UDOO X86
GET STARTED X86 – UDOO
UDOO X86 Documentation
nRF51822: Bluetooth low energy and 2.4GHz proprietary SoC
BMI160: 16-bit inertial measurement unit
Intel Curie
Arduino 101 / Genuino 101

[ESC] to go to BIOS

$ inxi -Fxz
System:    Host: udoo-x86 Kernel: 4.15.0-36-generic x86_64 bits: 64 gcc: 7.3.0
           Desktop: Cinnamon 3.8.9 (Gtk 3.22.30-1ubuntu1) Distro: Linux Mint 19 Tara
Machine:   Device: laptop System: SECO product: UDOO x86 v: Version serial: N/A
           Mobo: SECO model: UDOO x86 v: Board Version serial: N/A UEFI: SECO v: 1.01 date: 02/20/2017
Battery    hidpp__0: charge: 50% condition: NA/NA Wh model: Logitech M705 status: Discharging
CPU:       Quad core Intel Celeron N3160 (-MCP-) arch: Airmont rev.4 cache: 1024 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 12800
           clock speeds: max: 2240 MHz 1: 493 MHz 2: 1026 MHz 3: 480 MHz 4: 480 MHz
Graphics:  Card: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller
           bus-ID: 00:02.0
           Display Server: x11 (X.Org 1.19.6 ) drivers: modesetting (unloaded: fbdev,vesa)
           Resolution: 1280x1024@60.02hz
           OpenGL: renderer: Mesa DRI Intel HD Graphics 400 (Braswell)
           version: 4.5 Mesa 18.0.5 Direct Render: Yes
Audio:     Card Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series High Definition Audio Controller
           driver: snd_hda_intel bus-ID: 00:1b.0
           Sound: Advanced Linux Sound Architecture v: k4.15.0-36-generic
Network:   Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169 v: 2.3LK-NAPI port: 1000 bus-ID: 02:00.0
           IF: enp2s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: NA (-)
           ID-1: /dev/mmcblk0 model: N/A size: 31.3GB
Partition: ID-1: / size: 29G used: 13G (49%) fs: ext4 dev: /dev/mmcblk0p2
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 53.0C mobo: 53.0C
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 192 Uptime: 0 min Memory: 476.1/3852.9MB Init: systemd runlevel: 5 Gcc sys: 7.3.0
           Client: Shell (bash 4.4.191) inxi: 2.3.56