Configure WROVER JTAG Interface (FT2232 => TIAO TUMPA!)
TIAO USB Multi-Protocol Adapter (TUMPA)

Reading symbols from c:/Users/andreas/Documents/PlatformIO/Projects/lolin32-arduino-spp-proxy/.pioenvs/lolin32/firmware.elf...
done.
PlatformIO Unified Debugger > http://bit.ly/pio-debug
PlatformIO: Initializing remote target...
Open On-Chip Debugger  v0.10.0-esp32-20190313 (2019-03-13-09:57)
Licensed under GNU GPL v2
For bug reports, read
	http://openocd.org/doc/doxygen/bugs.html
none separate
adapter speed: 20000 kHz
Info : Configured 2 cores
esp32 interrupt mask on
Info : tcl server disabled
Info : telnet server disabled
Info : ftdi: if you experience problems at higher adapter clocks, try the command "ftdi_tdo_sample_edge falling"
Info : clock speed 20000 kHz
Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : esp32: Debug controller 0 was reset (pwrstat=0x5F, after clear 0x0F).
Info : esp32: Core 0 was reset (pwrstat=0x5F, after clear 0x0F).
Info : accepting 'gdb' connection from pipe
Error: No symbols for FreeRTOS
Info : Target halted. PRO_CPU: PC=0x40078630 (active)    APP_CPU: PC=0x00000000
Info : Target halted. PRO_CPU: PC=0x4009171A (active)    APP_CPU: PC=0x00000000
Info : Flash mapping 0: 0x10020 -> 0x3f400020, 103 KB
Info : Flash mapping 1: 0x30018 -> 0x400d0018, 730 KB
Info : Target halted. PRO_CPU: PC=0x4009171A (active)    APP_CPU: PC=0x00000000
Info : Auto-detected flash size 4096 KB
Info : Using flash size 4096 KB
Info : Target halted. PRO_CPU: PC=0x4009171A (active)    APP_CPU: PC=0x00000000
Info : Flash mapping 0: 0x10020 -> 0x3f400020, 103 KB
Info : Flash mapping 1: 0x30018 -> 0x400d0018, 730 KB
Info : Using flash size 732 KB
Info : Target halted. PRO_CPU: PC=0x4009171A (active)    APP_CPU: PC=0x00000000
Info : Flash mapping 0: 0x10020 -> 0x3f400020, 103 KB
Info : Flash mapping 1: 0x30018 -> 0x400d0018, 730 KB
Info : Using flash size 104 KB
0x40078630 in ?? ()
Error: Too large number of threads 3623786614!
Hardware assisted breakpoint 1 at 0x400d2db8: file C:\Users\andreas\.platformio\packages\framework-arduinoespressif32\cores\esp32\main.cpp, line 24.
Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : esp32: Debug controller 0 was reset (pwrstat=0x5F, after clear 0x0F).
Info : esp32: Core 0 was reset (pwrstat=0x5F, after clear 0x0F).
esp32: Debug controller 0 was reset (pwrstat=0x5F, after clear 0x0F).
esp32: Core 0 was reset (pwrstat=0x5F, after clear 0x0F).
Info : Target halted. PRO_CPU: PC=0x5000004B (active)    APP_CPU: PC=0x00000000
Target halted. PRO_CPU: PC=0x5000004B (active)    APP_CPU: PC=0x00000000
Info : esp32: Core 0 was reset (pwrstat=0x1F, after clear 0x0F).
Info : esp32: Debug controller 1 was reset (pwrstat=0x5F, after clear 0x0F).
Info : esp32: Core 1 was reset (pwrstat=0x5F, after clear 0x0F).
esp32: Core 0 was reset (pwrstat=0x1F, after clear 0x0F).
esp32: Debug controller 1 was reset (pwrstat=0x5F, after clear 0x0F).
esp32: Core 1 was reset (pwrstat=0x5F, after clear 0x0F).
Info : Target halted. PRO_CPU: PC=0x40000400 (active)    APP_CPU: PC=0x40000400
** Programming Started **
Target halted. PRO_CPU: PC=0x40000400 (active)    APP_CPU: PC=0x40000400
** Programming Started **
auto erase enabled
auto erase enabled
Info : Target halted. PRO_CPU: PC=0x4009171A (active)    APP_CPU: PC=0x40000400
Target halted. PRO_CPU: PC=0x4009171A (active)    APP_CPU: PC=0x40000400
Info : Target halted. PRO_CPU: PC=0x4009171A (active)    APP_CPU: PC=0x40000400
Target halted. PRO_CPU: PC=0x4009171A (active)    APP_CPU: PC=0x40000400
wrote 20480 bytes from file C:/Users/andreas/.platformio/packages/framework-arduinoespressif32/tools/sdk/bin/bootloader_dio_40m.bin in 0.859131s (23.279 KiB/s)
wrote 20480 bytes from file C:/Users/andreas/.platformio/packages/framework-arduinoespressif32/tools/sdk/bin/bootloader_dio_40m.bin in 0.859131s (23.279 KiB/s)
** Programming Finished **
** Verify Started **
** Programming Finished **
** Verify Started **
Info : Target halted. PRO_CPU: PC=0x4009171A (active)    APP_CPU: PC=0x40000400
Target halted. PRO_CPU: PC=0x4009171A (active)    APP_CPU: PC=0x40000400
read 16848 bytes from file C:/Users/andreas/.platformio/packages/framework-arduinoespressif32/tools/sdk/bin/bootloader_dio_40m.bin and flash bank 0 at offset 0x00001000 in 0.345154s (47.669 KiB/s)
contents match
read 16848 bytes from file C:/Users/andreas/.platformio/packages/framework-arduinoespressif32/tools/sdk/bin/bootloader_dio_40m.bin and flash bank 0 at offset 0x00001000 in 0.345154s (47.669 KiB/s)
contents match
** Verified OK **
** Verified OK **
Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : esp32: Debug controller 0 was reset (pwrstat=0x5F, after clear 0x0F).
Info : esp32: Core 0 was reset (pwrstat=0x5F, after clear 0x0F).
esp32: Debug controller 0 was reset (pwrstat=0x5F, after clear 0x0F).
esp32: Core 0 was reset (pwrstat=0x5F, after clear 0x0F).
Info : Target halted. PRO_CPU: PC=0x5000004B (active)    APP_CPU: PC=0x00000000
Target halted. PRO_CPU: PC=0x5000004B (active)    APP_CPU: PC=0x00000000
Info : esp32: Core 0 was reset (pwrstat=0x1F, after clear 0x0F).
Info : esp32: Debug controller 1 was reset (pwrstat=0x5F, after clear 0x0F).
Info : esp32: Core 1 was reset (pwrstat=0x5F, after clear 0x0F).
esp32: Core 0 was reset (pwrstat=0x1F, after clear 0x0F).
esp32: Debug controller 1 was reset (pwrstat=0x5F, after clear 0x0F).
esp32: Core 1 was reset (pwrstat=0x5F, after clear 0x0F).
Info : Target halted. PRO_CPU: PC=0x40000400 (active)    APP_CPU: PC=0x40000400
Target halted. PRO_CPU: PC=0x40000400 (active)    APP_CPU: PC=0x40000400
** Programming Started **
auto erase enabled
** Programming Started **
auto erase enabled
Info : Target halted. PRO_CPU: PC=0x4009171A (active)    APP_CPU: PC=0x40000400
Target halted. PRO_CPU: PC=0x4009171A (active)    APP_CPU: PC=0x40000400
Info : Target halted. PRO_CPU: PC=0x4009171A (active)    APP_CPU: PC=0x40000400
Target halted. PRO_CPU: PC=0x4009171A (active)    APP_CPU: PC=0x40000400
wrote 4096 bytes from file c:/Users/andreas/Documents/PlatformIO/Projects/lolin32-arduino-spp-proxy/.pioenvs/lolin32/partitions.bin in 0.582190s (6.871 KiB/s)
** Programming Finished **
wrote 4096 bytes from file c:/Users/andreas/Documents/PlatformIO/Projects/lolin32-arduino-spp-proxy/.pioenvs/lolin32/partitions.bin in 0.582190s (6.871 KiB/s)
** Programming Finished **
** Verify Started **
** Verify Started **
Info : Target halted. PRO_CPU: PC=0x4009171A (active)    APP_CPU: PC=0x40000400
Target halted. PRO_CPU: PC=0x4009171A (active)    APP_CPU: PC=0x40000400
read 3072 bytes from file c:/Users/andreas/Documents/PlatformIO/Projects/lolin32-arduino-spp-proxy/.pioenvs/lolin32/partitions.bin and flash bank 0 at offset 0x00008000 in 0.292752s (10.248 KiB/s)
contents match
read 3072 bytes from file c:/Users/andreas/Documents/PlatformIO/Projects/lolin32-arduino-spp-proxy/.pioenvs/lolin32/partitions.bin and flash bank 0 at offset 0x00008000 in 0.292752s (10.248 KiB/s)
contents match
** Verified OK **
** Verified OK **
Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : esp32: Debug controller 0 was reset (pwrstat=0x5F, after clear 0x0F).
Info : esp32: Core 0 was reset (pwrstat=0x5F, after clear 0x0F).
esp32: Debug controller 0 was reset (pwrstat=0x5F, after clear 0x0F).
esp32: Core 0 was reset (pwrstat=0x5F, after clear 0x0F).
Info : Target halted. PRO_CPU: PC=0x5000004B (active)    APP_CPU: PC=0x00000000
Target halted. PRO_CPU: PC=0x5000004B (active)    APP_CPU: PC=0x00000000
Info : esp32: Core 0 was reset (pwrstat=0x1F, after clear 0x0F).
Info : esp32: Debug controller 1 was reset (pwrstat=0x5F, after clear 0x0F).
Info : esp32: Core 1 was reset (pwrstat=0x5F, after clear 0x0F).
esp32: Core 0 was reset (pwrstat=0x1F, after clear 0x0F).
esp32: Debug controller 1 was reset (pwrstat=0x5F, after clear 0x0F).
esp32: Core 1 was reset (pwrstat=0x5F, after clear 0x0F).
Info : Target halted. PRO_CPU: PC=0x40000400 (active)    APP_CPU: PC=0x40000400
Target halted. PRO_CPU: PC=0x40000400 (active)    APP_CPU: PC=0x40000400
** Programming Started **
auto erase enabled
** Programming Started **
auto erase enabled
Info : Target halted. PRO_CPU: PC=0x4009171A (active)    APP_CPU: PC=0x40000400
Target halted. PRO_CPU: PC=0x4009171A (active)    APP_CPU: PC=0x40000400
Info : Target halted. PRO_CPU: PC=0x4009171A (active)    APP_CPU: PC=0x40000400
Target halted. PRO_CPU: PC=0x4009171A (active)    APP_CPU: PC=0x40000400
wrote 8192 bytes from file C:/Users/andreas/.platformio/packages/framework-arduinoespressif32/tools/partitions/boot_app0.bin in 0.699837s (11.431 KiB/s)
wrote 8192 bytes from file C:/Users/andreas/.platformio/packages/framework-arduinoespressif32/tools/partitions/boot_app0.bin in 0.699837s (11.431 KiB/s)
** Programming Finished **
** Verify Started **
** Programming Finished **
** Verify Started **
Info : Target halted. PRO_CPU: PC=0x4009171A (active)    APP_CPU: PC=0x40000400
Target halted. PRO_CPU: PC=0x4009171A (active)    APP_CPU: PC=0x40000400
read 8192 bytes from file C:/Users/andreas/.platformio/packages/framework-arduinoespressif32/tools/partitions/boot_app0.bin and flash bank 0 at offset 0x0000e000 in 0.295177s (27.102 KiB/s)
contents match
read 8192 bytes from file C:/Users/andreas/.platformio/packages/framework-arduinoespressif32/tools/partitions/boot_app0.bin and flash bank 0 at offset 0x0000e000 in 0.295177s (27.102 KiB/s)
contents match
** Verified OK **
** Verified OK **
Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : esp32: Debug controller 0 was reset (pwrstat=0x5F, after clear 0x0F).
Info : esp32: Core 0 was reset (pwrstat=0x5F, after clear 0x0F).
esp32: Debug controller 0 was reset (pwrstat=0x5F, after clear 0x0F).
esp32: Core 0 was reset (pwrstat=0x5F, after clear 0x0F).
Info : Target halted. PRO_CPU: PC=0x5000004B (active)    APP_CPU: PC=0x00000000
Target halted. PRO_CPU: PC=0x5000004B (active)    APP_CPU: PC=0x00000000
Info : esp32: Core 0 was reset (pwrstat=0x1F, after clear 0x0F).
Info : esp32: Debug controller 1 was reset (pwrstat=0x5F, after clear 0x0F).
Info : esp32: Core 1 was reset (pwrstat=0x5F, after clear 0x0F).
esp32: Core 0 was reset (pwrstat=0x1F, after clear 0x0F).
esp32: Debug controller 1 was reset (pwrstat=0x5F, after clear 0x0F).
esp32: Core 1 was reset (pwrstat=0x5F, after clear 0x0F).
Info : Target halted. PRO_CPU: PC=0x40000400 (active)    APP_CPU: PC=0x40000400
Target halted. PRO_CPU: PC=0x40000400 (active)    APP_CPU: PC=0x40000400
** Programming Started **
auto erase enabled
** Programming Started **
auto erase enabled
Info : Target halted. PRO_CPU: PC=0x4009171A (active)    APP_CPU: PC=0x40000400
Target halted. PRO_CPU: PC=0x4009171A (active)    APP_CPU: PC=0x40000400
Info : Target halted. PRO_CPU: PC=0x4009171A (active)    APP_CPU: PC=0x40000400
Target halted. PRO_CPU: PC=0x4009171A (active)    APP_CPU: PC=0x40000400
wrote 1003520 bytes from file c:/Users/andreas/Documents/PlatformIO/Projects/lolin32-arduino-spp-proxy/.pioenvs/lolin32/firmware.bin in 7.578782s (129.308 KiB/s)
wrote 1003520 bytes from file c:/Users/andreas/Documents/PlatformIO/Projects/lolin32-arduino-spp-proxy/.pioenvs/lolin32/firmware.bin in 7.578782s (129.308 KiB/s)
** Programming Finished **
** Verify Started **
** Programming Finished **
** Verify Started **
Info : Target halted. PRO_CPU: PC=0x4009171A (active)    APP_CPU: PC=0x40000400
Target halted. PRO_CPU: PC=0x4009171A (active)    APP_CPU: PC=0x40000400
read 1003120 bytes from file c:/Users/andreas/Documents/PlatformIO/Projects/lolin32-arduino-spp-proxy/.pioenvs/lolin32/firmware.bin and flash bank 0 at offset 0x00010000 in 3.833799s (255.519 KiB/s)
contents match
read 1003120 bytes from file c:/Users/andreas/Documents/PlatformIO/Projects/lolin32-arduino-spp-proxy/.pioenvs/lolin32/firmware.bin and flash bank 0 at offset 0x00010000 in 3.833799s (255.519 KiB/s)
contents match
** Verified OK **
** Verified OK **
Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : esp32: Debug controller 0 was reset (pwrstat=0x5F, after clear 0x0F).
Info : esp32: Core 0 was reset (pwrstat=0x5F, after clear 0x0F).
esp32: Debug controller 0 was reset (pwrstat=0x5F, after clear 0x0F).
esp32: Core 0 was reset (pwrstat=0x5F, after clear 0x0F).
Info : Target halted. PRO_CPU: PC=0x5000004B (active)    APP_CPU: PC=0x00000000
Target halted. PRO_CPU: PC=0x5000004B (active)    APP_CPU: PC=0x00000000
Info : esp32: Core 0 was reset (pwrstat=0x1F, after clear 0x0F).
Info : esp32: Debug controller 1 was reset (pwrstat=0x5F, after clear 0x0F).
Info : esp32: Core 1 was reset (pwrstat=0x5F, after clear 0x0F).
esp32: Core 0 was reset (pwrstat=0x1F, after clear 0x0F).
esp32: Debug controller 1 was reset (pwrstat=0x5F, after clear 0x0F).
esp32: Core 1 was reset (pwrstat=0x5F, after clear 0x0F).
Info : Target halted. PRO_CPU: PC=0x40000400 (active)    APP_CPU: PC=0x40000400
Target halted. PRO_CPU: PC=0x40000400 (active)    APP_CPU: PC=0x40000400
PlatformIO: Initialization completed
PlatformIO: Resume the execution to `debug_init_break = thb app_main`
Cannot execute this command while the target is running.
Use the "interrupt" command to stop the target
and then try again.
Info : Target halted. PRO_CPU: PC=0x400D2DB8 (active)    APP_CPU: PC=0x401866EA
Target halted. PRO_CPU: PC=0x400D2DB8 (active)    APP_CPU: PC=0x401866EA
Info : Detected debug stubs @ 3ffc6010 on core0 of target 'esp32'
[New Thread 1073464968]
[New Thread 1073463556]
[New Thread 1073467660]
[New Thread 1073455812]
[New Thread 1073445316]
[New Thread 1073446544]
[New Thread 1073457052]
[Switching to Thread 1073462144]

Temporary breakpoint
1, app_main () at C:\Users\andreas\.platformio\packages\framework-arduinoespressif32\cores\esp32\main.cpp:24
24	{