
#define CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED 1
#define CONFIG_LWIP_DHCPS_MAX_STATION_NUM 8
#define CONFIG_TOOLPREFIX "xtensa-esp32-elf-"
#define CONFIG_MBEDTLS_ECP_C 1
#define CONFIG_FREERTOS_IDLE_TASK_STACKSIZE 1536
#define CONFIG_MBEDTLS_RC4_DISABLED 1
#define CONFIG_GAP_TRACE_LEVEL_WARNING 1
#define CONFIG_CONSOLE_UART_NUM 0
#define CONFIG_ESP32_APPTRACE_LOCK_ENABLE 1
#define CONFIG_BTDM_CONTROLLER_MODE_BR_EDR_ONLY 1
#define CONFIG_PTHREAD_STACK_MIN 768
#define CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC 1
#define CONFIG_ESPTOOLPY_BAUD_115200B 1
#define CONFIG_TCP_OVERSIZE_MSS 1
#define CONFIG_FOUR_UNIVERSAL_MAC_ADDRESS 1
#define CONFIG_CONSOLE_UART_DEFAULT 1
#define CONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN 16384
#define CONFIG_NUMBER_OF_UNIVERSAL_MAC_ADDRESS 4
#define CONFIG_GATT_TRACE_LEVEL_WARNING 1
#define CONFIG_ESPTOOLPY_FLASHSIZE_DETECT 1
#define CONFIG_TIMER_TASK_STACK_SIZE 3584
#define CONFIG_BTIF_TRACE_LEVEL_WARNING 1
#define CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE 1
#define CONFIG_HCI_INITIAL_TRACE_LEVEL 2
#define CONFIG_AVDT_INITIAL_TRACE_LEVEL 2
#define CONFIG_MBEDTLS_X509_CRL_PARSE_C 1
#define CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER 1
#define CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER 1
#define CONFIG_MB_SERIAL_TASK_STACK_SIZE 2048
#define CONFIG_LWIP_DHCPS_LEASE_UNIT 60
#define CONFIG_EFUSE_MAX_BLK_LEN 192
#define CONFIG_SPIFFS_USE_MAGIC 1
#define CONFIG_TCPIP_TASK_STACK_SIZE 3072
#define CONFIG_BLUFI_TRACE_LEVEL_WARNING 1
#define CONFIG_BLUEDROID_PINNED_TO_CORE_0 1
#define CONFIG_TASK_WDT 1
#define CONFIG_RFCOMM_INITIAL_TRACE_LEVEL 2
#define CONFIG_MAIN_TASK_STACK_SIZE 3584
#define CONFIG_SPIFFS_PAGE_CHECK 1
#define CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_0 1
#define CONFIG_LWIP_MAX_ACTIVE_TCP 16
#define CONFIG_TASK_WDT_TIMEOUT_S 5
#define CONFIG_INT_WDT_TIMEOUT_MS 300
#define CONFIG_ESPTOOLPY_FLASHMODE "dio"
#define CONFIG_BTC_TASK_STACK_SIZE 3072
#define CONFIG_BLUEDROID_ENABLED 1
#define CONFIG_NEWLIB_STDIN_LINE_ENDING_CR 1
#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA 1
#define CONFIG_ESPTOOLPY_BEFORE "default_reset"
#define CONFIG_ADC2_DISABLE_DAC 1
#define CONFIG_LOG_DEFAULT_LEVEL 3
#define CONFIG_FREERTOS_ASSERT_ON_UNTESTED_FUNCTION 1
#define CONFIG_TIMER_QUEUE_LENGTH 10
#define CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT 1
#define CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY 1
#define CONFIG_MAKE_WARN_UNDEFINED_VARIABLES 1
#define CONFIG_FATFS_TIMEOUT_MS 10000
#define CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM 32
#define CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS 1
#define CONFIG_PAN_INITIAL_TRACE_LEVEL 2
#define CONFIG_MBEDTLS_CCM_C 1
#define CONFIG_SPI_MASTER_ISR_IN_IRAM 1
#define CONFIG_MCA_INITIAL_TRACE_LEVEL 2
#define CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER 20
#define CONFIG_A2D_INITIAL_TRACE_LEVEL 2
#define CONFIG_ESP32_RTC_CLK_CAL_CYCLES 1024
#define CONFIG_ESP32_WIFI_TX_BA_WIN 6
#define CONFIG_ESP32_WIFI_NVS_ENABLED 1
#define CONFIG_MDNS_MAX_SERVICES 10
#define CONFIG_IDF_TARGET_ESP32 1
#define CONFIG_EMAC_CHECK_LINK_PERIOD_MS 2000
#define CONFIG_BTDM_LPCLK_SEL_MAIN_XTAL 1
#define CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED 1
#define CONFIG_LIBSODIUM_USE_MBEDTLS_SHA 1
#define CONFIG_DMA_RX_BUF_NUM 10
#define CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED 1
#define CONFIG_TCP_SYNMAXRTX 6
#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA 1
#define CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_SYNC_CONN_EFF 0
#define CONFIG_PYTHON "python"
#define CONFIG_MBEDTLS_ECP_NIST_OPTIM 1
#define CONFIG_ESP32_TIME_SYSCALL_USE_RTC_FRC1 1
#define CONFIG_ESPTOOLPY_COMPRESSED 1
#define CONFIG_PARTITION_TABLE_FILENAME "partitions_singleapp.csv"
#define CONFIG_MB_CONTROLLER_STACK_SIZE 4096
#define CONFIG_TCP_SND_BUF_DEFAULT 5744
#define CONFIG_GARP_TMR_INTERVAL 60
#define CONFIG_LWIP_DHCP_MAX_NTP_SERVERS 1
#define CONFIG_BNEP_INITIAL_TRACE_LEVEL 2
#define CONFIG_HCI_TRACE_LEVEL_WARNING 1
#define CONFIG_TCP_MSL 60000
#define CONFIG_MBEDTLS_SSL_PROTO_TLS1_1 1
#define CONFIG_LWIP_SO_REUSE_RXTOALL 1
#define CONFIG_MB_CONTROLLER_NOTIFY_TIMEOUT 20
#define CONFIG_ESP32_WIFI_MGMT_SBUF_NUM 32
#define CONFIG_PARTITION_TABLE_SINGLE_APP 1
#define CONFIG_UNITY_ENABLE_FLOAT 1
#define CONFIG_ESP32_WIFI_RX_BA_WIN 6
#define CONFIG_MBEDTLS_X509_CSR_PARSE_C 1
#define CONFIG_SPIFFS_USE_MTIME 1
#define CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_SYNC_CONN 0
#define CONFIG_BTC_TRACE_LEVEL_WARNING 1
#define CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_ACL_CONN 2
#define CONFIG_EMAC_TASK_STACK_SIZE 3072
#define CONFIG_SMP_TRACE_LEVEL_WARNING 1
#define CONFIG_MB_QUEUE_LENGTH 20
#define CONFIG_SW_COEXIST_PREFERENCE_VALUE 2
#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA 1
#define CONFIG_LWIP_DHCP_DOES_ARP_CHECK 1
#define CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER 1
#define CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE 2304
#define CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V 1
#define CONFIG_A2D_TRACE_LEVEL_WARNING 1
#define CONFIG_ESP32_DEEP_SLEEP_WAKEUP_DELAY 2000
#define CONFIG_BROWNOUT_DET_LVL 0
#define CONFIG_MBEDTLS_PEM_PARSE_C 1
#define CONFIG_SPIFFS_GC_MAX_RUNS 10
#define CONFIG_ESP32_APPTRACE_DEST_NONE 1
#define CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC 1
#define CONFIG_MBEDTLS_SSL_PROTO_TLS1_2 1
#define CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_RSA 1
#define CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM 32
#define CONFIG_HTTPD_MAX_URI_LEN 512
#define CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED 1
#define CONFIG_AVCT_TRACE_LEVEL_WARNING 1
#define CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED 1
#define CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1 1
#define CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ 160
#define CONFIG_MBEDTLS_HARDWARE_AES 1
#define CONFIG_FREERTOS_HZ 100
#define CONFIG_LOG_COLORS 1
#define CONFIG_OSI_TRACE_LEVEL_WARNING 1
#define CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE 1
#define CONFIG_STACK_CHECK_NONE 1
#define CONFIG_ADC_CAL_EFUSE_TP_ENABLE 1
#define CONFIG_BNEP_TRACE_LEVEL_WARNING 1
#define CONFIG_FREERTOS_ASSERT_FAIL_ABORT 1
#define CONFIG_BROWNOUT_DET 1
#define CONFIG_ESP32_XTAL_FREQ 40
#define CONFIG_OSI_INITIAL_TRACE_LEVEL 2
#define CONFIG_MONITOR_BAUD_115200B 1
#define CONFIG_LOG_BOOTLOADER_LEVEL 3
#define CONFIG_MBEDTLS_TLS_ENABLED 1
#define CONFIG_LWIP_MAX_RAW_PCBS 16
#define CONFIG_BTU_TASK_STACK_SIZE 4096
#define CONFIG_SMP_ENABLE 1
#define CONFIG_HID_TRACE_LEVEL_WARNING 1
#define CONFIG_AVRC_TRACE_LEVEL_WARNING 1
#define CONFIG_MBEDTLS_SSL_SESSION_TICKETS 1
#define CONFIG_SPIFFS_MAX_PARTITIONS 3
#define CONFIG_ESP_ERR_TO_NAME_LOOKUP 1
#define CONFIG_BTDM_CONTROLLER_PINNED_TO_CORE_0 1
#define CONFIG_MBEDTLS_SSL_RENEGOTIATION 1
#define CONFIG_HID_INITIAL_TRACE_LEVEL 2
#define CONFIG_ESPTOOLPY_BEFORE_RESET 1
#define CONFIG_MB_EVENT_QUEUE_TIMEOUT 20
#define CONFIG_ESPTOOLPY_BAUD_OTHER_VAL 115200
#define CONFIG_SPIFFS_OBJ_NAME_LEN 32
#define CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT 5
#define CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_ACL_CONN_EFF 2
#define CONFIG_PARTITION_TABLE_MD5 1
#define CONFIG_TCPIP_RECVMBOX_SIZE 32
#define CONFIG_TCP_MAXRTX 12
#define CONFIG_BTM_INITIAL_TRACE_LEVEL 2
#define CONFIG_ESPTOOLPY_AFTER "hard_reset"
#define CONFIG_TCPIP_TASK_AFFINITY 0x7FFFFFFF
#define CONFIG_LWIP_SO_REUSE 1
#define CONFIG_ESP32_XTAL_FREQ_40 1
#define CONFIG_DMA_TX_BUF_NUM 10
#define CONFIG_LWIP_MAX_LISTENING_TCP 16
#define CONFIG_FREERTOS_INTERRUPT_BACKTRACE 1
#define CONFIG_WL_SECTOR_SIZE 4096
#define CONFIG_ESP32_DEBUG_OCDAWARE 1
#define CONFIG_MQTT_TRANSPORT_WEBSOCKET 1
#define CONFIG_TIMER_TASK_PRIORITY 1
#define CONFIG_MBEDTLS_TLS_CLIENT 1
#define CONFIG_BTDM_CONTROLLER_HCI_MODE_VHCI 1
#define CONFIG_BT_ENABLED 1
#define CONFIG_ESP32_DEFAULT_PTHREAD_CORE_NO_AFFINITY 1
#define CONFIG_SDP_TRACE_LEVEL_WARNING 1
#define CONFIG_BT_SSP_ENABLED 1
#define CONFIG_SW_COEXIST_PREFERENCE_BALANCE 1
#define CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED 1
#define CONFIG_MONITOR_BAUD 115200
#define CONFIG_ESP32_PTHREAD_TASK_CORE_DEFAULT -1
#define CONFIG_ESP32_DEBUG_STUBS_ENABLE 1
#define CONFIG_TCPIP_LWIP 1
#define CONFIG_REDUCE_PHY_TX_POWER 1
#define CONFIG_BOOTLOADER_WDT_TIME_MS 9000
#define CONFIG_PAN_TRACE_LEVEL_WARNING 1
#define CONFIG_FREERTOS_CORETIMER_0 1
#define CONFIG_PARTITION_TABLE_CUSTOM_FILENAME "partitions.csv"
#define CONFIG_MBEDTLS_HAVE_TIME 1
#define CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY 1
#define CONFIG_TCP_QUEUE_OOSEQ 1
#define CONFIG_ADC_CAL_EFUSE_VREF_ENABLE 1
#define CONFIG_MBEDTLS_TLS_SERVER 1
#define CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT 1
#define CONFIG_FREERTOS_ISR_STACKSIZE 1536
#define CONFIG_SUPPORT_TERMIOS 1
#define CONFIG_CLASSIC_BT_ENABLED 1
#define CONFIG_OPENSSL_ASSERT_DO_NOTHING 1
#define CONFIG_IDF_TARGET "esp32"
#define CONFIG_WL_SECTOR_SIZE_4096 1
#define CONFIG_OPTIMIZATION_LEVEL_DEBUG 1
#define CONFIG_GATT_INITIAL_TRACE_LEVEL 2
#define CONFIG_FREERTOS_NO_AFFINITY 0x7FFFFFFF
#define CONFIG_L2CAP_TRACE_LEVEL_WARNING 1
#define CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED 1
#define CONFIG_HTTPD_ERR_RESP_NO_DELAY 1
#define CONFIG_MB_TIMER_INDEX 0
#define CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED 1
#define CONFIG_APPL_INITIAL_TRACE_LEVEL 2
#define CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED 1
#define CONFIG_SMP_INITIAL_TRACE_LEVEL 2
#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA 1
#define CONFIG_SPI_SLAVE_ISR_IN_IRAM 1
#define CONFIG_L2CAP_INITIAL_TRACE_LEVEL 2
#define CONFIG_SYSTEM_EVENT_QUEUE_SIZE 32
#define CONFIG_BT_ACL_CONNECTIONS 4
#define CONFIG_ESP32_WIFI_TX_BUFFER_TYPE 1
#define CONFIG_BOOTLOADER_WDT_ENABLE 1
#define CONFIG_GAP_INITIAL_TRACE_LEVEL 2
#define CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED 1
#define CONFIG_LWIP_LOOPBACK_MAX_PBUFS 8
#define CONFIG_MB_TIMER_GROUP 0
#define CONFIG_SPI_FLASH_ROM_DRIVER_PATCH 1
#define CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE 1
#define CONFIG_SPIFFS_PAGE_SIZE 256
#define CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED 1
#define CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0 1
#define CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT 3072
#define CONFIG_MB_TIMER_PORT_ENABLED 1
#define CONFIG_MONITOR_BAUD_OTHER_VAL 115200
#define CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF 1
#define CONFIG_ESPTOOLPY_PORT "/dev/ttyUSB0"
#define CONFIG_UNITY_ENABLE_DOUBLE 1
#define CONFIG_BLUEDROID_PINNED_TO_CORE 0
#define CONFIG_BTDM_MODEM_SLEEP_MODE_ORIG 1
#define CONFIG_ESP32_WIFI_IRAM_OPT 1
#define CONFIG_BLUFI_INITIAL_TRACE_LEVEL 2

Andreas' Blog

Just another WordPress site

xinput Remapping mouse buttons

FreeBSD 12.0 on PC Engines APU

Packages

802.1X

DHCP Server

DNS Server

Firewall

PuTTY on Linux: Clipboard Issue (Copy/Paste)

Linux Find all Serial Ports (ttyS, ttyUSB, …)

Windows 10 Release Info / Versionen

ESP-IDF Logging

ESP32: ESP-IDF JTAG Debugging

ESP-IDF Bluetooth

Class of Device/Service = CoD

TIAO USB Multi Protocol Adapter (TUMPA)

ESP-IDF: SPP Acceptor sdkconfig